Thanks! We learn from our 'failures'! Thanks for uploading!
@praveenkandru20845 ай бұрын
I dont have option to save settings, i can only set to -5mm every time i print how to resolve?
@warrenbenson26385 ай бұрын
You should have the option under "control". You do this before you beginning a print.
@praveenkandru20843 ай бұрын
I resolved it by resetting, I don't know how.
@mojoTx5 ай бұрын
Mines doesn’t have a z offsets
@warrenbenson26385 ай бұрын
What does it have?
@mojoTx5 ай бұрын
@@warrenbenson2638 I fixed it my dumb ass didn’t connect it 😒😒. Thank you tho
@rykeryoung924210 ай бұрын
can you teach me how to do sit ups mr.benson
@rykeryoung924211 ай бұрын
yeah my boi this is good content
@warrenbenson263810 ай бұрын
You're funny.😂
@metalheadmalta11 ай бұрын
Absolutely perfect!!! Had so many problems, but this fixed it.
@warrenbenson263811 ай бұрын
I'm glad it helped.
@metalheadmalta11 ай бұрын
@@warrenbenson2638, I had given up on ever getting something done.... all i was printing was wool!!!! This solution should be faaar more popular... I suggest a title change. Honestly, this is amazing.
@sallymjmj75011 ай бұрын
This is great. Could you turn up the audio at the beginning? I can’t hear your voice at all until halfway. Thanks!
@warrenbenson263811 ай бұрын
I don't say anything at the beginning.
@stevenowens4511 Жыл бұрын
For anyone finding this: The spot he's pressing is where the asterisk (*) key is. To see it, go into fax mode and it will light up the number pad there. Make a mark to be sure where the asterisk key is. That said, I tried this and it didn't work. There are lots of websites that say to press the asterisk key, but it doesn't cause any reset menu to appear. Other than the asterisk key, thank you, this is exactly the same model I have and I was wondering if I was doing something wrong because I'm not getting the reset menu when I hold down the asterisk key. Maybe Brother updated the firmware to prevent this from working?
@carmencarmen9489 Жыл бұрын
Omg thanks found it :)
@MagneticCommand Жыл бұрын
Thank you, I couldn't figure out how to hold the * button while the lid was open. You're fantastic.
@user-rs9tz6vv4n Жыл бұрын
Ah, it doesn't work. Good to know. I'll go buy the HF tire like you did. Thanks for posting up the video.
@warrenbenson2638 Жыл бұрын
If you are going to be moving full barrows of dirt, get a solid rubber tire. The foam one I got from HF lasted until I moved it full of dirt, then it collapsed. It says on the tire that it is rated for 350 pounds or something like that.
@alexanderramos5988 Жыл бұрын
thanks so much help me a lot and save me money.
@warrenbenson2638 Жыл бұрын
No problem. Just sharing what I found.
@t_dogg8097 Жыл бұрын
You rock!!
@Verro2 Жыл бұрын
Perfect instructions. Easy to follow. Thanks alot for the help. I prolong my cartridges until they start to show signs of less ink. Lots of money savings. And I can also refill my cartridges and reduce waste of cartridges
@warrenbenson2638 Жыл бұрын
Where do you get the supplies to refill your cartridges? I've wanted to do that but it has been a struggle to find toner.
@dennisb6690 Жыл бұрын
very helpful. thank you for sharing.
@kingssubject6911 Жыл бұрын
Thanx bro just saved me some doe
@qwazy012 жыл бұрын
👍🙂 Worked like a charm - ty very much 📍 NOTE: @0:30 THERE' S AN INVISIBLE "*" (ASTERISK) BUTTON THAT MUST BE PRESSED AND HELD FOR THE TONER MENU SCREEN TO APPEAR
@prschaming2 жыл бұрын
Good demo. NOTE: At 30 sec. mark it's not clear that you are actually pressing the 'invisible' * button on the touch screen. Worked great.
@Caroline-jd8ut2 жыл бұрын
Very helpful simple fix for a problem that I thought was going to be the end of my now rather elderly printer.
@crochetmilie2 жыл бұрын
Thank you so much!!!
@gravytrainwithbiscuitwheels2 жыл бұрын
This video saved me. The only thing I have to add is to make it very clear you need to press to the right of the red "x" for a few seconds. First time I watched this, that wasn't so obvious. Then again, I'm fairly dense. TY
@donschmidt33982 жыл бұрын
how did you get to the Reset menu?
@warrenbenson26382 жыл бұрын
With the cover open, you have to hold your finger next to the red "x" until it responds.
@muathsunaidi67172 жыл бұрын
thank you Warren. this actually worked for me. bless you and your family.
@warrenbenson26382 жыл бұрын
Great to hear!
@yasmineya21732 жыл бұрын
I just want to say thank you so much! your video saved me!!!! the brother website failed to do what you just did. Thanks a thousand times.
@warrenbenson26382 жыл бұрын
Glad I could help!
@adammacd0nald2 жыл бұрын
This printer is the GOAT
@troystarr93902 жыл бұрын
Seemed to work on our HL-3180CDW as well. Thanks
@rexeffect71222 жыл бұрын
I bought this printer 7 years ago, and it is in excellent condition, I paid $350 , now the price has doubled , but still for that price it’s still a good deal.
@sebastiennault54632 жыл бұрын
Thanks dude! Huge help!
@warrenbenson26382 жыл бұрын
Glad to hear it!
@gmllefutur3 жыл бұрын
Thank you!
@warrenbenson26382 жыл бұрын
You're welcome!
@rogerxiu56673 жыл бұрын
Its great! Thank you!
@warrenbenson26382 жыл бұрын
No problem
@marcelpijper38273 жыл бұрын
Also, the 5 people that disliked this video work for HP or Brother! hahaha
@marcelpijper38273 жыл бұрын
How many cartridges did I return to the store with a ton of ink left in it? I'm so mad right now but also happy at the same time because I found this video! Thanks a ton(er)
It worked! Thanks. For the life of me why wouldn’t they just have it much simpler! I have to open up the printer and press a non existent button? Smh
@yokosuka3653 жыл бұрын
Thank you, worked great for me.
@treenauyesugi43223 жыл бұрын
THANK YOU! I was at wits' end! May your days be filled with sunshine!
@warrenbenson26382 жыл бұрын
Glad I could help!
@abdulkareebaka35013 жыл бұрын
DCP-L3551CDW reset Waste toner T-223CL ?
@warrenbenson77193 жыл бұрын
I really don't know, sorry. You could try finding the manual at the site shown in the video.
@BERTO9293 жыл бұрын
Just tried this, it worked Thanks
@warrenbenson26383 жыл бұрын
You are welcome.
@debbiejohnson59243 жыл бұрын
I was all set to buy a new unit because my Cyan cartridge, though brand new, kept reading as empty. I found your video, followed the very simple steps that Brother didn't offer anywhere, and my unit is back to good. Thanks!
@warrenbenson77193 жыл бұрын
You are welcome. I just did a bunch of research. I figured I would streamline the process for some people. I'm glad it worked for you.
@warrenbenson26382 жыл бұрын
Glad I could help!
@talmid3 жыл бұрын
Also works on our DCP-9020CDW
@warrenbenson77193 жыл бұрын
I'm glad it worked.
@DandSCreations4 жыл бұрын
Why is the blade on backward?
@KingDiablo51776 жыл бұрын
Hey Mr. Benson it's Doug, do I need to learn this for what we will be doing in class next week?