He needs to put the speed higher

Dirty fingernails

What if the heater has thermostat? Will you get the same result?

Very good.

Thanks I never fully understood how to use one of those. Best use I found is leave it in the drawer and replace all the sections with bolts. But yeah I understand if you want to go that way.

Thank you! Very helpful! I’m going to try this!

Don't do what I did and stick a pick in the hole, made the hole huge and the torch is now a flame thrower lol

Great video!! Can this tool read the dpf sensors?

and here is an easier way of vacuum sealing anything that can be airtight kzbin.info/www/bejne/pofZlKWNYrJmfbc

From what I have learned over the years oil bath is oil bath you don't use grease for a oil bath bearing

Ray, try this: Cut right above the "zipper" to get rid of the "extra" so that it fits in the machine. Now, open the bag, fill it, shift the front of the bag a quarter inch from the back and zipper it. You will have a zippered bag that has two openings (one on each side). Now you vacuum the bag and seal it. I just did a test bag and it seems to work (I'm leaving the bag overnight to see if the seal holds...if it doesn't, I will do a double-seal). Ray, if it works for you, you have my permission to make a video of it and post it on your channel.

Hey so question here, is it top rad. To trans side facing port or bottom facing port?

Maybe I missed it but why exactly do you have to put the ridge part in the bag?

This sounds interesting 😊

The best video I've been watching all day.

Can anyone tell me what size the socket is for that valve?

Excellent presentation!

Thanks!

6g is marked on the package and tin, an impulse buy without reading products details is a skill issue

Good work 🍻

i use the cheap ziplock bags as freezer bags? i put the the cheap plastic grocery bags over the cheap ziplock bags i put a note one the bag and knot the bag the regular freezer bags are double the price of the regular bags i freeze my leftover crock pot food in a freezer bag and do the same thing with a note on the bags with the date the the cheap plastic grocery bags to cover my leftover plate of food and knot the bag at the end of the bag. The the cheap plastic grocery bags to cover my cut watermelon or cantaloupe the cheap plastic grocery bags for a broken candy Ziplock bags bags double bag knotted end of bag wheelchair larry

i pressed the pump on there better and it stopped leaking, but then when i pressed the button it sprayed the windshield but started leaking again. You think its the grommet gasket thing seated in the reservoir?

I dont give a shit that you had the sniffles, good diy lift pump replacement video.

I was able to finally repair the throttle lock/operator presence lever on my 390XP. After watching your video and various other videos (two more I believe) and reading the official Husqvarna workshop manual, I gave it a try. The problem I was having was connecting the spring to the trigger, I was overthinking the darn (@#$%Q) thing. The spring portion that goes to the trigger has a hook at the end, and it was my understanding that it had to hook into/onto something. In the end all I did was place the end of the spring on top of the trigger rail, and pushed it forward. I found this out by mistake as I was giving up and it worked! On the successful try, I had the lever installed in under 30 seconds. Now I have to repair my broken throttle lock on my 372XP, which doesn't have a window in the hand grip. There is no way I could have repaired this without the window. Thank you for providing this video, I could not have repaired the saw without it.

You tell them to keep it away from their skin, but absolutely do not get it in your eyes. Or you will be blinded.

Cool video. However if you want to compare your powder to Triple 7 or any other type of powder you need to shoot it. How much velocity do you get from a given charge with the same rifle, patch and ball? That's the real test.

Are u able to measure the threads size and pitch. I have one of the first ones they’ve made and need parts but they only have parts for this version and newer and don’t put any specs on the website. That would be a HUGE help to me

Good video man, thanks for the info!

I'm here in saskatchewan as well and teaching myself mechanics. I've recently done my sway bars and now I'm learning how to remove the water pump. What a shit show of engineering on the 2004 chev impala let me tell you. I've tried removing the ps pully but had no luck. Now I see there's an easier method. Thank you! I will try this later tonight

yellow bottle = MAPP Gas. Blue bottle = Propane

You don't need to add sugar or anything?

Look amazing too you wanted tsskk h

My F501 started surging at low rpms and would barely idle. I tried this and it worked great, runs like new again, thanks! (Only thing I would recommend is taking off the airbox to get at the jet easier)

Yeah I’m trying to do the same thing with my how did you get around it. I’m pissed only be 10 months

Hi everyone, does anyone knows what might be the cause of this? I got a propane torch and a 20 libs gas tank, I used for few times and it worked perfect, I tried again to use it and it has a very weak flame now. I tried with a 2 libs propane tank and it works perfect. The 20 libs propane tank worked in the beginning and it still nearly full tank, is not empty or anything like that.

Great thanks

Thank you for this video, my son left his ziplock v 110 sealer at my home, I wasnt interested untill today. I found your video had to watch it three times mostly because I kept walking away and not paying attention. 🙄 Finally sat down to watch full video, its so simple, thank you! Now I can vacuum seal all my bulk buys using regular freezer bags, because yes, the sealing bags are expensive. Thank you again and yes I subscribed.

Ok 👌, thanks brother

MAP gas almost always does this to my torches. I hate using it for this reason and mostly stick to the propane to avoid this problem. But the other day, I needed a hotter flame, and after I got done sure enough, it's clogged again...

Thank you for the video. My 18yo Columbia has 58k original miles and I spent an hour and a half plus a half a can of PB blaster and my engine brake never worked so good. I think it was stuck from day 1

Thank you for sharing this. I am about the start this exact repair.

Thank you for the info!!

8 inch crane fruehoff asbest free liner ferrodo maybe 3 rivet corner stainless rivet.

So as you accelerate that flap should move? I have a mbe 4000 in a sterling and when I accelerate a check engine light comes on and if it stays on my engine brake and my engine fan stop working. Was your issue similar?

This video is awesome. I have this problem and this is the only video i could find of the same tip that it is. Thank you so much

Mine acts the same way my husband replaced all the gears like you did in your other video and it still doesn’t work so good I’m disappointed in myself for buying one

Thenx 4 the lesson bro

Great video. Ten minutes, both headlights were replaced. Thank you.

Thanks for the video, really helped me when i got stuck with an uncooperative torch

The torque sheet on the trailer says 300 max why did you do 500