I’d say the dishwasher location isn’t ideal but there wasn’t another option/would have to run new plumbing etc. the corner cabinet is just shelves but you could install something that pulls out if you wanted! I believe rev a shelf sells something for this

@@EmmaCourtneyHome thank you! Yes, our dishwasher is to the right of the sink, so we’d do our garbage pull out on the left. But then need a solution for the awkward corner there. What design software did you use for it all?

Sketchup!

I’d take a look at the ikea kitchen planner. I believe they have some drawers that would work with the doors!

Everything is linked in the description. Please note that each item comes in various sizes and may not automatically populate on what I purchased when you click the link

They’re brand new kitchen units from IKEA, the Sektion line

That’s amazing! You’ll have to show me how it turns out xx

Yes of course@@EmmaCourtneyHome

I was able to work around it!

Hi Augustine, you could do this but it won’t be as easy to attach baseboard. Part of the reason why I love doing a 2x4 base is the ease of attaching baseboard after! I also think the 2x4 base might be cheaper than the legs? But both work!

No it hasn’t chipped! I used the red can of BIN zinsser

Have you checked to see if any pax doors might work? I think the height might but unsure about the width coordinating with the cabinets that you need for your space. Alternatively I might try to see if Home Depot and other stores have a door that might work in their off the shelf kitchens? Another idea I would try is see if I could put a piece of trim/wood to fill the 10” gap but that’s pretty large so I hope the previous ideas might work.

@@EmmaCourtneyHome So we could use the Pax doors if we put two 2x4s in between the 36 inch wide cabinets to make the 39 inches that two pax doors combine to make width wise. But then we would have to attach hinges on the 2x4 facing forward as opposed to hinges inside on the side of the cabinet. Have you ever used hinges that you place on the outside of a cabinet?

Hmm I don’t have experience with that! I’m sorry!! I’d try to check other options like Home Depot and maybe that will work?

Try buying quarter round, and flipping it so it’s above your baseboard and 1 flat side touches the wall above the baseboard and the other flat side will be the bottom of the board and batten! Hope this makes sense … it should make it look like an extension of the baseboard

I have everything linked in the video description box, and more details can be found here emmacourtneyhome.com/diy-art-frame-tv-hack/

A few different ways such as using equations… but in the initial planning stage we just measured the height from the floor (at the wall) to the ceiling, and then measured how deep we wanted it, and then from the floor to the ceiling in that spot as well

Awh you’re so welcome!!

Here are the detail: Alexandria Moulding 3/8-inch x 1 1/4-inch x 8 ft. Basswood Panel Moulding www.homedepot.ca/product/alexandria-moulding-3-8-inch-x-1-1-4-inch-x-8-ft-basswood-panel-moulding/1000153156

Hey Kim, everything is linked in the description box plus I have a blog post with more details and links emmacourtneyhome.com/ikea-sektion-built-in-wardrobe-for-sloped-ceilings/

@@EmmaCourtneyHomep