BigFrogs4x4

Пікірлер

@09ksteinbacher Күн бұрын

Am I able to delete the turbo converter and add a new downpipe or do I need to do the full delete?

@BigFrogs4x4 Күн бұрын

You don't need to delete, just remove the old pipe and install the new one.

@BigFrogs4x4 Күн бұрын

There is a video what was needed to remove the old pipe as well

@09ksteinbacher Күн бұрын

@@BigFrogs4x4I watched both videos just wasn’t sure on the filter behind the turbo that acts ate a muffler for the turbo. I just wanna be able to hear my turbo haha and that “muffler” is the problem.

@BigFrogs4x4 Күн бұрын

@09ksteinbacher I don't know of anyone who builds delete tunes anymore

@thaddeusbarrick8432 Күн бұрын

Felt that one

@jamesmccarn7775 4 күн бұрын

I use a drinking straw

@jasonalward4720 5 күн бұрын

Thank you, mine just stopped working mysteriously when my wife’s sister used my Jeep, I don’t know, it didn’t work when I tried to move it so I thought it did NOT have tilt steering!! “ “ I know how to fix stuff breaking on my 25 yr old 49th edition XJ!! Stop letting people use er’ !!

@BigFrogs4x4 5 күн бұрын

Lol 😂

@patriot72 7 күн бұрын

Amen brother! George Lomprey Here! Jesus Christ Is My Lord And Savior, And I Believe In My Heart That God Has Raised Him From The Dead! Romans 10:8-9 And I Am Filled With His Holy Spirit! Jesus Is Alive In Jesus Name! Praise Jesus Always And Forever In Jesus Holy Name! Amen!

@heimonphawa5438 7 күн бұрын

Praise the lord 🙏

@lambertsaldi1550 7 күн бұрын

Happy new year and God bless 🙏

@ascendantrobin3230 8 күн бұрын

i replaced my blower resistor recently and now theres terrible airflow, gonna try this, makes sense!

@eddiemartinez651 11 күн бұрын

amazing video ! thank you so much .

@BigFrogs4x4 10 күн бұрын

Glad to help

@photographcenter8456 11 күн бұрын

On a L5P delete I’m downing a 5in straight pipe. What’s the biggest down pipe I could do and what’s the best down pipe size I should do? Also is there advantage removing vs unplugging Egr?

@SR71mydream 12 күн бұрын

Thank you I have reached the maximum life of RC ball joints after 30k miles. How does that truck just have shocks in the front and not struts?

@BigFrogs4x4 12 күн бұрын

Uses torsion bars

@stretchIvc1 12 күн бұрын

So you don't have to disconnect the battery 🤔

@kevinbutton4580 13 күн бұрын

So my 2.8 colorado is in the shop because it had an emission service now I got told the whole system needed replaced but now he did a force regen and now all of sudden it just needs a heater? Could the regen cycle save the rest of the system you think? Or is the problem I was having gonna come back?

@rogersweet_OP 17 күн бұрын

I just got mine today. I'm putting it on an '06 Volkswagen Touareg. I would contact open road and I'm sure they'll send you a new hinge. And then loosen up those nuts at the end of the steel or aluminum bracket, and you shouldn't have any more problems! Good video!

@BigFrogs4x4 17 күн бұрын

Thanks, I do plan to reach out but will probably still make aluminum ones

@rogersweet_OP 12 күн бұрын

@@BigFrogs4x4 If you have the skills, go for it! If you want to sell a set. Let me know.

@BigFrogs4x4 11 күн бұрын

@@rogersweet_OP they are sending me a new leg. They said the next gen awning will have metal leg hinges

@FrankGraziano-z2k 18 күн бұрын

My 2021 colorado does not have that metal plate or pins. WONDERING WHY?

@BigFrogs4x4 18 күн бұрын

They may have redesigned the brakes on the newer trucks

@thaddeusbarrick8432 23 күн бұрын

Merry christmas man. I wasnt gonna bother you today since your son is hope. Im so glad he got the chance to be home for christmas. Hope your all doing well with hapiness and full bellies

@lambertsaldi1550 23 күн бұрын

Happy Holidays 🇺🇸🌲🇺🇸

@patriot72 28 күн бұрын

Praise Jesus brother!!

@BigFrogs4x4 27 күн бұрын

It's all because of HIM!

@thaddeusbarrick8432 28 күн бұрын

Powerful message

@BigFrogs4x4 28 күн бұрын

God laid it on my heart to write this and today I had time

@abeszehar7786 Ай бұрын

Merci

@Chicken-ine Ай бұрын

I live in Hedgesville West Virginia. RIP Georgia.

@Chicken-ine Ай бұрын

Georgie. Dang autocorrect!

@zo2ahy Ай бұрын

Great video! Thanks for leaving in the part where you found out the lug nuts were too tight. Very informative!

@BigFrogs4x4 Ай бұрын

Here to help

@BigFrogs4x4 Ай бұрын

Don't forget to like and share!

@thaddeusbarrick8432 Ай бұрын

Very nice

@BigFrogs4x4 Ай бұрын

Don't forget to share if you want 😉

@thaddeusbarrick8432 Ай бұрын

@BigFrogs4x4 didnt know if it was a private video or not

@BigFrogs4x4 Ай бұрын

@thaddeusbarrick8432 nope, made it public for our military. Didn't monetize it either. Not looking to make money on the backs of our brothers and sisters in uniform.

@thaddeusbarrick8432 Ай бұрын

@@BigFrogs4x4 so proud of that

@daveflood954 2 ай бұрын

To the point and on point. Thank you.

@kentcross4172 2 ай бұрын

My truck is not sealed is this service bulletin for Canada as well ?

@BigFrogs4x4 2 ай бұрын

That I don't know. I'd say call the dealership with your vin number. If it's leaking, have it done.

@jimverw5863 2 ай бұрын

Do you have the model number for those bump stops ? Looking at some on Amazon, want to get the same ones you have .

@BigFrogs4x4 2 ай бұрын

Links are in the video description for each part. amzn.to/2PIIOBZ

@BigFrogs4x4 2 ай бұрын

amzn.to/2BnVSTd

@jimverw5863 2 ай бұрын

Thanks. I ordered them yesterday, they looked like the ones you had used.

@JackJensenTrader 2 ай бұрын

You might want to say what year it is, too. And the 3.8 qt is probably including the filter, but since you pre-filled the filter, it would only be 3.5 qt.

@deeejayeee 2 ай бұрын

warning to zr2 owners, once out of warranty you'll go bankrupt replacing shocks at $1800 to $2000 / shock. In fact, all GM parts have increased 200 to 300 % thanks to our government policies and inflation.

@rickbadessa4897 2 ай бұрын

Saw some mistakes here... Most of your audience is going to be novices... Tourqe specs are a must... Also save yourself a headache down the road... Leave a little screw out it's only needed for assembly on the line sorry bro

@crumscorner6643 3 ай бұрын

How are you older then me and not a gray in your beard 🤔

@BigFrogs4x4 3 ай бұрын

Good genes

@tylerdurden9748 3 ай бұрын

wrong it takes 75-90 manual transmission oil. damn yankees.

@BigFrogs4x4 3 ай бұрын

Not according to amsoil for this year and transmission of cobalt. It has 220k miles on it and still running good

@tylerdurden9748 3 ай бұрын

@@BigFrogs4x4 I will go with GM's recommendations over an aftermarket company.

@Jeff-tg5ls 18 күн бұрын

I'm on my 3rd Cobalt. 294k on the current one. It uses dexron vi

@tylerdurden9748 18 күн бұрын

@@Jeff-tg5ls Again, I'll use what is what the GM owners manual says to use.

@monteclark1115 3 ай бұрын

Using the frame for a return path for the negative is fine, just make sure you also use the same size cable to connect your frame to your battery and engine block.

@suetaylor1127 3 ай бұрын

yeah how do you get that part off the jack to install the fricking beam? u left out the only part i needed help with

@BigFrogs4x4 2 ай бұрын

I'm guessing you are talking about the lift plate? Take out the center bolt on the plate.

@customaniac 3 ай бұрын

oil filter 3/4 turn

@BigFrogs4x4 3 ай бұрын

Yes, once the gasket/o ring touches the engine surface, 3/4- 1 turn. Each filter gasket is different per brand. Some a little thicker or softer so it may have to vary.

@Dominierenn 3 ай бұрын

I worked the spider gears out trying to get a rotor off with the gear puller.. basically the pin goes through the smaller gears & the big washer plates? Is there anything else I should watch out for?

@Dominierenn 3 ай бұрын

I got it fixed. It wasn't as bad as I thought.

@Dominierenn 3 ай бұрын

Turns out the rotor wasn't rusted on, the brake shoe was sticking to the rotor. Had to turn the star wheel back. Sure am glad I didn't break anything with that gear puller stunt.

@BigFrogs4x4 3 ай бұрын

@patw4469 oh ya! That can happen! Mostly happens to me on Older rust vehicles

@Dominierenn 3 ай бұрын

@@BigFrogs4x4 for sure. I definitely had to think outside the box with getting the spider gears back into place though. As a safety precaution, I put the tire back on, on the side I had completed. But it turned out to be very useful to have the tire back on in this predicament. So after turning one of the spider gears in halfway across the 2 horizontal gears, I put the other gear in. I quickly realized the other spider was going to fall out again if I didn't have another hand on it. With both hands full, I was then wondering how I was going to turn them the rest of the way to hover over the pin holes! So I took my foot and spun the tire while I held the gears in place 😅 but it worked! I stuffed that pin in there as quick as I could and moved on with life.

@BigFrogs4x4 3 ай бұрын

@patw4469 sometimes a friend can be invaluable. When we don't have 1 we improvise. Well done!

@psycosurfing 4 ай бұрын

Thank you 👍

@int53185 4 ай бұрын

Just ordered the 72" with a hutch. Looks good quality

@BigFrogs4x4 4 ай бұрын

4 years and no major issues. Love the size. Mainly the depth. Now they sell an 84" box

@ZackWilliamson-p5t 4 ай бұрын

When putting the truck in neutral to turn the drive shaft. Do you recommend putting the truck in neutral with the column shifter and turning it off (some lights still stay on) or removing the linkage next to the transmission and manually shifting to neutral?

@BigFrogs4x4 4 ай бұрын

I click the ignition switch just far enough forward to shift it into neutral and turn off as much as possible light wise. If it's going to take a while put a battery charger on the battery.

@ZackWilliamson-p5t 4 ай бұрын

@@BigFrogs4x4 thank you!

@BigFrogs4x4 4 ай бұрын

@@ZackWilliamson-p5t that's what I'm here for

@T-_R-_E-_Y 4 ай бұрын

Thanks!

@JMillStead26 4 ай бұрын

can you help me find a how to replace the shifter assembly due to broken selector flag in a 2009 cobalt ls automatic on floor? Plz&TY

@BigFrogs4x4 4 ай бұрын

I have not seen a video like that yet. Might just be in a manual book.

@JMillStead26 4 ай бұрын

@@BigFrogs4x4 THANX.. I found instructions on that and a video focusing on the shifter cable removal which should help me do it.

@BigFrogs4x4 4 ай бұрын

@JMillStead26 awesome!

@JMillStead26 4 ай бұрын

@@BigFrogs4x4 Your video helped me during the hardest part, though I bent the retaining clip andwil need to order a new one. It is changed and working.Than you!!

@BigFrogs4x4 4 ай бұрын

Good to hear!

@mauricioh6716 4 ай бұрын

Blessings, Jesus loves you. “For God so loved the world that He gave His only begotten Son, that whoever believes in Him should not perish but have everlasting life.” ‭‭John‬ ‭3‬:‭16‬

@BigFrogs4x4 4 ай бұрын

Amen!