Anyone know where to get the tailgate plate? I bought a used rockbrawler and didn’t get the tailgate plate. I have had no luck getting anyone from poison spyder to respond. Thank you

Are these still being sold anywhere?

DONT BUY THIS PRODUCT I regret buying this POS and here’s why. First off… The tubing bends are way out of spec. After installation of the hinged side the locking side was about two inches too far inward. I had to get my hi-lift jack and cutting torch out and heat up the bends then use the jack to spread the carrier ends apart so that the locking plate can be mounted. Next, the directions SUCK!!! You may as well just burn them. It says that mounting plate should be even with the edge of the top bend of the body. Well… I did that and I had to elongate all four holes in the tub so that mounting plate fits perfectly with the hardware and brackets that goes on the inside. Next, once i got everything installed as high as it would go, I put the tire on the carrier and it wouldn’t line up correctly. I still need to lift up on it to be able to close it… I can’t express enough how much I hate this thing… Oh, and it also rattles like crazy

This showed nothing brah 👎

Ok, wow doesn't show the side he is working on done! Yea, I call that a FAIL

I have the same bumper where do I get the lights

Spare tire on back can snag wall and damage tailgate

WHEN! .....when will this be available for the JLU?

Best instruction Jeep Fender Flare video I have ever watched....way to go. Just bought a new 2022 Willys Diesel 4 door...looing to change it up. Just did a JKS 3-1/2:" lift (real diesel lift) and 35s on 24s. Thank you.

I've had this carrier for a couple of years and I love it. Just recently mine started rattling & for the life of me I cant find where it's rattling from. The carrier has been adjusted and is properly aligned

Is this line feasible with smaller tires ~33" or do you need to have the extra height of 37s?

PS, I got one of these for fathers day and I can't wait to get it installed. Question. Is there a problem powder coating this? Of course I will install first in it's bare metal form.

😂

Nice!

Why is it that you guys never list the riv-nut thread size. What if I want to buy the tool before the fenders show up and I have to test for thread pitch!

but does it rattle? i heard most of the bumper mounts begin to rattle sooner or later.

I saw these online and pulled up this video thanks for putting this out there I was looking into the reverse light for my gladiator thinking of putting it actually into my bumper so on the wires coming off ground and hot I should be able to just tap the hot to my reverse lights and ground is that correct?

How do I remove a bolt from the panel that just spins in it’s nutsert? It is still counter sunk.

How do you remove a bolt from a spinning nutsert?

Done this trail twice. I have not had the courage to do the ledge both times but after this vid ( and a lot of experience since) I will do the ledge next time I'm on it. Vid is very inciteful as all of the Crawl the Line vids are. good stuff. Keep 'em coming.

Is there a way to purchase newer style cage mods to fit the older style cage on the TJ's?

Mine didn't come with any laser etched parts or drill marks. My B-Pillar tubes are about a 1/2" too long, and my upper windshield spreader tube is 1" too short. I'm still in the process of fitting it together, I will update if any other tubes don't fit

What is the factory fill point for the front and rear diff on a 2017 Jeep JKU sport?

Great break down

Need two things! One - JL version. Two - Ability to use AMP power steps WITH this slider installed! Please advise thanks!

What speakers do you have that fit with the roll cage for TJ

Man I love the Fab Four slant back but that puppy is 3k out the door and then u need a slant top. This maybe the best looking option I see for a 40 inch tire

Do they make these for the JL?

I like the unobstructed view out between the A pillars (wind shield), but isn’t it a rule you gotta have bracing there?

@PoisonSpyderTV can this work with the JK Smittybilt GEN1 XRC armor corner guard fender kit?

My state legally requires 3rd brake light and a license plate light, do you guys make kits that go with this carrier to relocate these things?

What size is the green Jeep running?

in case want back how to fix the corner which trimmed already , also can you post the type of light where can be found

Where is the windshield cage tubing? Is that even legal?

Haven't seen a video of this obstacle yet where someone doesn't bang the rear bumper at the very least.

The spider needs to be revamped it looks so 1993 like one of those crappy tribal tattoos nice stuff but the spider needs a facelift

Does it come in black?

the stencil of your logo kills it. Obnoxious. Great product but cut that out.

Wait until you get a chip or catch a rock, goes right down to bare metal and not a simple touch up process. The powder coat on my JCR Offroad products held up significantly better and were super each to touch up after the trail. Been trying for days with PS customer service to get some help around this, leaving a lot to be desired!

When will PS Produce the Welded in Cage for the Jeep TJ? I Ordered one 4 FKIN MONTHS AGO from 4WParts!!!!!! Poison Spyder REFUSES to answer EMails, Phonecalls or respond to Messages! What happened to Poison Spyder?!?! Not a good way to keep customers! Try to at leas respond with an answer! Are you making cages anymore, When or just refund my money back! PS has become another sellout company who has forgotten about the customer!

dang, wish I could rebuild my Jeep with Poison Spyder carrier, bumpers, etc.

those are some serious built JK fender flares. Looks well engineered.

Those look so good with leaving the slider center section raw unpainted.

We've also

Do u need to use loctite on diff cover bolts

It seems like these videos were really good. What happened? Would be awesome if it started back up for the JL/JT, other than did some videos for the JK parts that haven’t been covered in a segment.

You stated it works with any fenders that are on the market, but just to be clear will these work with the XRC Smittybilt /armor/fenders?

Why wouldn't you either powder coat or paint all the raw metal parts?

Love my Rocker Knockers! Just waiting on the step kit for when I’m not on the trail.

Do you have any for the Jeep JK