Sure glad you didn’t explain what you were doing. Would have sucked if you did
@greyn22872 жыл бұрын
На какой дистанции стреляли? С каким увеличением?
@greyn22872 жыл бұрын
На какой дистанции стреляли? С каким увеличением?
@SwiSs-SHooter2 жыл бұрын
hi , can i ask you something about the handpump pleas ? i wanna buy one but i dont know wich normaly i see your video here i think the gx is a good pump but now its a brend new handpump from hill mk5 and i dont know wich from this two to buy can you recommend one of these two gx. or hill mk5 ?
@greyn22872 жыл бұрын
Ролик для глухих…
@mejribessem47822 жыл бұрын
I have one (Hill MK4) but withiout dry pac 😓
@kmshamry3 жыл бұрын
Hello, how are you. What is the manufacture of Scope and is it HD lenses?
@Groundshark233 жыл бұрын
Hey man, i think your demostration about glass quality is awsome!. Greetings from Finland!
@ppmnox3 жыл бұрын
I find your *through the looking glass* optic tests incredibly revealing of the overall *glass* quality. This is, IMO, missing in so many scope reviews. Bravo!
@sorow1233 жыл бұрын
How happy are you with scope.in low light conditions?
@Hipporider4 жыл бұрын
Do you have any problems with the minimum parallax adjustment only going down to 25 metres?
@lunatic2314 жыл бұрын
Lol this to me is the best way to fill PCPs nothing wrong with this
@danmacdonald12914 жыл бұрын
Great video demonstrating the sight picture mate, just curious though, were you filming through the scope looking through a window? Or was the objective lens the last element between the camera and the out side atmosphere? Cheers, Dan.
@jeff22airguns233 жыл бұрын
Hello Dan Yep, there's a window, I was inside, filming the outside. I did another video 100% outside filming cows, you can have an idea on exit pupil Hope its help
@subsWithnovideos-qk4ek4 жыл бұрын
The Chinese pump is better and it cost 50 buck. I paid 190 for mk4 this pump suck. Despite continuous pump, it only pass 1 and haft bar, will not go pass regardless. And I only use it twice. Will not recommended.
@matthewphillips54834 жыл бұрын
You got a defective one. Hill pumps are usually the best hand pumps by far.
@srfsummers62612 жыл бұрын
Lol, do you sell pumps by any chance?😊
@jimhutchinson65444 жыл бұрын
Hi does this scope adjust down below 25m or is that the minimum?
@Hipporider4 жыл бұрын
That's the minimum parallax adjustment, 25m or was it yards? I want to know if this is a problem on a FX Impact
@mohamedabdoola11594 жыл бұрын
Some brilliant shots & slow mo footage👍🏻. What pellets were you using? Thank you
@blarza0074 жыл бұрын
Hi Jeff nice video how do you actually adjust the trigger blade that is moving twisting do you just turn it was thinking of doing that but didn’t want to do any damage thanks Matt
@ohhhyeahyeahyeah97184 жыл бұрын
How can i open the valve
@hpekdemir4 жыл бұрын
Hi Jeff, how is the scope holding up? Do you still have it?
@drekceldude4 жыл бұрын
Does fitting the Huma reg and tuning giving more power,why I ask is I shoot my US spec Streamline .22 on full power wheel setting,I would like the same power output on power wheel setting but on 2,so have option to turn wheel up to 3 when using higher GR pellet.
@TheSniperno994 жыл бұрын
nice video thanks for sharing ,even with your video i wouldnt do it myself as im useless at such things ,did fitting the huma reg make the gun more accurate ? thanks
@Gw0wvl4 жыл бұрын
bloddyhell mate, You must be so out of shape :-) ... Take your time pumping it, Its not a race .
@jeff22airguns234 жыл бұрын
Hahaha yes your right
@bloodstriper36494 жыл бұрын
As much as I'd like to get a PCP, I'm turned off by these pumps and I'm damn sure not buying a freaking tank I'd have to lug around. A compressor is a ludicrous proposition. Trust me, I lugged SCUBA tanks around for 14 years having them visually inspected annually and hydro tested every five years. If you buy a tank make sure it's brand new with same year you buy it marked on the cylinder. I'm not sure if you have to do visuals on carbon cylinders as we don't use carbon in SCUBA.
@steveohim4 жыл бұрын
Wheres the filter?
@Gw0wvl4 жыл бұрын
There at the rear inside the clear canister , Clearly visible in the video.
@stephj765RS4 жыл бұрын
FX manual clearly states that the gun should not be dry fired when empty of air. Not sure people read your note before they proceed. If they didn't, they could have end up with a bent valve stem... This crucial warning should have been in bold text on the video itself :)
@jeff22airguns234 жыл бұрын
True. I did my best at the time
@stephj765RS4 жыл бұрын
@@jeff22airguns23 Don't get me wrong, I think your video is great. And I couldn't find any other one showing thie reg removal/installation for the FX SL. However I found one from Ernest Rowe showing a trick to bleed the Wildcat, which has a hole through which he can compress the valve stem. And guess what: the SL has got a similar hole. kzbin.info/www/bejne/bWqze2CZhNmll8U Note that I haven't tried (yet). I always try to figure out what can go wrong before I do sthg.. Making too many assumptions when playing with high pressure may result to disaster...
@tofast54194 жыл бұрын
So your refilling the air cylinder from empty to full. I notice that it took you more them 10 pumps to get to 150 bar. I had my hill pump for a year now. I took it apart and found a lot of dirt and grease. So I cleaned it and put it back together. I notice when I used it at the top of the stroke air would come out. I think it's time to rebuild it.
@twistedgooner64724 жыл бұрын
This has just put me off a pump I'm buyi g a bottle now lol
@jeff22airguns234 жыл бұрын
XD
@adriannavarrocuetara54695 жыл бұрын
Ey bro, what you want show in this video? Problem valve? And extra o-ring in the regulator???
@rickye77385 жыл бұрын
What the heck are you doing?
@sambernard51195 жыл бұрын
Does the vent hole have to align perfectly?
@jeff22airguns235 жыл бұрын
I cant really say, I think the most is the best
@sambernard51195 жыл бұрын
@@jeff22airguns23 Took me a while to figure out that you need the vent hole at the 12 o clock position, check the fitting instructions on the huma website. works alot better now
@jeff22airguns234 жыл бұрын
@@sambernard5119 oh great! thanks for the tip!
@shooteam80235 жыл бұрын
More info about Stryker gen II kzbin.info/www/bejne/lZe6n32un6qhmc0
@shooteam80235 жыл бұрын
Tomorrow I'm gonna buy Stryker with 1T reticle with new turrets for long range shooting
@jeff22airguns235 жыл бұрын
Oooow man! So cool! Enjoy :D
@richardjones28115 жыл бұрын
Can I ask what Scope is that please. I really like that reticle
thank you for this I have been waiting for the locking turret version for long range and foxing.
@jeff22airguns235 жыл бұрын
I have to say on mine, I dont think the no lock is a problem: its really well made so it doesnt move. But Im using airguns, I wouldnt say about firearms and big bore caliber
@jeff22airguns235 жыл бұрын
@Rudi Boets YEPEEEEE
@Bigsbeee5 жыл бұрын
Have you tried the SFP 5-50x56 ?
@jeff22airguns235 жыл бұрын
No! But I really want it! One day!
@tytorubio32715 жыл бұрын
Thanks for the tip about unscrewing the hammer spring! I didnt do that last time. Those huma regulators are great! I bought one for my bsa r10 se two months ago but couldn't chrono it untill yesterday. I was more than impressed. 242, 242, 242,241, 241, 242, 241, 241, 240, 240,241... Wow..
@bogdanbatkovich55325 жыл бұрын
Good day! Would you recommend this scope? Are there any minuses for long-range shooting?
@Erasmuspipebagger15 жыл бұрын
Got one exactly same. Poor is an understatement. the hilariously bad part is the way the 12 by 1 earring attempts to seal inside a threaded bore, and because obviously can't, there's lashings of glue been applied possibly at the manufacturing site.
@shooteam80235 жыл бұрын
all scope reviews should be like this. thanks!
@lance51215 жыл бұрын
I just read that dry firing FX airguns without any pressure behind the valve will damage the valve
@jeff22airguns235 жыл бұрын
Thats true. Thats why I said on the description to unscrew the hammer spring at max for minimize that The best is not to do it but be careful with air
@lance51215 жыл бұрын
@@jeff22airguns23 thanks, I watched your video without reading the description my fault. Hopefully my valve is okay I'm just a little worried I might have bent it or something
@lance51215 жыл бұрын
@@jeff22airguns23 would you know the symptoms of a bent valve?
@lance51215 жыл бұрын
My Huma didn't come with a screw so I could remove it to make adjustments. What size screw is that?
@jeff22airguns235 жыл бұрын
I didnt get any screw too, I was lucky to find it in the toolbox Im sorry I dont know whats screw it is
@lance51215 жыл бұрын
@@jeff22airguns23 It's okay, thanks anyway
@sfzx545 жыл бұрын
I thought the wait was for a second or two at top and bottom of the pump stroke? Is this pump still working today?
@jeff22airguns235 жыл бұрын
Oh I didnt know that. I used this pump for two years now, its still works great and I didnt dissasemble it yet for cleaning. (just lubed the tube) I hope I dont have to wait 2 seconds between each pump because I never did that
@megunded5 жыл бұрын
what scope is that please ?
@jeff22airguns235 жыл бұрын
Its Delta Stryker FFP. I put some vids about it on the channel if you want.
@fc11335 жыл бұрын
Thanks for posting. On my Bobcat the safety engages even if the gun is not cocked, which is really annoying. I did not used to be that way, but my dealer screwed the up. I tried adjusting it, but the trigger plate is not coming up as much as yours does. Any ideas why? Thanks.
@jeff22airguns235 жыл бұрын
I never get a Bobcat in my hands, I cant help you for now Im sorry ;(
@TheTriniplayers5 жыл бұрын
How much did this increase the shot count ...and is the power adjuster still functional?
@jeff22airguns235 жыл бұрын
I cant say about the shot count: Im still in an "experience phase" so I dont really know, and I didnt note anything before installing the reg. Im now close to 1/2 m/s I was like 3/4/5 before installing the Huma. The power adjuster is still functionnal, it depends on the BAR setting of your regulator. My test was like 115/120 BAR is ok
@stephj765RS5 жыл бұрын
Hi Antoine. Is this moderator the Weihrauch 1/2 UNF? (see below URL) I'm planning to buy the FX Streamline sooner or later, but I'll definitely need a GOOD moderator. weihrauch-sport.de/wp-content/uploads/2015/08/Schalld%C3%A4mpfer-m.-Gewinde.jpg Thanks for the video ! Steph
@Guide5045 жыл бұрын
Delta confirmed no locking turrets on the 4.5-30 Stryker until after shot 2019 at least. The 5-50 is starting to arrive with them now.
@jeff22airguns235 жыл бұрын
Oh ok! Super great Im looking for the SFP I will ask. Thanks man
@jeff22airguns235 жыл бұрын
Or maybe they will sell the "old" Stryker SFP cheaper hehehe