Keep adding them till it stops leaking 😃

Yes, cleaning out around buildings rapidly "buys" farmland. Already paying taxes on it. Parking equipment tight and organizing can increase farm output substantially. Cutting back fence rows is important too.

That smaller rear disc on the outside is to help with the disc not ridging in soft ground . Let your drawbar swing so you can turn the disc instead of scuffing it across the ground on a turn. 👍😎✌🏻

It's hard to hear you.

Keawanee, I think.

I dont know any where to look for markngs when I was a youg lad many years ago our neighbor had one just like yours he pulled with a farmall m and I just read that bush hog bought KEWANEE OUT'

That is probably a 8ft KEWANEE disk and those outside blades are smaller so it leaves a smaller outside furrow all a guess but I tryed

I think that is a KEWANEE DISK.

Dang, that's a steal on the disk.😮

G day Yes doggies was quite interested. I think 4 th gear about 5-1/2 mph Many yrs our neighbour had field fire, grain be bindered. Dad went down withsw-6 & 3 furrow, another neighbour come with sw-6 & 3 furrow plow My mom said rosary, it came up to next farm 1 away from ours. I will never forget dad came home face all red Ths

JB weld is definitely in every redneck tool box. Way cheaper than a new tub. Good luck with the new seals too.

Metal to the out side want to cup the 0il

Cool factor high. Dad, and my eldest Brother each had a bobsled would make nice lawn art. Particularly around the holidays. As i recall they were mostly of wood construction.

Just put the The two seals in an in will see if I to works it's not that important it's on the out side as long as it's not internal

I think you’re on the right track. I’d use two seals if I were doing it. You must have a bad ass file to cut the burrs on that shaft!

Looks like a good find! There is a manual solution for any of the antique equipment you find in the future that are missing their hydraulic cylinders or using a tractor without remote hydraulic ports: my pull behind AC WD-era brush hog has a cargo rotary-ratchet chain binder instead of a hydraulic cylinder bolted in place. Could be original or just painted persian-orange since then but it works well for height adjustments between field and road.

Looks like an old farmall.

the shaft may have an area that's worn down where the seal was running, so it will leak again. There are thin sleeves made to drive on the shaft over the worn area where the seal rides. That way the new seal has a perfect new sealing surface. The feather of the seal always goes toward the oil. Don't install the seal dry.

Hell Put 3 in if they fit😂

One face in and the other face out smooth parts together

Shaft is pooched no amount of seals going to help.

I put two seals open part seal on inside for both them.

At least the harness is simple enough to replace easily

First seal goes with metal on seal out. So it holds oil in the case

I was wondering where you were a shop teacher. Have a friend that teaches at Macomb.

I did 2 on mine👍👍

Copper was $ 3.20 last time I sold some.

I went with two, but I smeared grease between them.

I put two on both facing opposite of what you had originally, just pack the space between it with grease

From the factory, they only came with one, many people install two on it though. With the seal cover off, drive one facing away from it, and install permatex around it, then press the other seal in as normal. Should never leak a drop after that

Correct on the seals. Wrap electrical tape on the PTO sfat and grease, so you done damage the seals going back together

Very interesting, can hardly wait to see Her running. 😊

Interesting Ths

Not only is that war time tractor cool as hell. But those things practically run for ever. Repairs are necessary now an then. But not often, just keep on running. Love em.

Come summer time, watch your Go-Prons from lockups and possible battery short-life.

Growing up we had several H ,M and WD9 tractors. None of the H ,or M had fenders. I think it's great that you are saving those tractors. 😊

I've never been around M M really, when I was a kid, we had a friend that had one married to a M FARMALL . It seemed to work well for him. I enjoy watching your channel for sure. THANKS 😊

Fuzzy mic hanging down over top ofvscreen

can’t hear

Nice to see this project getting finished!

You guys are rich in tractors, gotta love that. 😊

G day Interesting were filter is Up here in Ont there was only 1 that I know of. Not many here. Ths

Key word gentle

Pack those cylinders with dry ice

Where can I get a carburetor for that exact one

I have faith. Those were good tractors. I see that is gasoline.

G day Good luck on that Ths

Squatch253 and Just a Few Acres Fam did a couple really nice working paint jobs

Glad to see it’s salvageable. How’s the Moline engine swap doing?

Get out the hot wrench