2:59 “Zeus!!…Apollo!!”

Why do they continue to make them so difficult to remove?

It's a Hawaiian fish pond in front of the house

I loved that show its disappointing that no one restored the building to how it was so many great tv shows in the 80s music film what happened today

Excellent ! What a great piece to watch. So many fun and happy memories watching the show and this vid. I have the complete set and it NEVER gets old. Happy you enjoyed making it and you have it forever as a treasure. Many more days of health, happiness, and of course MAGNUM P I !

Nice! Great tip! What is the eventual dimension that you get the file down to? Ie what size do I make it? Thanks!

I usually spray it with some carb cleaner,then take some .30 welding wire and move the ball around till the debris breaks up.

"Oh my God..."

I lived Honolulu for 19 years and have been to all the islands except for the 2 that are off limits.....I should have stopped there back in the day and swam there.....no longer gonna dry dat with da man living there now.....I did go to Waimanalo Beach dozens of times at the AFB there.....I am moving back in 24 to die there and I mean it in a good way....my HOME...

I Use A Crescent Wrench With My File

Where's the big square stone?

I made my own removal tool with a tire iron. (One with a flat hubcap tool end) Only minimal grinding to shape it so it fits snugly, (that is VERY important), and the bent end that is normally for removing the lugnut provides a good handle to twist. The slot gap in the check valve is quite wide, and if you try using a screwdriver, they don't match and you will just end up damaging or breaking the checkvalve cap.

Man i enjoy your pictures very much it's one of my dreams to go there and visit the place thanks for sharing 👍

Truly one of a kind..bellisario would be impressed...😮..

Magnums age seems abit of a mystery..different contrary ages are given during the series...

Badly overgrown...unfortunate..

Zeus Apollo

I got that same set of skis in my garage, and it looks like the same bindings too. I don't know if they ever laid down tracks in Santa Fe, but I'm pretty sure they knew Taos real well.

This is like performing brain surgery with a sawzall. C'mon man! The proper tools go for around 30 bucks and will be at your door in 2 days along with the new check valve you should probably order. If you only have one to fix, sell the damn thing on eee bay for 29 bucks as "only used once". At least wrap some cloth or paper towel around the damn file to keep from scarring up the pump tube. My best recommendation is to not store your lantern in the rain for the better part of a decade. Many, many Coleman appliances have been permanently destroyed during check valve removal attempts. The proper tool leaves no chowder marks and the check valve will be factory perfect on the brass when you remove it. It's your lantern/stove. Use your best judgement before proceeding.

Still works ??

You got Magnums manerisism down pat!!!

I tried this with an unmolested file and quit after using a fair amount of force. I did not want to break the file or screw up the CV. What finally worked was a day and a half of white vinegar. I had previously tried MEK and IPA. In a bad case I don't think it would be crazy to fill the tank with vinegar up to the level of the CV. Well worth buying a set of gunsmithing screw drivers to fit critical screws well...just as an aside.

kzbin.info/www/bejne/oF6zh42mhbx4is0

Love the Hawaii 50 theme..

The fact that Roger E Mosley and Larry Manetti signed the nose, makes this 500D absolutely priceless. I’d never let anyone fly this but myself, if I were the owner!!!

Love it, the dreams were cast by that beach house and that clubhouse, still with me today.

Business man Martin Nesbitt purchased it for the Obama's. Asking price was $20 million but got it for $8.2 million. The home structure was to unsafe to save, the sea salt destroyed everything because it wasn't cared for because the previous owner passed away. A lot of beautiful memories ❤️

These were great boats with a fantastic handling and performing hull. So good that another boat company Stryker copied the design or maybe purchased the molds from Hammond (not sure). Strykers were likely lighter and I don't believe the quality was nearly as good. With a carb'd 454 Mercruiser they would run in the low 70's if I remember correctly, straight from the factory.

Mais pourquoi démolie? C’est incroyable! Quel déception 😞 on démolie toujours tout dans se monde, je ne sais pas grand chose sur cette villa mais j’avais lu qq part que cette villa a l’époque appartenait à une dame, à l’époque du tournage de la série, je suis tellement déçu de s’avoir qu’elle n’existe plus. Si quelqu’un peux m’en apprendre plus sur la démolition de la villa merci d’avance, je reste persuader qu’il y aurait eut une solution pour la faire revivre, mais ici bas tout est question d’argent et de destruction 😢je crois que de tout les fans de la série je suis la plus attristé, quel gâchis franchement

J'y suis allé en mai 2022 et j'y retournerais dans ce rêve Hawaii 5/0 magnum pi Il aurait fallu prendre la plaque interdit d'entrer 🐕 chiens 🐕 de garde en plus c'était celle de la série une pièce de collection 🎬🌴🇫🇷🇺🇲

Just need the Magnum and TC giggle! I went on hour Kauai your, right front seat. A girl in the center grabbed my thigh when we shot over cliff. I giggled.🚁

A few tweaks on this version would make it safer and easier on your back. I built one for my recent roof replacement. I took apart my extension ladder and used those for the uprights. I just used u bolts around the ladder rungs to clamp 2 each 2x4's to the back of the ladder for cross braces, one has to be at the top for pully installation. Luckily my ladders end 3' above the roof edge (no bending needed for loading or off loading). I could easily do 2 bundles at a time. I drilled a hole in the sled side rails so I could insert a 12" barn spike into the hollow rung of the ladder.. I tied the spike to the ladder with some twine so it would always be hanging right where I needed it. My sleds were about 3' tall and the shelf was about 10" from the top. I attached the cable below the midpoint of the sled so 1/2 the sled could go above the pully bringing the shingles to the top of the ladder. I was able to off load from the roof side since they were at the top of the ladder and waist high. . I'm 63 years old and not in the greatest shape, I did 94 bundles in 3.5 hours staging them all on the ridge.

Maiexista

Great tip! I’m in the process of getting one of my dad’s lanterns working again. It’s a 1963 year model. This helps greatly.

first music in a vid I dig

😀👍🌹

NOT like that anymore since BO and NESBITTS have bought the land and are having a compound built there.

David is a cool cat for sure!!!

Should use a crescent wrench. But man that’s a great idea with the file

Masterful, well done !! Memories are forever, and this one is a gem.

Thank you. Was trying to do this with a regular screwdriver 🪛 .. didnt work.

Thomas Magnum would be pround of your teasing. Even Higgins would not recognize you. The fake mustache was well glued And water proof. You had Lucky. Zeus And Apollo did not catch you. They were protecting Robin's Ferrari.

In 1979, I moved to Switzerland and took my Coleman Lamp along. Reasently I found it in my Garage and it did not work. Next to cleaning all parts and restoring the Generator, I removed the Check Valve easily with a "SCREWDRIVER NR. 6, EUROPEAN SIZE"

I got a nice opportunity to meet Tom Selleck and John Hillerman in the winter of 1982 on the property that's next door to the left side of the Magnum PI driveway entrance where the big gate was. They were in that next door property filming "Foiled Again" where John Hillerman and Tom Selleck we're filming. I got to see TC's Volkswagen bus, the Ferrari some of the guest stars. Tom was pretty quiet, and John Hillerman was really a very sweet man, comes from Texas and has no English accent. We got to know one of the body guards and he gave us Magnum PI baseball caps and we had them autographed. Is such great memories

@Tsheppar78: how far apart are the guides in the back of the lift platform? Are the snug? And do you use rollers or something to make them go up so smooth?

Does the car still exist in 2022?

Awesome! Glad you had that experience! I would love to go there one day!

Still have the old girl? Can we get a a video with engine sound. Miss the sound of those old girls.

Could have had the roof done in the time you guys fucked around with that

Well this video got me inspired to get my 81 mk2 challenger going after sitting up for 8 years thanks