Play film sensor coming on at all different locations
@WulftecInternational22 күн бұрын
Hi Wesley, For immediate assistance, I would suggest you to reach our service team by phone at 1-877-WULFTEC, by email at [email protected] or your local Wulftec distributor. Regards
@wesleymcinnis215524 күн бұрын
Pallet wrapper showing a low film sensor early
@wesleymcinnis215524 күн бұрын
What would cause a fake low film fault
@shawngould4615Күн бұрын
Having the same problem did you ever figure it out?
@CalvinsCorner72Ай бұрын
Need a video on how to time the head
@briansharlow97695 ай бұрын
Wow! You all have no limits!
@billlarkin-zh5nz7 ай бұрын
Thanks for the video will you do a video on making this sensor read black color film
@WulftecInternational6 ай бұрын
Bill, thanks for the comment, When a surface color is difficult to read, most likely when dark or shinny colors or round surfaces are present, we suggest going with a laser type sensor like the WTT12L-B2561 made by Sick. This one performs way better with those challenging surfaces, but on the flip side, the sensor does not have the built-in time delay function that we use for the film overwrap adjustment. To address this lack of adjustability, if needed, based on your control panel type, we can provide you with an external time delay relay and corresponding wiring & connection diagram. Do not hesitate to call in if you would like more details.
@daveklingforth48718 ай бұрын
Thank, you. I do know how to load both in inline and in process TS film dispensers. Moreover, it's a great video to have for a show and tell to customer on how they work.
@lucabianchi75410 ай бұрын
😂 io l'avrei fatto tremare un po' di più !!
@jam12588 Жыл бұрын
The no. 2 carriage on the wrapper I run is not stopping when the reed switch lights up and it wants to cut and clamp at the same time leaving little to no tail.A few months back the no.1 carriage was doing the same thing and a member of maintenance replaced a bad solenoid but during pm the other day a member of Atlantic Pkg was on hand but he would not listen to me and even said it was not supposed to stop and that it was a straight through procedure and that the reed switch did not tell it to stop so all that was done was a few turns of the air cylinder adjusters which just made things more out of sequence.
@franklabs3766 Жыл бұрын
This guy is very handsome
@Awabhamdi Жыл бұрын
Thank you for this video, and if you could make a video for WTS26P sensor teaching procedure, that will be great
@TheWmiller8 Жыл бұрын
What is the life cycle reliably of the clamp?
@WulftecInternational Жыл бұрын
When the clamp is used following the recommended procedures, the life expectancy of the jaws well exceeds the longest warranty period of the machine, which is 5 years on semi-automatics.
@TheWmiller8 Жыл бұрын
Thank you for sharing. i would like to know the estimated cost for our facility. I will look up the website.
@WulftecInternational Жыл бұрын
Don't hesitate to contact your local Sales Representative www.wulftec.com/sales/sales-team.
@skyrace4306 Жыл бұрын
We have a Wulftech wrapper (standard SML) and the build quality and reliability is indeed very good. Documentation is a bit lacking since the actual software features that were delivered did not match the description in the documentation folder, leading to quite a bit of confusion when initially setting the machine up and testing it. Problems are resolved and things work very well.
@deadflatsoldiers Жыл бұрын
I did exactly what the video said and it worked!!! THANK YOU!!!
@joesuiter1610 Жыл бұрын
Looks like a great place to work
@vinnydiazgutti9077 Жыл бұрын
Safety first no gloves🤔
@dbarker792 жыл бұрын
👏👏👏
@seanskelton85112 жыл бұрын
Very well illustrated.
@joew42022 жыл бұрын
I raised the plate and the alarm is still there
@WulftecInternational2 жыл бұрын
Hi Joe, please contact our technical support team at [email protected] or call 1.877.WULFTEC. They will help you to resolve this problem.
@Selenaisalive2 жыл бұрын
Nice attitudes, great Christmas spirit 👏 👍
@dbarker792 жыл бұрын
Another GREAT video tip Wulftec and JLD. Atlantic Pkg techs love u guys 👍🤛👏
@agungrusmandar80642 жыл бұрын
Nice. How to make it 🙏
@joshkidd12872 жыл бұрын
Good info. And for older machines, if it does not have an angled clamp like this, you should get the brackets to change that immediately.
@kitchengadgets12992 жыл бұрын
Nice video
@kitchengadgets12992 жыл бұрын
Nice video
@kitchengadgets12992 жыл бұрын
Nice video
@KristopherLong2 жыл бұрын
Impressive system! I am curious why you used a turntable for direction change though versus a pop up transfer.
@WulftecInternational2 жыл бұрын
Hi Kristopher, We used a turntable instead of a transfer conveyor to ensure that the orientation of the pallet was correct for the forklift to pick up the pallets at the end of the line. Using a transfer conveyor would have required them to unload from the side of the conveyor instead of the end which does not work with their floorplan.
@tonyyayo27883 жыл бұрын
Le service technique wulftecs vous êtes des machines gros shotout a Paul , François, normand , sebastien
@conniecoates64473 жыл бұрын
Brooksdale
@kunalbanerjee62313 жыл бұрын
Excellent !
@bgrindymarcomena12223 жыл бұрын
Awesome
@bgrindymarcomena12223 жыл бұрын
Great Job Wulftec
@yvangagniere15573 жыл бұрын
Wow belle job mon neveu,!
@tonyyayo27884 жыл бұрын
Really helpfull THX for the tips guys
@joserubio97554 жыл бұрын
Congratulations on the celebration of its 30 th anniversary and the success achieved in the world
@dbarker794 жыл бұрын
Well done. Thanks Wulftec!
@saharsahar58344 жыл бұрын
Svp je veux votre adresse email
@joshkidd12875 жыл бұрын
It is a great accomplishment by coming this far. It is also good to know you are expanding soon - the demand for your products and expertise is very high.
@MrFakit8 жыл бұрын
Looks great, a little slow and expensive I bet.
@WulftecInternational8 жыл бұрын
For sure the application of protective corner slows down the production rate. This system is meant to run at 40 loads per hours, but we achieved up to 55 lph on other systems. The robotic arms cost a little more, but they allow to reach greater speed and reliability.
@martinjaviercamacarriaran810010 жыл бұрын
Excelente
@WulftecInternational11 жыл бұрын
This on was design to use postal pallets. For regular pallets you will need a loading ramp (shown at 1:57 of the response video) or you have to install the conveyor in a pit