Martin's - Networks & Telecommunications

Пікірлер

@bestcreate1417 23 сағат бұрын

Can it run fortnite

@Martin-NT 22 сағат бұрын

I don't have any experience with Fortnite, however, I think it will work on low to medium settings. This is meant as a mobile workstation and not gaming machine.

@ichigo3223 12 күн бұрын

The USB connector in these are designed to break and they are terrible. In my work place we have to replace a few of these every month, just because people break the connector by accident or by not being careful enough. Luckily we can get them replaced with Dell if they are under warranty. The problem is that the connector is way too long and sticks out far when connected to the laptop/tablet. They should have designed a 90 degree connector on the docking station cable to help with stress relief and make it stick out shorter.

@Martin-NT 12 күн бұрын

I agree with you, the 90 degree design would help a lot. The connector is long but thin which makes it vulnerable to breakage easily.

@jzeman 12 күн бұрын

Did you ever figure out what was wrong? I bought a c2225 (slightly slower model) and it printed the first few pages fine-ish there were shadows and slight yellow tint. After a maintenance internal cleaning it started spitting out blank pages... toner cartridges felt really light but no out of toner message so I figured I replace those and no effect. I did noticed the drums have an awful lot of toner on their surface... I would expect bad prints not blank pages... as far as error 74. Got that once after taking the back drum out to check it. Error went away after power cycle

@Martin-NT 12 күн бұрын

It can be related to a faulty or bad ITB unit, it's a unit with a thin film with the purpose of moving the toner from the drums to the paper. That's what was wrong with my unit.

@jzeman 12 күн бұрын

@Martin-NT i get that error all the time now. My maintenance menu says replace itb ad first suggestion... ugh I guess when these printers sit for a long time they print ok until you do a clean cycle

@Martin-NT 12 күн бұрын

@@jzeman If you have a service provider I recommend calling them to diagnose the issue or contact another printer technician company.

@domiblack2k182 14 күн бұрын

Thanks KZbin, for suggesting this video to me.

@TechnoMinded-qp5in 16 күн бұрын

Oh maaannnn I miss these kind of phones if Smartphones become a privacy nightmare let's bring back landlines and pay phones to cut the bills in half my folks probably don't want something like this even though I think it's a good idea just in case of power outages.

@Martin-NT 16 күн бұрын

Agreed! Landlines and IP Phones aren't going away anytime soon, especially IP Phones.

@lewiskelly14 16 күн бұрын

Seeing this as the first video without briefly covering some context is confusing

@Martin-NT 16 күн бұрын

Sorry if that has confused you, I recommend you watch my previous phone system tour videos then as this series is to show the progress I've done to my home PBX.

@apricotcomputers7915 16 күн бұрын

are you phreaking kidding me!!!

@MichaelWallace-oq3wd 17 күн бұрын

Do you have discord :)

@jaygreentree4394 17 күн бұрын

You can buy wall plates to mount phones on.

@dave24-73 17 күн бұрын

Nice thing with freePBX is you can run it on something as simple as a Raspberry Pi.

@exboisv 17 күн бұрын

I have freepbx in my house for personal use. I never registered it with FreePBX. Have you registered your system and if so, did they give you any issues?

@Martin-NT 17 күн бұрын

By registering, I'm assuming you mean register your instance with Sangoma. I haven't had any issues without registering it but to install commercial modules you must register. For homelab not registering it is fine.

@Subgunman 19 күн бұрын

Waiting to figure out how to reprogram my Cisco phones to SIP. Can’t get the phones to take the programming, very frustrating. Do I have to do reprogramming through free PBX because trying to reprogram via direct connect to a window computer does not seem to work. Even on the help sites there are some individuals with serious attitude issues like they are in god mode and seem annoyed at receiving questions. As for hooking up to the outside world I have a 4 port Grandstream FXO box. For external connection to the pots line, I have a Grandstream four port FXO adapter. The reason for this I’d that these older Cisco phones have (had?) a security exploit where people could hack into your network and into your computers on everything inside your home network. This adapter will also allow me to add a pair of two way radio interfaces to Pots line adapters to the system. This allows me to monitor what is going on with a radio network as well as allowing radios to contact me directly at my office. If you have any suggestions on reprogramming older Cisco phones, please share. It would be greatly appreciated!

@Martin-NT 19 күн бұрын

Cisco phones on other PBX's instead of CUCM can be infuriating. I've registered my Cisco phones on FreePBX as I have the 3PCC verison.

@_tylerkinney 19 күн бұрын

Can you do a tutorial with setting up tandx with freepbx? That would be SICK!

@Martin-NT 19 күн бұрын

Unfortunately I'm not enrolled in the TandmX network so I can't do that. I do remember trying to do it once but gave up after a while.

@d0tbr3w 23 күн бұрын

coolio

@MickeysTechSpot 26 күн бұрын

Have you ever tried to use a magic jack connected through a ata box to get outside lines 😎🤗🤗🤗🤗🤗🤗😣😁

@Martin-NT 26 күн бұрын

Nope, but theoretically that could work.

@trincolio Ай бұрын

how do you set a custom tone for paging?

@Martin-NT Ай бұрын

Please check the comments below as somebody asked the same question.

@DanielTekmyster Ай бұрын

After years of running cisco, indecided to try freepbx 16 and what crap…. Every way I try and install it I run into some sort of issues at one point or another

@Martin-NT Ай бұрын

FreePBX can be difficult to get set up if you are first starting with it. I recommend browsing the FreePBX forums and watching tutorials online. Chris from Crosstalk Solutions has an excellent series of videos on FreePBX for beginners.

@connorpearl9415 Ай бұрын

hey amazing video, i would love to see how you did custom page sounds, i have freepbx set up an right now im just using the default beep tone and i really hate it lol.

@Martin-NT Ай бұрын

You can upload a page tone through System Recordings and then set it through the Paging and Intercom tab.

@connorpearl9415 Ай бұрын

@@Martin-NT thanks, i didn't know how easy that was lol

@Martin-NT Ай бұрын

@@connorpearl9415 no problem

@captainchris2016 Ай бұрын

What did the poly phones do? Have not had very many issues with the ones I have

@Martin-NT Ай бұрын

Well, Paging and Intercom does not work on it unless I set it into auto answer, and I've also had issues in the past where it would not place or end calls properly.

@captainchris2016 Ай бұрын

@@Martin-NT you have to put a few lines into the phones config files to get paging to work. The Polycom templates in the freepbx endpoint manger which I use for my community PBX has those but you can just add those by exporting the phones config and adding them and importing it again

@Martin-NT Ай бұрын

@@captainchris2016 I see, thanks for letting me know. I'll look into this in the future.

@_tylerkinney Ай бұрын

Why name the extensions sta? That’s not descriptive what does it mean

@Martin-NT Ай бұрын

To be honest, I don't really have a reason for having it named STA #, STA just stands for "station", such as station 310.

@_tylerkinney Ай бұрын

@@Martin-NTinteresting! Also just to tell you, don’t feel ashamed for being late for the 3.5 tour, take your time. ;)

@Martin-NT Ай бұрын

@@_tylerkinney Thanks!

@Jayden-et3uc Ай бұрын

do you have a discord server?

@Martin-NT Ай бұрын

I do but it's mainly inactive so I don't really advertise it or use it

@SixThreeTech Ай бұрын

about time lol but nice video, i should make one soon.

@JonathanMakrodimitiris Ай бұрын

do you need to change anything on the cisco phones with the software like om the 7900 series or do the 3PCC ones work without a firmware change

@Martin-NT Ай бұрын

The 3PCC phones do not need a firmware change. For the 79XX series, I believe you need to change the firmware to SIP for FreePBX but there are plugins like SCCP Manager that you can use. I don't have much experience with 79XX series phones though.

@_tylerkinney Ай бұрын

There’s a descriptive guide on KZbin if you search “How to convert non 3pcc Cisco phone to 3pcc”

@wolfzarrowalarms Ай бұрын

Great Video Martin! I love all of your FREEPBX videos!

@Martin-NT Ай бұрын

Thanks for your feedback!

@Martin-NT Ай бұрын

Apologies for the long overdue video, but here it is, FreePBX Home Phone System Tour 3.5! If you got questions, feel free to comment them below and I'll respond! We'll have a Mobile Workstation review video coming up soon as well so keep your eyes peeled for that. Hope you enjoy the video!

@Martin-NT Ай бұрын

This is NOT a new upload, uploaded it as unlisted and forgot about it. Oops. Now fixed to be set as public. 🎉

@ishanaggarwal93 Ай бұрын

Can i receive and make calls while travelling abroad on same number?

@Martin-NT Ай бұрын

That will depends on your PBX and your configuration type. But yes, you can take this desk phone with you while travelling abroad.

@ishanaggarwal93 Ай бұрын

@@Martin-NTpls suggest which pbx will be suitable and how to achieve this.

@Martin-NT Ай бұрын

@@ishanaggarwal93 I recommend 3CX as it is simple to use and provision. I have a video on provisioning this phone with 3CX as well. If you provision to the cloud with their supported method, it will work anywhere with internet.

@ishanaggarwal93 Ай бұрын

@@Martin-NT thanks for update. I guess 3cx needs sip number. But in tanzania, there only mobile or land line number. No sip provider. Can we use our existing mobile numbers in tanzania to connect to 3cx if its somehow possible?

@Martin-NT Ай бұрын

@@ishanaggarwal93 I'm not sure, you may need to go with another service from another country

@Chrisalsersmith Ай бұрын

how do you get a cisco phone to conect to free pbx

@Martin-NT Ай бұрын

I used the 3PCC version to provision it.

@Chrisalsersmith Ай бұрын

did you provision it trought the web gui

@Martin-NT Ай бұрын

@@Chrisalsersmith Yes

@Chrisalsersmith Ай бұрын

@@Martin-NT thanck you for telling me

@datogamer1502 2 ай бұрын

Is it for gaming?

@Martin-NT 2 ай бұрын

No, this computer is a "mobile workstation". Designed for business usage such as CAD, spreadsheets, and other things. It does have a discreet graphics card and I do use it to game a bit, however, no it is not meant for gaming. For more information, you can watch my full video on this workstation in my channel.

@SinaLotfi-hn5rg 9 күн бұрын

İ have this laptop but this not have backlight or i can't turn on this How turn on this(?

@Martin-NT 9 күн бұрын

@@SinaLotfi-hn5rg It depends on the configuration your laptop shipped out with. If you don't see the backlight icon on the F10 key, it means your keyboard was not configured with a backlight. If it does, you can press the F10 by itself or simultaneously pressing the Fn key with the F10 key to toggle the backlight.

@JMWtrainsnstuff 3 ай бұрын

Thats not a Dual-Lite emergency light

@Martin-NT 3 ай бұрын

It is, if you search up the Dual Lite LZ series you will get that model in the video.

@JMWtrainsnstuff 3 ай бұрын

@@Martin-NT Nope. That is a Yuyao Lixen emergency light. Dual-Lite LZs look similar, but 9 times out of 10, they are equipped with Spectron self diagnostics.

@JMWtrainsnstuff 3 ай бұрын

@@Martin-NT Also, Dual-Lite LZs have the indicators and test button on the right side of the unit, not on the bottom.

@Martin-NT 3 ай бұрын

Alright, thanks for letting me know.

@hariranormal5584 3 ай бұрын

How did you exactly do the cloud hosting part?

@Martin-NT 3 ай бұрын

You go with any cloud provider such as Linode or DigitalOcean. 3CX also has solutions for that as well.

@hariranormal5584 3 ай бұрын

@@Martin-NT And there aren't much videos for freepbx anyway, can you make a tutorial for it?

@Martin-NT 3 ай бұрын

@@hariranormal5584 Can you let me know what you need assistance with? I can help with installation, provisioning, and some other things.

@hariranormal5584 3 ай бұрын

@@Martin-NT oh, I was just curious, when I search freepbx install videos the one video from crosstalk channel is so long it's like a cert course, there just doesn't seem to be quality content where they actually show a real life example for example take these 3 IP phones, one server with freepbx installed, and linking it to a VOIP sip Number or something. Just curious

@hariranormal5584 3 ай бұрын

tutorials for Freepbx?

@josephphillips865 3 ай бұрын

I've totally refreshed my 3520 with 7th gen i7 that I got for free and am using it now. It was completely dead / would not post due to a corrupt bios when I got it. I used a old flash drive and I was able to do the Dell bios recovery procedure. Installed a new keyboard, new thermal paste, replaced the battery, fresh bios battery, upgraded to 32 GB ram and a 1 TB NVME SSD.

@Martin-NT 3 ай бұрын

These laptops are great machines. Upgradable and repairable make them have a longer longevity than other laptops. I plan on using the precision models for the foreseeable future.

@lloritoovidexequield.8609 3 ай бұрын

So, is this a good computer for basic computing in 2024? Does the keyboard area have some bounce or flex in your particular unit?

@Martin-NT 3 ай бұрын

This computer can actually do more than basic computing, I've been able to run 3D modeling software, some games, a flight simulator, and more with this machine. Typing on this keyboard is good similar to other latitude and precision models, the keyboard doesn't really flex either and the travel is good for a laptop.

@lloritoovidexequield.8609 3 ай бұрын

@@Martin-NT I see, thanks. =)

@Martin-NT 3 ай бұрын

@@lloritoovidexequield.8609 No problem

@IntercomEnthusiasts51 3 ай бұрын

Do you have a business email?

@Martin-NT 3 ай бұрын

My business email is not available at this time since the mailbox is not configured properly, please reach out to me on Discord instead, my tag is "linuxce".

@IntercomEnthusiasts51 3 ай бұрын

Hello Martin, i really like your phone systems and i have some Cisco phone's that i will like to give to you if you're okay with that. i also have a amplifier and some Vtech phone if your interested in creating a paging system and i can show you how it works. all you would need to get is some bogen or atlas speakers. Let me know if your interested! MK Peterson

@Martin-NT 3 ай бұрын

Hey there @IntercomEnthusiasts51, thanks for the offer. I'm not too keen on these Cisco phones as I've had a rocky relationship with them in the past, however, I am interested in expanding my current "paging/public address" system, right now I only have IP Phones as my paging endpoints but I would be more than happy to check out your amplifier. Thanks for reaching out!

@IntercomEnthusiasts51 3 ай бұрын

@@Martin-NT sounds good look at my banner for more info

@kennywest223 4 ай бұрын

Love this video! have a question, noticed you called an extension with a number and it rang then you called the same phone with a different number and it auto answered. It that a function of the phone or free pbx?

@Martin-NT 4 ай бұрын

Yes, you can use the intercom code *80 for the phones to auto answer. Thanks for the feedback!

@Martin-NT 4 ай бұрын

Hello everybody! This IP PBX Phone System tour is around five months old now. Do you think I should make an update video? Let me know your thoughts on what you would like to see in the next tour by replying to this pinned comment!

@Jayden-et3uc 4 ай бұрын

In 3.5 you should add a cisco 797g i think it's called

@Martin-NT 4 ай бұрын

@@Jayden-et3uc I'll consider adding new phones to the upcoming tour. Thanks for your suggestion!

@tpzd1063 2 ай бұрын

Yes

@Martin-NT 2 ай бұрын

Dang, I forgot all about this thread. Sorry about the eight month wait, I will try to get a video out this week so stay tuned!

@Jayden-et3uc Ай бұрын

@@Martin-NTcan you try to get a video out this week?

@wolfzarrowalarms 4 ай бұрын

Did You Use Virtual Box VMWare To Download FreePBX?

@Martin-NT 4 ай бұрын

No, I got the FreePBX ISO file from their official website. I am currently running Windows Server 2019 on my server and FreePBX is a virtual machine within Hyper-V.