Hey guy my t valve is smaller than the inlet of toilet tank. What is the easiest way to get it connected to the tank. Product description says that t valve is 7/8.

GM 👿👿👿. They already had a hatch above the battery - all they had to do was make the hatch a little longer and you replace the battery without disassembling most of the trunk 😠😠😠😠 I had a Chrysler 300M that had a hatch panel in the right front fender well to access the battery, which had my vote for worst battery access ever...until this!

You don't have to take off the 13mm bolts, just loosen the 10mm on the positive cable and unclip the black box thing from the battery on both sides. It was easier for me to just lift up the battery so I could have easier access to the clip on the left and then I pried it off. Also, I didn't have to take off the long plastic piece held on with the torx bolts. They were on way too tight anyway. I was able to pull the trunk liner out from under it.

Thanks for the video. When I put the washer in, the t-valve doesn't fit. If I don't use the washer, it leaks. Please help

You do not need ptfe tape on treads good new washers would seal if tightened properly hand tight plus 1/4 turn with wrench lol

Been working on my Cts it’s been sitting in my driveway for almost a year thank you for this video. It feels good to hear my car turn on.

Thanks for the video. I followed your instructions and was able to replace the battery on my 2014 CTS. Much appreciated.

What is the LED lightbulb you had in there before? I just need LED bulb not the assembly. Could you please tell me the part number and maker of the LED bulb. I also subscribed to your channel.

Great video! I've heard that some cars need their computer reprogrammed to tell the alternator it is now dealing with a new battery instead of an old one or it won't charge the new battery correctly. Is that true for this car?

That's why people go to school to learn things like that to learn how not to have that happen so you're not actually working on it you're attempting to work on it

Duh

That's why you're supposed to disconnect the negative on the battery

Factory amp , satellite radio receiver is different module from radio

The Antenna still picks up signal

How did u take the trunk jam part off? The black plastic piece

I changed my battery and now when I go to start it my car doesn't detect the key fob being in the vehicle despite the fob being in the center fob compartment. Any ideas?

How did you take out the little air hoes on the side of the battery and how did you put it back in? Does it just pop out or no?

W

Hi i just bought a night owl camera today and it won't connect to my phone ot just keep saying loading and loading , what might be the issue? It has wify

the engineers really nailed this one. would have been way to easy to put a small door over the battery

How much was the fan??

Nice job. Thank you!

Thank you! Wow, what a pain. It’s no wonder why the auto parts stores that normally do this for free won’t touch this one. 🙂

AWESOME!!! KZbin video in portrait mode! So easy to watch

💥 'promo sm'

Love your T Thanks for you help 😮❤

Your skills are phenomenal 😮 that's what I am talking about Thanks

Your electrical trouble shutting is phenomenal 😮 Thanks for the help ❤❤❤❤

Great video

Dont buy night owl. Cant reset memory storage if full

Hope this helps any homeowner out there. Don't forget to subscribe please.

So um...is there ANY system other than nightowl that works with the 4k wired cameras? No sound, if that's important. No internet. I just look at it if something is amiss...after all...they dont stop crime...they're supposed to record crime...mine didn't when it counted...

thanks for sharing 🙏🏻

The washer fell out of t valve and I can't tell which side goes in. Both seem logical but not at the same time. Why wouldn't they tell us

My t valve is leaking despite making it tight

👉 Promo sm

Trash you Have to run a extension cord all over the house Lmao 😂

But them brand new from best buy buy wired never buy wireless ever

Hey! Thanks for the video. I am trying to install one of these but the t valve is leaking. The part that is leaking is the connection that goes on the tank of the toilet. I’m not sure what I did wrong. It seams tight enough tho

need help dont know what to do anymore my night owl system which is 6 ton 7 years old now can get into menu I have been on night owl protect I get a code but all I get is secure code error I change the battery I removed the battery my system works I just need to get a hard re set or get a passcode to work I cant I need help

Awesome easy fix! Thanks

There are people bypassing my Night Owl 1080p wireless system. Believe it's maintenance. Anyway, is there away to set system so even if they bypass wifi that the video is yet recording?

Don't buy night owl products, they have horrible support & 2 years later you'll need to buy another complete system.

why would I hit like button at the beginning of video, I may not like it after viewing

why did you film verticly?

Man you weren't very good at showing us how to go through the whole system it'd be nice if you would have walked through each thing showed how'd you connect the camera and done the stuff I mean it was okay but you could have been a lot more detailed than it would have been a lot better video

The grey circular tabs have an eccentric mounting hole that can be used to fine tune and perfect the level of the bottom mounts before sliding on the clear plastic supports. It shows this in the instruction manual.

How tf you get the mounting clips out of the plastic? They’re like stuck in there I can’t get them out

my system (hardwired) w/ wifi booster will not connect to wifi and thus does not allow for remote view

ᎮᏒᎧᎷᎧᏕᎷ