when checking levels, should the tractor be running, cold , warm??

Ive an SSV65 and love it

So if the circle for hydronic oil is going to be full to the top?

Yeah I believe that

Hp and oil flow?...

😂

This video MUST be removed from youtube and the dudes MUST be punished for wasting people's time.

Kubota KX 060-5 there’s No way to change the Control panel

Im having a problem on a zd1511 zero turn regen. It's stuck in the park regen mode and I've allowed the computer to do its regen mode but it still won't clear. Even afyer blocking radiator to allow to get hotter it still won't come out of regen mode. What csn i do? Does it need to go back to kubota for laptop analysis?

Jefe muchas gracias, por el dato 👌👌

👀

Thanks for the video

I forgot to mention a few more things. You had better be very careful dumping any load that is not on a completely flat surface. I had the machine for about one hour and a friend of mine was testing it out moving some dirt on my property, he rolled it over to about 45 degrees. The only reason it didn’t go completely over was the bucket caught the dirt pile and stopped it. I pulled it back over with my tractor. There is something very strange in the movement in the front axil due to the rotating connecting pivot in the front end. I was on somewhat sloped ground moving brush very carefully and low to the ground and still managed to pick up one front wheel off the ground 4 times. The pivot should have been designed with a torsion type of resistance to help resist the rolling movement of the front in relation to the back end. I am probably going to load the front tires to help keep them on the ground. Another issue is with the mechanism used to lift the loader bucket. I found that if you try to back drag the bucket it actually flexes and will not hold firm. I looked it over and could not figure out how it is able to do this other than having so many linkages that each one of them contribute to the flex. It does come in handy if you roll the bucket completely forward and forward drag the bucket to level ground. It doesn’t jam the bucket due to the flex. Over time this may hurt the linkages due to the leverage on them. The wheel base is very narrow with no capability to move them out. With the onset of emissions control, it is necessary for the engines to run hard at high throttle to clear the particulates from the system. On this machine, the only time it is at high throttle is in low gear. In high gear you can’t throttle it or you will loose control. In the end this is not good for the life of the emissions system to work properly. In conclusion I would have to say it is a very nice machine if you want to stay warm with great views while deer hunting. If you want to use it for what it was designed for you better stay on flat smooth ground so you don’t kill yourself or destroy the machine. This is the result of some very good concepts that were not tested in real life. Get with the program Kubota!

You forgot the biggest downside of the new unit, it only has a high low transmission. I use mine around the farm. The low is for picking up piles and is too slow trying to move any distance. The high is uncontrollable on just about any surface except flat like a road. I have tried to keep most of my foot off the pedal so I can control it better. It doesn’t work. I am considering putting in a throttle knob to control it better or just getting rid of the machine all together . What idiot engineer decided to get rid of the 5 speed transmission. I can say that being I am a engineer myself. Sometimes I think they don’t bother even testing there design out before dumping it on a bunch of suckers like myself.

Thank you on the U17

Should show where to add.

Nice how much?

Hey, we have a kubota u27-4. We're having this exacte pressure problem on the auxiliary system n°1. We can pop in the right one without problem, but not the left one. Any advice on how to release that pressure? We tried the same method but didn't work. Since it's a slightly different machine, maybe it's a different way.

Which would be best for a rental fleet?

Would the k008 be able to lift a 200 lb log?

Thank you bro 😎 this video really helped me ✌️👍God bless you 😊

This video does not say how hot to run the machine or for how long. If you have smoke billowing out of the machine, and the smoke goes from black to white after a time, congrats, you've just run all of your oil out of the machine and need a new motor. The machine should automatically start the regen process. It should regen for a certain time around 20 minutes and get your machine hot to a certain temperature according to your owners manual which you should read thoroughly. Do not hit the switch to delay the regen. Just let it do its thing.... and read the operation manual thoroughly!

No i dont want a simple turn of the wrench, I want a simple push of the button from the cab so i can switch back n forth as much and as often as I like. Why is this such a foreign concept? Cant this be done with the same type of electronic diverter valve that many other machines (especially tractors for loader/grapple ops)?

I don't know if it is good or not, but in your thumb nail, you look like Al Gore.

Any chance to add that to a existing machine?

I’ll give you a track nightmare story. I rented a John Deere 333G with 60 hours on it. They sent the machine with a tooth bucket that was 20” narrower than the tracks. It is supposed to have an 84” or wider bucket and not a 64” bucket. I was digging a trench and as I got deeper I heard the tracks grinding and sounding like they were coming off. Eventually one did and it wedged so hard toward the machine that it shredded 3” off the inside of the track. Mechanic came out and after 2 hours we got it back on and he left. And hour later the other side came off and also shredded but I figured out the problem. When the bucket is too narrow and you’re digging, it creates a slope because the tracks are half on high ground and half hanging over where the bucket dug. This forces the tracks to camber inward and when carrying a load, it shreds the tracks. This is also a bad design as they could put rollers between the track and the side to prevent the track from coming off and shredding.

Fundamental failing in this video was to state the correct position of the machines arms, boom, dipper and bucket to the check position!

Thank you

Is there an optimal thumb?

On hydraulic level should all your cylinders be in before you check the level on the machine? Just wondering?

Skid loaders... change the pattern from ISO to H pattern. I have a 2018 SSV75. ISO sucks for what I do.

Secure lever down, make contact with ignite key, press middle knob once on the control screen and then press all knobs randomly on both joysticks left and right

Price?

What is the part number or size for the quick connect you are using on the second port of diverter? Thanks

Will one of these fit in a 40’ high cube shipping container ?

Lifesaver, thanks for your post

Small cab

How would you puncture a fuel tank?

I am looking for a hydraulic breaker for a Kubota bh92 backhoe.

Where is the correct spot to mount a small toolbox on the R640 to carry chains in?

The best video I've seen with the best explanation. Great job. Blessings.

Kubota rep says to be absolutely certain to filter fuel before filling tank, so have a filter system, or at least I use a fairly inadequate fine mesh screen in my case but I do rinse out the jugs first, and do have a new filter on my 150 g transfer tank. Injectors require totally clean fuel in these, they are Japanese precision engineered...

Hey! I have a slight issue with my bobcat, my auxiliary hydraulics engagement for my excavator doesn’t seem to be functioning after i cleaned my excavator with water in the cockpit and all the electrical components by accident, any tips to fix it?

How will the R640 handle a hydraulic powered brush hog with skid steer attachment? The one I'm considering requires 15 GPM of flow. The R640 is rated for 17.8GPM but I'm guessing that's with the engine revving up? Would the use of the inching pedal allow me to use this attachment to get the engine RPM's up without having the machine move forward to quickly?

KUBOTA KX161-3 ON JAPANESE SETTING HOW TO CHANGE TO UK-USA

Does this work on John deer 35g

Sometimes it still doesn't work especially first thing in the morning on a cold day when the oil is like treacle. Then you have to crack off the knuckles and release the pressure that way

Bos how you can turn your excavter around and name given to dat part

Hi, can you tell me what a Hydraulic Pressure Relief Pull is? Is there an item that is actually called a "Pull" or is the thing actually called a "puller", and what does it look like? Really grateful for any answer😊

All that bs to get to that. Talk about holding me up on a job. Just get to it already