Wow that's crazy! I don't think anyone else was thinking that. Kinda like the title says huh?
@Delsoulo3 жыл бұрын
So wait is it just the uel and the rest of the exhaust is stock ??
@Jack-gl1tw2 жыл бұрын
No way it’s too loud
@dgssantos3 жыл бұрын
😳
@rainbowrailroadcrossing77983 жыл бұрын
Can’t explain the beauty
@jeremylyons77123 жыл бұрын
Haha i since a little sarcasm in that!! 😉😊
@TRichard304 жыл бұрын
That must make for a long day.
@jeremylyons77124 жыл бұрын
TRichard30 it sure is.
@myhemi3924 жыл бұрын
Ya still got it Jeremy! Smooth!
@kingromfishing54654 жыл бұрын
I miss going do that
@dgssantos4 жыл бұрын
Muito loco
@DireReplay4 жыл бұрын
How much hp did this setup give you?
@jeremylyons77124 жыл бұрын
BornWithFame the dyno numbers were 307hp and 352 torque at the wheels.
@DireReplay4 жыл бұрын
Jeremy Lyons what was your setup for that hp? Besides the mods turboback and headers
@DireReplay5 жыл бұрын
How much louder do the headers make it?
@jeremylyons77125 жыл бұрын
BornWithFame not a whole lot louder.
@DireReplay5 жыл бұрын
Jeremy Lyons did it sound deeper after the headers? Also do you think the headers made it sound better
@user-zu2bw7ig5v5 жыл бұрын
Small wood.
@marcmaillet48585 жыл бұрын
MAN I miss running bunchers
@perdean5 жыл бұрын
Nice video, very smooth on the controls, I like the wintertime vid, makes for nice background, easier to find a lost drone too ! lol
@jeremylyons77125 жыл бұрын
That was shot with a Yuneec typhoon and GoPro gimble.
@jondoh59616 жыл бұрын
holy scrappy wood... very good operators.. those tigercats sure have efficient hydraulics..
@derekdeanda75496 жыл бұрын
Do you have a link for this header?
@jeremylyons77126 жыл бұрын
No Deezyboy 01 it was custom made.
@Fundy5066 жыл бұрын
Those Hornet/Target heads used to be everywhere. Now not so much.
@jeremylyons77126 жыл бұрын
Scott Stubbs yeah they seem to be few and far between. These one are in amazing condition and work very well.
@haydenwatsonvlogs21426 жыл бұрын
I love can-ams
@jeremylyons77126 жыл бұрын
Thanks!! 😉
@haydenwatsonvlogs21426 жыл бұрын
Cool machine
@jeremylyons77126 жыл бұрын
That’s what i teach people to operate.
@haydenwatsonvlogs21426 жыл бұрын
Cool
@haydenwatsonvlogs21426 жыл бұрын
Nice video and can-am
@jeremylyons77126 жыл бұрын
👍🏻👍🏻
@haydenwatsonvlogs21426 жыл бұрын
And subscribe
@MrBruzTube6 жыл бұрын
where did you get those headers
@jeremylyons77126 жыл бұрын
+Brady made them from scratch.
@reebokgoalie2566 жыл бұрын
awsome!
@zyndapp8006 жыл бұрын
You should use Balmec spiked feed rollers on it. It makes the head to perform way better than the profiled feed wheels. This would be very useful when felling hardwood. I also know they have the double mounting version for this head, that is mutch more competitive than the standard with. LM doesn't have anything like this :)
@jeremylyons77126 жыл бұрын
+zyndapp800 thank you for the feedback i will pass it in to the contractor that owns the machine.
@robertrichard30687 жыл бұрын
this is me cutting . tks J.
@fifamonstar56647 жыл бұрын
What exhaust are you running? Or is it custom.
@jeremylyons77127 жыл бұрын
+FIFAMonstar its an EBay exhaust nothing special at all.
@jeremylyons77127 жыл бұрын
FIFAMonstar it was just a cheap eBay exhaust my stepson had bought for the car.
@smartfeller14957 жыл бұрын
Jeremy Lyons hey i just built some custom uel headers for my honda check it out on my channel
@nayebany2 жыл бұрын
@@smartfeller1495 hey little bit late but can you build ones for tu5jp4 engine?
@markoromero350 Жыл бұрын
@@nayebany can he? Im interested 👀
@reebokgoalie2567 жыл бұрын
nice flying
@jeremylyons77127 жыл бұрын
Thx!! 😉
@reebokgoalie2567 жыл бұрын
nice vid
@reebokgoalie2567 жыл бұрын
nice vid
@reebokgoalie2567 жыл бұрын
wicked
@jeremylyons77127 жыл бұрын
+kaylem shute thx man!! 😉
@mooner677 жыл бұрын
Have you guys been having any issues with those 931's? Over here in the mid US we've been having DEF system problems and bar oiler problems.
@jeremylyons77127 жыл бұрын
mooner67 no issues as of yet but they are removing them after the warranty is up just for cost savings.
@Guimatics7 жыл бұрын
What did you end up doing with that custom UEL header you had on the tib?
@jeremylyons77127 жыл бұрын
they went with the car when it was sold.
@Guimatics7 жыл бұрын
Jeremy Lyons Damn alright
@jeremylyons77127 жыл бұрын
No it was built and installed at SMS in Fredericton New Brunswick.
@mooner677 жыл бұрын
Is that a factory grill guard?
@jeremylyons77128 жыл бұрын
Yeah the car was ready for the junk yard we didn't really care what happened to it.
@kizunaaiartificialintellig51552 жыл бұрын
junkyard? what are you saying in Mexico you can still sell it at 5k dlls
@detaart8 жыл бұрын
That motor is hurting. Bad tick in the block and lots of blue smoke on takeoff. Anyway, i did this myself for my vx220.
@jeremylyons77127 жыл бұрын
Yeah the old car was ready for the junk yard.
@smartfeller14957 жыл бұрын
detaart sure you did but no video? ok.
@robertbrooker7066 жыл бұрын
It's just the valve shims need replaced but the motor is fine almost all beta engines do that after about 70, 000 miles it's no big deal it will run forever like that
@robertbrooker7065 жыл бұрын
I got the same motor in my Kia Spectra it also needs a valve shims but runs like a champ even with the 125 shot of spray on it
@eugenenalpin60583 ай бұрын
Oh. I should get my Tib checked...
@jeremylyons77128 жыл бұрын
No its a custom unequal length header like you would find on a WRX
@ArdvarkCleavage227 жыл бұрын
Jeremy Lyons where did you get it done??
@jeremylyons77127 жыл бұрын
i did it myself
@smartfeller14957 жыл бұрын
Jeremy Lyons how?? i need to see which pipes you lenghned.
@jeremylyons77127 жыл бұрын
Smart Feller 2-4 long 1-3 short.
@smartfeller14957 жыл бұрын
Jeremy Lyons and I assume you just used a 180 degree u bend and a 90 degree 1.5 inch piping and cut those pipes to put a loop in the pipe for 2 and 4 to make them longer and had it all welded?
@antonnysaussay67929 жыл бұрын
nice sound ! header Megan racing 4-1 ??
@jeremylyons77127 жыл бұрын
no it a home made job 4-1 with tubes 2-4 long and 1-3 short