Your installation looks great! Do you perhaps know what harness/quad block (model number etc.) works for the 2022 Haval H6? I see the head unit does not appear to output high fidelity range :-(
@mohammedahmed786786Ай бұрын
Are you based in the UK? I HAVE BEEN STRUGGLING TO GET HOLD OF THE CORRECT FASCIA FRAMES THAT COME WITH THESE ANDROID HEAD UNITS AS THEY DO NOT SIT FLUSH WITH THE FAN UNIT ON THE LEFT SIDE!! PLEASE SEND ME A LINK TO YOUR PRODUCT OR BRAND BECYASE IT SEEMS YOU HAVE A UNIT COMPLETE WITH A FRAME THAT SITS FLUSH WITH THE FAN UNIT ON THE LEFT AND RIGHT!
@fastquickaudio5890Ай бұрын
Please contact me via email, i can give you solution for this. [email protected]
@jaylover9895Ай бұрын
wtf you doing you ain’t explain shit
@AdrieneTilman-d4o2 ай бұрын
Spencer Lodge
@qzzx2 ай бұрын
can you do this with a bmw f30 ?
@martinandrovic5042 ай бұрын
Hi, my vitara S from 2016 is extremly noisy inside i can barely hear my music, is your vitara as noisy?
@halukanlarАй бұрын
I have a 2020 and yes they are as noisy as Japanese cars get... It badly needs sound insulation on door panels especially..
@yamaguchi-gumi81392 ай бұрын
Can i put harman kardon ?
@byronhall51453 ай бұрын
I've just tried to fit my afternarket radio but no power. Looks like i have to run a wire from the red cable on wire harmess to cigarette canle?
@Honeybzr3 ай бұрын
@@byronhall5145 correct
@migofrmdaa31823 ай бұрын
Idk why he did that 😂😂 he gone blow them mids and highs out😂😂😂
@kalumjayasingha89973 ай бұрын
Meke cd danne kohomada
@shanebrade35984 ай бұрын
What colour is the factory wire that is the remote turn on switch for an amp. Thank you!
@seanhammon66394 ай бұрын
Thanks!
@NL-SanderH894 ай бұрын
I used this howto to install carplay in my mazda today, it works like a charm. However, i found that you don’t have to remove the horizontal strip on the dashboard, i still did it, but it wasn’t needed. I just took out the glovebox, bundled the cables behind it, and could reach both the radio and the carplay unit from there. Thank you for this detailed howto
@Super3ver5 ай бұрын
No rear sound for me 😭😭
@stickitsignage18775 ай бұрын
What is the actual point of this video? It didn't show a single thing about HOW to actually do the replacement? It's just like a crappy version of what would have simply been a before and after photo but with shit music.
@xgamez56985 ай бұрын
Great video! Good job 👍
@stevolb135 ай бұрын
This is the worst video ever, i dont know what wire is what no explanation what so ever. Thumbs down.👎
@damon85415 ай бұрын
Is it possible to do stereo upgrade but keep OEM camera?
@fastquickaudio58905 ай бұрын
Yes, you can connect existing camera.
@matej19-pr7ku5 ай бұрын
From were is memory Cable?
@OratileTau-dm6qn5 ай бұрын
Nice Vedio indeed. Next time upgrade your mic. And minimise background music.. it was simple and straightforward.😊
@fabiancampbell41366 ай бұрын
Thanks for this video, it was very useful.
@kaleemullahsaeed71676 ай бұрын
Shop location?
@bobbymike6 ай бұрын
Great vid my mate best one for Mazda 2 out there, 😊
@ragezoul7 ай бұрын
What if you had an equalizer with a sub out rca as well?
@LocDawg2187 ай бұрын
So i can run my 4 channel amp for my mids and highs and still use the subwoofer output for my mono block ? With my factory Head unit how woulld i wire that up. I also dont have equalizer.
@HaydenMoon-tw3zb7 ай бұрын
Is there a kit for the 2007 ML Triton? Can a Mn triton steering wheel be upgrade to the MN triton to add the controls?
@fastquickaudio58907 ай бұрын
Im not sure about the vehicle you talking about. If you can email me then im able to help you. Email- [email protected]
@basserex49917 ай бұрын
Hello! i have question. What is the difference between Bass restornation a EQ? I have weird issues in my car. I fight long time with this, nothing helped. Issue: RCA output voltage loosing, and weak bass. All options hecked and nothing work... So, This is my last resort. Can me help The equalizer itself? or i must get a bass procesor restornation? I know that EQ help the voltage, but Will it help improve bass sound? (Bass is noo dep, is empty, not loud, sometimes bass can be amazing). Thanks!
@fastquickaudio58907 ай бұрын
Can you please email me all the details with photos, i want to see what you currently have. Email [email protected]
@basserex49916 ай бұрын
@@fastquickaudio5890 I writed! I think, problem with bass is Standing waves, but how, i can do eliminate this?
@nicellezama34937 ай бұрын
Wats the name of dis radio deck
@fastquickaudio58907 ай бұрын
This is SONIC
@ngunandikayogaputra587 ай бұрын
My mazda 2 skyactiv headunit stuck on logo, But the radio and camera still normal. How to solve this problem ? Thanks
@fastquickaudio58907 ай бұрын
You can try to hard reset. Information available on google. How to do hard reset in mazda using 3 buttons.
@mrjunior14697 ай бұрын
Thank you very much, I have a question. Will it be the same for a Kia cerato Koup 2017 ?
@fastquickaudio58907 ай бұрын
If dashboard looks same like this then yes
@K_Vang239 ай бұрын
Question, do I have to connect all 4 speaker inputs on the LC2i or can I just use the left side since I will be tapping to the factory sub only?
@fastquickaudio58907 ай бұрын
You can tap on one front speaker to install sub or to use lc2i. But I would recommend to tap on both front speakers for best results.
@redbaron24489 ай бұрын
Is there link for part 2 LOC2I
@fastquickaudio58909 ай бұрын
There is no other video on lc2i yet.
@redbaron24489 ай бұрын
@@fastquickaudio5890 alright thanks
@southsideblvd3409 ай бұрын
This is wrong! Its very clear that the setup is headset/EQ - Crossover (if installed) - Epicenter - Amplifier. kzbin.info/www/bejne/aKqkiWyufsqoh9Esi=e8jV8vP97Ww-8gl6
@fastquickaudio58909 ай бұрын
Epicenter and lc2i both works on different principles. Epicenter made for music that doesn't have Bass (eg old music made in 70's). Where lc2i restore the bass in factory systems, when you install aftermarket speakers and subs using amps.
@lucianoking59 ай бұрын
I’m wanting to run three separate amplifiers one for my front door speakers one for rear door speakers and one for my subs can I still use the LC2 to run three amps or what do you recommend 🤔
@fastquickaudio58909 ай бұрын
I would suggest run 2 amps only and lc2i has outputs for sub n speakers. Run 1 amp for speakers and 1 for sub. It will make your job easy and it will Reduce your cost as well.
@andtastic19 ай бұрын
could this be done on the Warrior model as the head unit looks identical? cheers
@fastquickaudio58909 ай бұрын
It can be done on any factory system. If you have aftermarket system then you don't need this.
@Loukisi909 ай бұрын
Would this mod enable a japanese car have access to full range of FM stations? Because at the moment the range is limited to the Japanese band.
@fastquickaudio58909 ай бұрын
Updating Software or installing apple carplay does not change FM frequencies. You need a FM band expander. That unit is located under dash near steering wheel. Very easy to install.
@Mar83089 ай бұрын
link of the radio JBL
@Sameerahuja66210 ай бұрын
Where did you ground the Amps for the install ?
@fastquickaudio58909 ай бұрын
There is a lot of space for ground near rear seats screws.
@taliapeake892810 ай бұрын
Hello, I have a Mazda 2 Maxx 2015 would this still work?
@fastquickaudio58909 ай бұрын
If your vehicle display looks like this then yes it will work. Please make sure software is up to date to avoid any damage.
@StevenHughes010 ай бұрын
Thanks for that video :)
@fastquickaudio58909 ай бұрын
You are welcome
@mattkenny746011 ай бұрын
Mine is the 07 triton
@fastquickaudio58909 ай бұрын
If it looks like this then go ahead and do it.
@mattkenny746011 ай бұрын
Can you send me link to get that plastic part for the little screen thing
@fastquickaudio589011 ай бұрын
Please use this link for fitting panel with small display kit www.elite-electronics.com.au/Car_Accessories/Facia_Kit/Custom_Kit/Aerpro_FP9013K_Install_Kit_To_Suit_Mitsubishi_Triton_2009-2012_MN?nz=1&gad_source=1&gclid=CjwKCAiAzJOtBhALEiwAtwj8tkA5sGTFYLiBRLAH25zVUCve3_LDTKrhqLB29yg8WhoNpQdyCLbl_BoCy4YQAvD_BwE
@tlaci6011 ай бұрын
last sentences: "cut the red wire!"
@fastquickaudio589011 ай бұрын
??
@BlockchainRocko11 ай бұрын
My question is how do you expect to use equalizer functions on the subs if you passed up the EQ from sub out on the l2ci? Unless the main inputs allow for you to still control your low pass amp? Then it would make sense. Can someone explain??
@lilruemichael405510 ай бұрын
It doesn't work. I tried it that way. Your bass is going through your head unit now and can't be controlled by the EQ. The bass will still keep playing while the EQ volume is down. So your right. You won't be able to control the bass through the eq.
@fastquickaudio58909 ай бұрын
Lc2i has 2 outputs, one for speakers and one for subs. You can install Sub without using EQ. Speakers need EQ because lc2i doesn't provide outputs for individual speaker. ( correct me if I'm wrong).
@robertcruz14634 ай бұрын
Is better use the pre amp for the base, and the full Range from the Lc… thats for a better signal , and the bass is better from the pre amp
@MarkSegree11 ай бұрын
What did you need the lc2i? The clarion accepts speaker level input
@BlockchainRocko11 ай бұрын
He’s connecting subs I assume with a stock unit. The lc2i provides the clearest possible output signal from a stock unit.
@fastquickaudio589011 ай бұрын
correct
@MarkSegree11 ай бұрын
@fastquickaudio5890 I purchased the lc2i. I don't have a dd1 so I'm assuming the linein inputs on the clarion isn't that clean but the rca is ok?
@jsallua11 ай бұрын
Good morning, I wanted to express my appreciation for the excellent explanatory video. Would you be so kind as to recommend a new multimedia radio with wireless Android Auto compatibility, specifically for a 2017 Vitara GLX Allgrip? I would greatly appreciate your guidance.
@fastquickaudio589011 ай бұрын
You can choose Kenwood wireless android auto model.
@jorged93538 ай бұрын
@@fastquickaudio5890 In your opinion, what are the odds that the Vitara steering wheel buttons work with a new head unit?
@rarturoislasv643611 ай бұрын
Hello, great video For Android Auto, the 2018 of this model requires CANBUS ?
@fastquickaudio589011 ай бұрын
Aqua doesn't required can-bus. So follow this video and install. Thanks
@Thizz297911 ай бұрын
Will this setup work on a Memphis LL6SA instead of using LC2i pro
@Cleanserene1219th9 ай бұрын
I don't see why not, the LL6SA and the LC2i pro are essentially the same thing.
@lokomono89 Жыл бұрын
Why “rear out” and not “sub out”?
@fastquickaudio589011 ай бұрын
Sorry can you please elaborate your question!!
@jona0049 Жыл бұрын
Boss I install the sony one for mine , i tapped into the cigarette lighter to get power to the stereo but have no sound! Any idea?
@fastquickaudio589011 ай бұрын
Power has nothing to do with it, that is only to turn stereo ON.If no sound then vehicle may be amplified. Or you are doing something wrong in wiring.