I got the 3L. I want a smaller bag and I’m a woman.
@mixtape514322 күн бұрын
Thank you for watching and adding to the conversation! I hope your new bag works great for you! Cheers - Jade
@LaveaFirmisАй бұрын
The AF is why I have left Nikon mirrorless. The AF is so unreliable on the Z6 II I have to over shoot to get something usable. I can't be part of a system that can't focus. I never felt at one with the Z6 like I did with the D500. So I've switched to the A7 IV and it's like being at one. The AF is so quick and reliable even in near total darkness somehow it will focus. The only issue I found is the EVF is fairly poor and judging exposure just by the screen isn't as easy as the Z6. The highlights often look over exposed in the EVF and they are actually no where near but I will get used to it, it's worth it.
@mixtape5143Ай бұрын
Thank you for sharing your experience and thoughts!
@43rdMusicАй бұрын
I loved my X-H2 and xf 16-55mm until Fujifilm broke the AF-C. I shoot mainly stills and I have some many pictures that have come out blurry with their recent “firmware” updates. I am not going to sink anymore money into this company. Such a huge let down. I already started moving over to Canon. I couldn’t be happier. I’d say, if you like Sony, make the jump. It’s hard to trust #Blurryfilm and their business from here on out.
@LaveaFirmisАй бұрын
@@43rdMusic Yeah I had to go back to single point because at weddings the eye AF would grab guests at the side of frame, rather than the bride stood in the middle of shot. I also had the Z6 II miss focus entirely whilst on a tripod looking at a landscape and would only get it right after spinning the focus ring to throw it further out. I mean that couldn't be an easier job for a camera these days and it couldn't always do that. People say the Z6 III is better but in tests it's still behind Sony, so why wait and hope just switch to the one that already works and has a massive lens choice. I was tempted to go Canon too but went Sony.
@benallmark96712 ай бұрын
I was hoping to see the hotel bathroom
@eruaenelope57352 ай бұрын
How to turn off auto iso
@mixtape51432 ай бұрын
Adjust your ISO setting to any selection other than the A. I hope that helps.. :)
@seal777ful3 ай бұрын
Thank You !
@jaygreer74304 ай бұрын
I own the clip. I just bought it and didn’t realize it had the lock you mentioned. Thanks for the video!
@mixtape51434 ай бұрын
@@jaygreer7430 Thank you for letting me know it was helpful, I greatly appreciate, cheers! 🤙
@Joey-bq4hu4 ай бұрын
Great review and appreciate you taking the time to show some different storage configurations, which was very helpful!
@mixtape51434 ай бұрын
Thank you for your feedback, I greatly appreciate it! 🤙
@fadifidou82835 ай бұрын
Hello .I have a problem connecting the dji mavic 2 pro remote control to my phone. I use a micro USB RC to type c cable. When I turn on the radio control it connects and the application launches but it disconnects quickly and it connects again and so on. And I have another problem. When I turn on the drone, the camera stabilizes after 2 min and starts to vibrate and starts turning in all directions
@davebell85965 ай бұрын
Very helpful , and a very good photographer 👍
@mixtape51435 ай бұрын
Thank you, I greatly appreciate that! 🤙
@JAPAN-BLACK5 ай бұрын
Great video. I recently purchased a used one. Any advice on the tension settings? (+ -)
@mixtape51435 ай бұрын
I unfortunately don’t have this slider anymore and am useless for any suggestion on a tension setting… 😞🤙
@tavares41406 ай бұрын
Muito bom belo video
@brendanclark817 ай бұрын
Great video demonstration using reasonable gear! I'm heading to Disneyland & CA in June and want to pack a minimalist photography kit. This video is inspiring to see that great shots can be made on kit lens focal lengths.
@dreamdisturber7 ай бұрын
I have the 3L in thinking about upgrading to the 6L or maybe even the every day backpack, which may be overkill for me. The 3l suited me for years, but I think I’m out growing it.
@ArsenijeRadenovic3 ай бұрын
Careful with that backpack. It is a mess for keeping your gear safe.
@dreamdisturber3 ай бұрын
@@ArsenijeRadenovic thanks for that info. I hope you didn’t have to learn this the hard way.
@ArsenijeRadenovic3 ай бұрын
@@dreamdisturber You are welcome. I didn't because I did research before buying a backpack and a friend of mine has it. It is simply bad solution for gear. Although it is nice looking, I'd stick to messenger type bags with PD.
@cobymchl7 ай бұрын
loving the tardis in the background
@teguhhardi68857 ай бұрын
Thank you. This is the video what i'm looking for .
@daymonpearcey84688 ай бұрын
Great video and some fantastic images.
@iklink8 ай бұрын
How do we download and or use the assistant?
@iklink8 ай бұрын
Where's the direct link to the assistant please?
@iklink8 ай бұрын
How do we find the assistant app?
@bradwilliams590210 ай бұрын
To be clear, the "clasp" is not actually a locking mechanism. It is an easy-grab finger hold. The buckle operates as any other adjustment buckle does. When its under load, it is designed not to slip. When there is no load, you can move it regardless of where the "clasp" is positioned. Its made to allow you to quickly grab the metal look and pull while on the move to reposition the bag. Folding it over just moves the grab-loop out of the way as opposed to "locking".
@wakeywarrior4 ай бұрын
I didn’t know that and also thought it was a lock, I did find the bag slipping whilst using.
@kimsegal972310 ай бұрын
Hi MixTape. thank you for helpful info on fuji auto iso. you have helped me to figure out a challenging setting. Like that you head out, shoot, come back and critique. :) Great way for all of us to learn. I"m heading to phoenix later this month. staying in scottsdale. would you be able to suggest some places for street photography and other highlights in the area? Keep on shooting.
@colbykoshi11 ай бұрын
i mostly do photography in NYC. If I wear a sling like that and start to pull a camera out I might get shot before its out
@redesignedlife77711 ай бұрын
I had the 3l bag for 3 years now and didnt know about the locking and loosening clasp. It’s always gradually loosening on me when i wear it on my hip. It’s been frustrating and a turn off when i wear it.
@ArsenijeRadenovic3 ай бұрын
stop it with a paper clip
@redesignedlife7773 ай бұрын
@@ArsenijeRadenovic haha....i sold it. Someone else can deal with it now.
@riverbankfisher11 ай бұрын
DJi's failure to adequately publicize that there are TWO versions of the DJI Assistant 2, namely the basic DJI Assistant 2 which is different from the specific DJI Assistant 2 for MAVICS. Further muddying the water is the fact that the Mavic 1 Pro obstacle avoidance and vision sensors CAN be calibrated with the basic DJI Assistant 2, BUT the Mavic 2 Pro will NOT calibrate with the basic DJI Assistant 2, and will ONLY calibrate with the DJI Assistant 2 for Mavics. Not all Mavics are created equal, evidently.
@smoothjamz-is9we8 ай бұрын
DJI SUCKS IM BURNING MY MAVIC AND I WILL NEVER EVER BUY ANOTHER ONE
@riverbankfisher8 ай бұрын
@@smoothjamz-is9we Nobody burns money haha. You might sell it, but you won't burn it. Except for a Fimi X8 quadcopter I bought by mistake, all seven of my drones are older DJI drones compatible with Litchi.
@MSladekPhoto Жыл бұрын
Thanks for sharing these photos and thoughts on the abilities of IBIS in the X-T4. The technology we have to help us create the photos we want with the least amount of friction is so amazing. Looking forward to future videos and subscribed!
@mixtape5143 Жыл бұрын
Thank you very much for your kind comments and sub, I greatly appreciate!! Cheers 🤙
@MSladekPhoto Жыл бұрын
Thanks for sharing this! Long ago (1970's - late 80's) I lived in North Phoenix (32nd and Shea area), so it was fun to see what the area looks like through your camera. Thanks for sharing your thoughts on lessons learned - that's such a positive approach, because there's always something to be learned or improved. Cheers!
@ZMEDICALFARMER Жыл бұрын
I crashed my mavic pro 2 week ago, it still goes up with no errors on screen. But when I try to simply fly right it goes backwards, like I hit a censor out of whack or something. Will this help that ya think?
@dronmdp Жыл бұрын
My dji avata has a sensor error, and imu calibration message, no more info or debug screen :(
@JedediahWhite Жыл бұрын
I can’t get mine to continue using my iPhones hotspot. It initially sets up fine, but disconnects when I get back in the car later.
@georgewashington7374 Жыл бұрын
Going back to Flag in Jun. I’ve been there for the New Years pinecone drop the Hotel Monte Vista is always booked way out…ima try again to book a room.
@PivotPointPatterns Жыл бұрын
Thank you for solving this mystery for me!
@donnalynac2690 Жыл бұрын
i have a 16' loptop do you think does it fit this 21?
@mixtape5143 Жыл бұрын
I unfortunately only have a 14” to test which fits with no problem. Their website says 15” or smaller. From doing a Google query, someone wrote that the 16” can squeeze in but it’s really snug. I would maybe just double check with them directly before committing. I hope it works out well for you if you get it.. cheers - Jade
@hugomartinsphoto Жыл бұрын
This was great! You got some really nice images!
@mixtape5143 Жыл бұрын
Thank you, I greatly appreciate! 😊🤙
@hugomartinsphoto Жыл бұрын
@@mixtape5143 🍻😉🙌
@lwdcourt2 жыл бұрын
I think there's only one way to cut out bright sunlight. I can't be alone in the drone frustration I have. In simple terms I take my drone on holiday/travelling and then want to take on a walk, car journey, etc. to whip out when the opportunity arrives. The basic problems are 1. Deploying the drone is a pain…Every method of carrying a drone means a frustrating set up especially if it's bright sunlight and I need a shade of some kind. Even when I've got get good at unpacking, it can take 10 mins to set up and then 10 minutes to pack away. In most of the places I go I want a quick 5-10 min video and be gone and so the 20 mins set up and pack away is fiddly, difficult (on the floor of a dirty track) and infuriating. 2. Bright sunlight is an absolute pain. There are lots of sunshades but frankly in bright sunlight they're next to useless not least because you need to be able to read the small text on the screen that might be saying something like "SD card full not recording". Add to that they're difficult to carry around without damaging (in the drone backpack), fiddly to set up and easily broken. 3. Screen size is a problem. It's all very well using a small phone to view what the drone is filming but small screens mean even smaller text and again that can be a big problem Sure I can use a tablet but that means lugging more weight, a much bigger more cumbersome sunshade, etc. It's especially a problem for those of us who are long sighted and need glasses to read the close stuff. It means juggling glasses on your head to see the screens and then moving to see the drone at longer range. 4. Transporting for plane travel, etc is difficult. To take a drone on your travels/holidays means using up your onboard carry allowance with a dedicated drone bag. There's no easy alternative to folding down the backpack (I need to carry the drone on a walk/bus, etc) into my carry-on. I can't be alone in these frustrations but despite looking through the forums I haven't seen anyone commenting on them as a whole. I have a solution though... it's taken me hours of trial and error, and I've had to refine skills in cardboard folding, sewing, gluing and design.. but, for me, the result is awesome. I'm absolutely thrilled with the (final) end result and am posting just in case others might benefit. (NB this one is for Mavic Pro but principles apply to all drones and I've just finished a new and much improved version for Mini 3 Pro) I've made the first and only backpack, I know of, that easily, safely and securely carries the drone, controller, etc, is really quick to deploy, is a complete blackout sunshade, incorporates optics (glasses) and folds completely flat to pack in hand or hold luggage. Consists of four parts... 1) Outer shell - ripstop nylon 2) Protective Frame - vinyl covered cardboard (possibly overkill?) 3) Carry Box / Backpack frame - cardboard frame 4) Sunshade - Cardboard box (usable without backpack or inside backpack) It's a bit difficult to explain in simple words and I've posted pictures on some forums. At some point I'll post a youtube video Thoughts / comments?
@rlmarin19682 жыл бұрын
Wouldn’t Live Photo with the “long exposure” conversion give you what you were looking for? The 3 second video of a Live Photo would have let you blur the train.
@Spatial_Computer2 жыл бұрын
What error were you getting. Mine is error -13
@77shawnie2 жыл бұрын
Don't like flying either, but love to travel.
@eprohoda2 жыл бұрын
Yeah-total epic ~see you on my side!dude. =)
@paulb61812 жыл бұрын
hi i just want to let you know that doing the calibration on your screen is what damaged my imu. mine was working totally fine for months and then i just wanted to get video of my sd card and dji said hey why not update the firmware so i thought why not and then it ask me to do al lthe follow the box around the screen . i then went out to get more footage and i flew it on one battery and then i had to change the battery after i changed the battery the imu problem kicked in. so just thought i let you know that this does not actually work it actually made my mavic 2 pro stopped working. im now in the process of going back to my dji inspire and the zenmusse z5 camera. thank you for trying to help you were just one of the lucky ones that got it working by doing this and i was one of the unlucky ones by doing this messed up my drone now the firmware wont update at all in any way and it still says attitude imu data. MY ADVICE TO ALL POTENTIAL CUSTOMERS OF DJI, DONT WASTE YOUR MONEY, BRING BACK THE INSPIRE OR THE PHANTOMS THESE MAVIC DRONES ARE TOTALLY USELESS THEY BECOME DOORSTOPS AFTER A FEW FLIGHTS. does anyone want to buy a drone with imu problems.l
@igorabramov35092 жыл бұрын
Hello, this is such an awesome channel ! I have similar calibration issues on my DJI Mavic Pro 2. There is a constant error and when I am trying to calibrate it won't go further then 3 dots/steps on calibration. It just stuck at somewhat about 95% of the step #3. Tried trick with the level and still the same issue. It is almost new, I flew just a several times and never dropped it. Will appreciate for any additional advises on how to fix this issue? The idea of sending it over to DJI makes me even more anxious. Appreciate so much!
@mixtape51432 жыл бұрын
The only thing I can think may be an issue is the monitor size being used, I would double check that your monitor falls within their guidelines. Otherwise I’m unfortunately not sure but it would be worth initiating a conversation with DJI to see if they may have any other suggestions before having to send it in. I wish you good luck! Cheers - Jade
@igorabramov35092 жыл бұрын
@@mixtape5143 Jade, thanks a lot
@marcustannersr2 жыл бұрын
very helpful
@mixtape51432 жыл бұрын
Thank you for letting me know it was helpful! Cheers - Jade
@benjones89772 жыл бұрын
Some nice shots! Born and raised in Seattle and doing a lot of street photography as I’m retired. 🖖
@AXVIfoo2 жыл бұрын
Nice tan
@enzocipriano43212 жыл бұрын
*I bought this as my second **Newest.Technology** device for my living room. I LOVE having them around my house. Especially with the smart plugs! During Christmas it has been so great to tell Alexa when to turn the Christmas lights on and off.*
@pgol2000142 жыл бұрын
Is the strap still comfortable when it’s squeezed by the Capture Clip?
@mixtape51432 жыл бұрын
The strap is still comfortable where the capture clip is attached. Where I have added padding to make the straps more comfortable, is up at the top where they can potentially rub against your neck.. :) Cheers - Jade
@pgol2000142 жыл бұрын
@@mixtape5143 thank you!
@JT-qe4pm2 жыл бұрын
I'm going try it, I can't find the power supply that you use on on your Eco, so I ordered the power converter from Amazon to plug into my cigarette lighter port. I have AT&T unlimited wifi on my car for only $15.00 a month. I can use the wifi in my car for a variety of gadgets like my laptop etc if needed. I'm sure it's going to work fine, just not sure where I intend to store it in my Ford Fusion. I guess in my center console if it can hear my commands, which I assume it will.
@edmacdronemanutec98862 жыл бұрын
I've tried to calibrate but the rear sensors are not working, the error number is 200000c0 apears in the screen and I don't know what's mean.
@aidanalvarez17222 жыл бұрын
Dude called me out in the first 5s of the video. Loved it!