Radio Geek

Пікірлер

@wg99er 5 күн бұрын

How do you listen to private calls? Like do you have to select the private call option in the cps or do you have it on promiscuous mode?

@harihendaryanto Ай бұрын

great video!! i've just flashed my mikrotik hap ac2 with aredn f/w. it's up and shown in map(YD0BCX). i don't know what tp do with it 🤣

@carloscamargojr3228 2 ай бұрын

Where can I buy a deck, I have the remote control head. And what’s the name of it? Or is there a link you could share

@PhilipViola 2 ай бұрын

Anyone run with a volunteer company that uses this pager? I am curious if a tone will trip the pager on 800mhz. We have both UHF & VHF and are looking to go all UHF now but don't know if this will work for us.

@jessiah5209 2 ай бұрын

As far as I know they do

@cperkinson9 3 ай бұрын

Been trying and trying get pager G5 to decode Harris and Tait systems, but it will not work, and I am not to fimilar what to change or anything.

@nol_yaw 3 ай бұрын

can i ask you if i wanted to listen to these frequencies 152.6825c 152.7125c 161.875 162.000 and then my next site 152.8175c 161.800 would 2 dongles be enough. i'm thinking about getting a third one just don't know if i would need it. thanks

@RadioGeek 2 ай бұрын

In theory yes, each dongle will handle about 2.4 MHz of bandwidth. So one will hear all the 152MHz traffic and one will hear all the 161/162 traffic.

@RSatira 3 ай бұрын

I am having difficulties with setting up which tones go off for on-duty vs off-duty. Any chance you can help?

@nathangrobelny8702 3 ай бұрын

Where do you get the radio reference login?

@RadioGeek 3 ай бұрын

You will need to go to radio reference and create an account, software downloads are only available for premium members.

@i8BBQ4Lunch 4 ай бұрын

Since you don't expand on this installation on a regular video, it would be nice if you list the actual components. 73

@billheyde6932 4 ай бұрын

Aloha. Great instructive video and still relative a few years later with new AREDN & MikroTik updates. Had to install AREDN software on a LHG5 antenna, and it was helpful as well. After I used the theory you presented to figure it out. Could not find anyone who actually shows how to do it on a new dish. But some thinking and your video helped a lot.

@Ghost_Swe 4 ай бұрын

Analog/P25/DMR ?

@KE8ODY-WV-Ares-Ham-Dad-3O4 5 ай бұрын

To much

@wred8853 6 ай бұрын

How did you set this up

@KE8ODY-WV-Ares-Ham-Dad-3O4 6 ай бұрын

How was programming do I need to buy extra stuff

@AEFI261 3 ай бұрын

I have an sds100 the programing is easy and you need a mini usb to update the database just letting you know its completely free then just put your zip in the radio

@414RadioTech 6 ай бұрын

I'll take it if you're selling it I live in Waukesha

@archuka1 7 ай бұрын

Thanks but you kinda did that a bit fast for me to understand -- rookie here lol

@RadioGeek 7 ай бұрын

Feel free to pause during the video

@abgcapital4597 7 ай бұрын

Is it possible to use 110 watts on p25 conventional ?

@RadioGeek 7 ай бұрын

They do make a High power version for VHF, I have it in one of my vehicles. Usually there is not much need for 100 watts these days with most systems built for portable coverage.

@RadioNoahW 7 ай бұрын

Hello, can this scanner pick up a Motorola type ii system and list all the talkgroup ID’s, hexadecimals, and all the system information? I’m asking because a system I want to monitor in my local area does not show any talkgroup information on radio reference unfortunately. Is this possible to find it myself through this scanner?

@RadioGeek 7 ай бұрын

Yes by using this scanner you will be able to find talkgroup info, I would also suggest using DSD+ or UnitTrunker depending on the type of system.

@RadioNoahW 7 ай бұрын

@@RadioGeek I’m trying to monitor an 800MHz analog trunking system, so there are cheaper ways to do that without paying $600 to buy this scanner?

@RadioNoahW 7 ай бұрын

@@RadioGeek I actually have a Uniden BCD436HP, is it possible to find trunking tgids and hexadecimal information that isn’t already on the database on my BCD436HP? Any help would be great.

@kc0arrl 7 ай бұрын

@@RadioNoahW I don't have the 436 I have the 536 and you can setup a favorites list for the system you want to monitor and set it to Talkgroup Search instead of scan, you can also use trunking discovery mode to find the talkgroups.

@RadioGeek 7 ай бұрын

I would check out RTLSDR with UnitTrunker 2, you can get up on the air for about $20

@ronwa8yih937 8 ай бұрын

Nice video! I was able to get my PowerBeam M flashed using TFTPD64 as you kindly demonstrated in your video. 73 and happy New Year! (2024)

@carterjamison1 8 ай бұрын

Can I do this on a Mac?

@RadioGeek 8 ай бұрын

I am not a MAC guy, so I will preface this with I don't know. The instructions on the AREDN website are for Linux and Windows. There are a ton of people in the forums that are really helpful it might be worth asking. Here are the official updated instructions - docs.arednmesh.org/en/latest/arednGettingStarted/installing_firmware.html#mikrotik-first-install-process

@bradjackson3020 9 ай бұрын

Hello Friend! Is there anyway you can still do the video talking about the cross band repeater function of this radio? would love to see the different ways of using this function in video format! Cheers my friend Brad

@user-le8zl3nw8t 10 ай бұрын

Great video, thanks! I have hold enabled on my G4, but do not see an option for block. Any suggestions? Thanks!

@DBruno 10 ай бұрын

Thanks for sharing! I'm running two and will add a few more. I'll need to add a pre amp though I think. How did you get the alias to work? Maybe just an area thing?

@lawrencemazel9182 10 ай бұрын

Very cool I have Vl

@thefieldphoneguy8254 10 ай бұрын

kzbin.info/door/yRGsbwgVp2IQwRwCoIducw

@mihaselic 10 ай бұрын

Ras active or not?

@kc0arrl 10 ай бұрын

RAS is not active

@masonpletz7033 11 ай бұрын

Could this be done in a VHF/VHF/800/800 deck configuration? Is the repeater a standard function? Would I be able to repeat a firegrounds traffic onto a dispatch channel and so forth?

@RadioGeek 10 ай бұрын

You can use any combination of bands even all of one band. Yes you could do that, however crossband repeat only works on conventional channels.

@masonpletz7033 10 ай бұрын

@@RadioGeek So I couldnt crossband repeat an 800mhz channel over to a VHF fireground channel?

@RadioGeek 10 ай бұрын

@@masonpletz7033 You can if they are both conventional, but not trunking. You could pair it with the Pyramid VRS to do it with trunking.

@koala_1197 11 ай бұрын

Clear TG

@805drifter 11 ай бұрын

Can normal internet users access services advertised via Aredn? Or are services limited to Aredn users? Do Aredn devices have outbound internet connections through somewhere in the network? What type of cybersecurity precautions should be implemented to prevent unauthorized use of services?

@RadioGeek 10 ай бұрын

No normal internet users cannot access the network without advanced networking configuration. AREDN device can be allowed to the internet but that is not a requirement, the network can exist as a internal network only, with no WAN connections. The network can be as secure or as insecure as you make it.

@805drifter 10 ай бұрын

Thank you. So I’ll treat it as an insecure internal network. Appreciate the response!

@kc0arrl 10 ай бұрын

@@805drifter Unless you set up the network I won't be doing banking or other personal stuff on the network. If you set up your own you could change the SSIDs and SSH keys to keep unauthorized users off. It will never be a enterprise level secure network.

@dannytango36 11 ай бұрын

For a low low price of 10k dollars.

@kc0arrl 11 ай бұрын

Not sure where you got your quote but mine with three decks with all the options was about 6k list without any discount.

@silasmarner7586 Жыл бұрын

Thanks for putting your time and effort into this! JW

@micjubba709 Жыл бұрын

Trx1 does it like they aint private

@sdriza Жыл бұрын

Worth it?

@RadioGeek Жыл бұрын

If you have P25 Simulcast systems in your area, yes. It is also preprogrammed with free updates.

@pipesmoker4238 Жыл бұрын

I have added more than one site but from what I can tell it does not scan the sites. Appears to just fix on one site. Am I missing something. Example. One township has two site which I installed. I did not receive anything. I uninstalled one of them and would pick up all transmissions. I compaired reception against my sds200 to be sure. Your thoughts.

@Evilmojo187 Жыл бұрын

Does software work on a mac?

@RadioGeek Жыл бұрын

It is windows only

@Porty1119 Жыл бұрын

I absolutely love this feature on my VP6000, and just ordered a VM5000. Having it on a mobile will be even better!

@waltsnyder886 Жыл бұрын

it's telling me please select the profile to be edited first what am i missing

@JCourts2k23 Жыл бұрын

I really want to be able to sit down and be able to program my own pager, and make changes. I just dont understand it. When it says creat new zone and knob, what if i want it all on the same zone, but different knobs..and not make a new zone.

@kc0arrl Жыл бұрын

Once the new zone is created you can copy the knob function into a different zone by right clicking on it

@klr650hub5 Жыл бұрын

After i hit program my computer says program successful but the radio says unprogrammed.Any help?

@JCourts2k23 Жыл бұрын

Im still confused…i just got a VHF/UHF G5, and had it programmed for me. I have P25 on knobs 1,2, 3, but all the rest are VHF and 4 iscans all the local VFDs, then the rest are each VFD individually. Id like to delete knob 3 that has a P25 Fire dept i dont want anymore, and put a local Sheriff’s dept thats still not digital, but dont know how.

@JCourts2k23 Жыл бұрын

Can you please do a new programming video, showing the latest PPS Version, and how to program for beginners. They come out with new stuff, and dont even explain how to use it..

@edgardoarroyo Жыл бұрын

How can you program below 450? I want to program 445MHz TX and 450MHz RX. Thanks!

@kylezanni9195 Жыл бұрын

The programming software should just allow you to plug it in. The only problem is depending on what it was programmed before you might have to turn the front end for better RX.

@MargateFL33063 Жыл бұрын

Great test. Can you do a test on a repeater in digits mode a few miles down the road? I like to see in-building coverage with a repeater across town. Also, can you do a simplex test again in digital mode?

@kimjayme357 Жыл бұрын

can you monitor (RX only) repeaters with RAS?

@RadioGeek Жыл бұрын

As long as there is something being transmitted over the air and you are on that frequency yes. If it has any type of encryption no.

@chrisbear1217 Жыл бұрын

Would really like to program tone 3, can you provide numerical set up?

@nilpo Жыл бұрын

I've been going crazy trying to get this to work. Is this method still viable with current hardware? The hAP ac lite doesn't seem to perform a PXE boot. Also, Tiny PXE is blocked by many AV softwares now due to embedded trojans. You'll want to use an alternative PXE/BOOTP server.

@RadioGeek Жыл бұрын

Many firewalls block tinyPXE ports, it is not a trojan. This is still the process for current Mikrotik devices.

@nilpo Жыл бұрын

@@RadioGeek I tested it with as many AV brands as I have available. All of them detected Trojans. Upload to VirusTotal and 10 of their engines detect Trojans as well. This is code analysis. It's not blocking ports because it isn't even running yet. Many browsers also block it's download pages for the same reason.

@joewillj Жыл бұрын

Thanks so much! This was very helpful!

@stevebeaumont3141 Жыл бұрын

Looks good mate 👌

@GateKommand Жыл бұрын

Basically a "build your own system" system!

@ManuelPinner Жыл бұрын

Icon had a Radio like this in the 90s,

@straightpipediesel 7 ай бұрын

Yeah, IC-900A. Had up to 6 modules (10 m, 6m, 2 m, 70 cm, 220 and 1200 MHz) and the head was connected to the deck stack via a single fiber optic cable.

Ең жақсы KZbin

Пікірлер