Perfect 👌

Wouldn’t be a bad AP if it had a 10G uplink port. I’m still rocking the AmpliFi Alien router the best just wish they would update it with 10G ports and WiFi7. I’d buy it no matter the cost.

really useful video thank a lot.

Good information... FYI, PTZ = pan-tilt-zoom

Excellent information!

Good information. The speaking is, at times, difficult to follow since the presenter tends to talk in a low voice combined with quick pronunciation of syllables. Better articulation and slowing down would be help. Some slides need further explanation since the speaker seems to assume the audience understands everything on the slide (for example, the slide showing interference, throughput, and resilience is unclear; I think the presenter intends to say interference decreases with narrower channels, throughput increases with wider channels, and resilience increases with narrower channels, but this needs to be explained since it is ambiguous and not apparent without mulling over it).

Great video! Using Site Magic, I can not seem to map a share from one site to another. Are there any firewall rules I need to setup?

I keep wondering whether a dedicated management network makes sense or not. You also seem to be more in the camp of those who also use the default network as a management network.

*Error on LAG Group Descriptions - LAG groups do not double throughput - it simply provides multiple paths, each at their max respective throughput. 2x 10Gbps ports in LAG will not yield 20Gbps - it will yield 2x 10Gbps.

Could you do a similar webinar based on the UISP product line?

outstanding. Thank you.

Thanks for the video team. Insightful so far

I gotta say Ubiquiti you have come such a long way, even your firmware updates are rock solid. I can remember the days Ubiquiti would push out a firmware update and bang it would screw something else up, friggin pain in the ass back in those days....you would prayer whilst updating... Ubiquiti is a great product which I highly recommend 👍👍👍👍

Awesome Webinar.

Ubiquiti has come such a long way. Well done Ubiquiti 👍👍👍👍

👍

Excellent video! Thanks for posting it. But it brings up a couple of questions: (1) So what's the use case (i.e., pros/cons) for a UXG + UCKG2(+) versus an integrated UCG? (2) Not much conversation these days around Unifi Hosting. Is this a dead-end tool, now that Site Manager is available?

Hello! Is there anyway i can get a hold of the powerpoint you are showing in this video?

When will we get facial recognition on the G4 Doorbell Pro camera?

Why display multiple camera color options if only one is available for purchase?

Make it a simple video

Thanks Alex this was a great explanation of good security practice in 3CX

Hello, could you please provide us with pdf course?

I dont think you can push changes to multiple sites, you still have to go into each one

Thanks for posting - looking forward to it reaching the UK

Great video! Can the starter kit handle 2 locks on the same door, one for day time usege and one more secure that locks during the night?

why is it risky to use a prefix 0 - 9 in an outbound rule?

Hi Adelaide, Thanks for sharing useful video, tell me router phone required Public IP or NATTED IP to talk with 3cx cloud or local IP with internet will work also.

I noticed that in the newerk application is a toggle to isolate an network and this does the same except for the gateway intself , downside is that you can not review the builtin firewall rules or the rules that are made by selecting options like the one i mentioned, is there a way via CLI to see the builtin rules , just for viewing or learnig purposes

the cable root schould be a star somewhere is the switch and form eveery AP you hace to run a cable to the point where the switch is

default the power is auto , i have read that this is the same a full power ?, and auto channel does only work when the AP is booting up is that right? i a few site i have set the 2.4 ghz to medium and the 5 ghz to high and this was a spetacular increase in performance and channel distribution and roaoming work much better

Good video , i practived with trafic rules because UBNT does like it that way, but then you can stil ping te gateways and i restriced acces to the gateway but that rule does not work , other people have the same issue and on did report this to UBNT not to be working as expected , but i get the meaning of the firewal rules but have to practice with it on my own UDM , need to isolate at a client the vlans and the gateway and that is by firewall rules as you showed , wil look at the video that teaches the firewall , still need to practice a little bit with this

What is the model of the device used?

Very helpful training guide for this device

How all of apply to IPV6? or we have to do the rules all over gain in IPV6 ?

This is the best video that I've seen explaining exactly what the firewall rules means. For us slow people. Thanks

wery a wery silent speaker, u need speak more LOUDER

Finally a good explanation on how to use the Ubiquiti design center. Been trying to find out how to use it but wasn't getting very far.

Thank you! 😍

Possible to setup local DNS records? I want to access resources from Site A to Site B without inputting the IP address at site B, but instead, accessing by device name, however Site A has no DNS records for the subnet at Site B....access works fine by IP which is AWESOME! But being able to manually create a few DNS pointers so I can type the name instead of the IP would be great!

The video was extremely useful, thank you very much. I created the guest network as described, but I can't connect to it, I don't get an IP address. How to configure the DHCP server? Or on a WAN, only one DHCP server is possible, but then how do I set up the Guest network to get an IP address?

my question is what is not being highlighted. where are all these settings are being saved and operated from?

Hey, really nice video. At 21:30 you talk about customizing the look and feel of the voucher. Could you explain where and how to do?

great stuff thx

Strange that “Group Rekey Interval” is disabled. It’s enabled by default and set to 3600 seconds on every WLAN I’ve ever created with UniFi

wheres the vlan blocking rules?

Old video now but still has same limitations. Good for cameras and office spaces that have limited cabling to space (one cable to run a PC, printer, IP Phone and anything else) BUT..... Yes, there is BUT: Don't use these for multiple WAP's when using bloody meshing. These switches have no STP/RSTP.

Shouldn't the 'All Private IP's' group at 29:57 have a subnet of /16 since the third octet needs to change? I thought with /24 you would need to list each network individually

Great video, as alway! Where does the setting "fast roaming" fit into all this? If it was mentioned, then I apologize, it must have been when one of the kids was asking something :)

One of the best Webinars i ever seen!! Amazing explanation, graphics, presentation! Keep up the excellent job!