I'm trying to do the same thing right now 😂 one of my lights stopped working.. It's dim and flickering.

@@matthewnour97 i kinda just yanked it out and surprisingly it didn't snap. its easier than it looks.

Hi there! Sorry for just getting to your comment. Apply caulking around the Mounting Plate and mounting surface with silicone sealant.

Thank you for your reply. Silicone only around the mounting plate where it meets the brick - and no silicone around the light fixture.

Hi Harold! Let me get a hold of our product team and I should have an answer for you soon. Thank you for reaching out about this.

Hi again, are you able to ‘fully insert’ the solar panel plug into the security light? If you're able to fully plug it in, then the light should charge more efficiently and last. If not, please let me know and we will take other course of action to get this fixed for you.

@@KodaBuilt Yes, that’s the first thing that I checked. Unfortunately, it happened 3 times already. It will work for 2 days and on the 3rd day it will not. Then I would have to reset the knobs and it it will work again. I don’t think it’s the solar power supply because the moment you reset the knobs, it will start to work again. So, I don’t really know what’s wrong. I like how the lights are so bright but this problem makes me feel bad about this product.Hope you can help me with this. I bought this at Costco.

@@haroldkingsumaway7228 Ah I see. Understood. Sorry that you are experiencing this issue with this product. This issue has been reported by a small number of customers as I am just finding out. Would you be willing to ship your product back to our headquarters so we can troubleshoot the issue? Meanwhile, we will issue you out a replacement free of charge immediately. Please email [email protected] to begin the process of return / replacement, and please mention that you first reached out via KZbin.

@@KodaBuilt How should I ship it back to you? I don’t want any hassle on this part. But would you recommend returning it to Costco where I bought it?

Hi there! Unfortunately that one isn't in Costco, but we do sell it on our website. You can check it out here: kodabuilt.com/collections/night-lights/products/koda-led-power-failure-nightlight-flashlight-3-pack-lm030164

Unfortunately not, but you can adjust the brightness!

Hi Glen! Thanks for reaching out. Can you confirm whether your floodlight is solar powered or hardwired?

It’s hardwired. I have reached out by email to Koda as well cause I found the owners Manuel

​@@glenpedersen542 ok, our customer service should be able to respond to your email within 1 business day.

Hi there! Please see our online instruction manual on page 5 for further instruction on the motion sensor. You will also find more information how to adjust detection range on page 7. cdn.shopify.com/s/files/1/0014/1534/8284/files/user-manual-koda-46-led-linkable-shop-light-with-motion-sensor-and-remote-lm030008.pdf?v=1608131916

Hey there! Thanks for your inquiry. Our best suggestion is to call into our customer support so they can provide solutions to fix this over the phone. (866) 294-9244 Monday to Saturday 8am to 5pm Pacific Time

@@KodaBuilt I have mine hardwired direct to a breaker would that make it behave differently?

We think it's pretty cool too 😎

Hi there! Thank you for reaching out. We want to provide you the proper service, so we recommend you call into our customer center (real people stationed in here in the US). They can provide a solution for you and walk you through it in full detail. Feel free to give us a call tomorrow during our business hours. (866) 294-9244 Monday to Saturday 8am to 5pm Pacific Time

@@KodaBuilt Thank you for getting back. I had already called and the advice was to use a hand screwdriver.

I had the same thought. Bad design. Great on the main unit, but the solar panel mounting holes are just a joke. I might return mine, and I bought 2.

Hi there - Thank you for bringing this to our attention. These responses have helped us realize there is room for improvement with both the solar panel mount design, and our instructions. The most common way to mount the solar panel is to find your mounting location, use a pencil to mark the four mounting hole locations, remove the solar panel, use a power drill to bore pilot holes into the markings, place the solar panel back (through holes aligned to pilot holes), then use a hand screwdriver to drive the screws. (For non-wood surfaces like concrete, use plastic anchors) We're sorry this has inconvenienced you. You can return the units to Costco, or directly through us: kodabuilt.com/apps/returns - whichever is most convenient.

Hi there! It seems your issue was resolved with our customer service. The back plate (secured with 4 screws) was removed. Please let us know if you have anymore questions in the future. We appreciate your loyalty with us!

@@KodaBuilt Yeah never start something, then go back to it an hour later. thank you

Thank you for your feedback. Happy to hear the video helped!

Hi, I do has same problem as you. Waiting for the solution here 😅😅

Hi there! Thank you for reaching out. Most likely cause is that the switch has gone bad. Contacts in switches can "weld" or stick in the closed position or the switch can just wear out so it doesn't separate the contacts. As a next step, consider buying a new switch, SHUT OFF THE BREAKER, and change the switch and see if that resolves the problem. If you are uncomfortable with electricity, we recommend contacting an electrician or calling our customer service so we can provide further options. (866) 294-9244 Monday to Saturday 8am to 5pm Pacific Time

Hi there! Thank you for reaching out. Most likely cause is that the switch has gone bad. Contacts in switches can "weld" or stick in the closed position or the switch can just wear out so it doesn't separate the contacts. As a next step, consider buying a new switch, SHUT OFF THE BREAKER, and change the switch and see if that resolves the problem. If you are uncomfortable with electricity, we recommend contacting an electrician or calling our customer service so we can provide further options. (866) 294-9244 Monday to Saturday 8am to 5pm Pacific Time

@@KodaBuilt hi, thanks for reaching out. My home is little bit different, I have three wire ( red, black and white). My red color wire actually is hot wire.

We're happy you love the lights! Please leave us a review sometime if you haven't already. We'd love to share your feedback. kodabuilt.com/products/koda-46-led-linkable-shop-light-with-motion-sensor-and-remote-lm030037?variant=39827499057212

Corded

Hi there! The Tower Light is fully a corded plug-in.

​@KodaBuilt how can you use the dewalt battery on it tho? It is advertised that a battery can be attached

Having to plug it in defeats the purpose 😢

@@ahmadsam6460 I plug into my power station.

Same here the edges of the solar panel look to have small but noticeable gaps where the glass meets the plastic so that’s what I’m thinking when it was raining here in the central coast heavily that water got in because it does have a rectangular hole on the other edge of the plastic solar panel that let out water when i tilted more at an angle

@@jorgesk8erdie Hi there! It's unlikely that the solar panel is dead, it might be the battery. Please contact our customer service and we'll be happy to solve this issue for you. (866) 294-9244 Monday to Saturday 8am to 5pm Pacific Time

Hi there! It's unlikely that the solar panel is dead, it might be the battery. Please contact our customer service and we'll be happy to solve this issue for you. (866) 294-9244 Monday to Saturday 8am to 5pm Pacific Time

@@KodaBuilt Thanks for the answer. I'll do it.

Hi there! For the full LM030481 Solar Floodlight installation, please see our installation video here: kzbin.info/www/bejne/nJq6e5-BmM-tbbs You should let your light charge for a full 12 hours before setting up. If you need more information you can view our manual here: cdn.shopify.com/s/files/1/0014/1534/8284/files/user-manual-koda-motion-activated-solar-led-floodlight-lm030481.pdf

Hi there! Please contact our customer service and we'll be happy to remedy this issue for you. (866) 294-9244 Monday to Saturday 8am to 5pm Pacific Time

Hi there! If you are having difficulty following the instruction manual, please contact our customer service and we'll be happy to walk through the installation with you. (866) 294-9244 Monday to Saturday 8am to 5pm Pacific Time

So happy to hear! We're glad you love them.

Hi there! It sounds like you might be looking for the Manual Override function. To do so you will need to follow these steps so you can manually switch the lights on/off. Although, the light will not stay on technically all night. It automatically reverts back to Auto Mode after 6 hours. To enable the manual override function, rotate the motion sensor so the controls face towards the ground. • When power is on, the PIR sensor enters a “warm-up” period for about 40 seconds, then automatically switches into AUTO MODE. • During AUTO MODE, by switching the main switch OFF for about 1 second then ON, the PIR sensor will automatically change into MANUAL MODE from AUTO MODE. In MANUAL MODE, the lights will remain ON, and will NOT be controlled by time duration or ambient light (LUX) levels. The MANUAL MODE will change to AUTO MODE in 6 hours automatically. T

Hi there! Is there anything else on the circuit? The standard for most household circuits are rated either 15 amps or 20 amps. An important note to remember is that circuit breakers can only handle about 80% of their overall amperage. That means a 15-amp circuit breaker can handle around 12-amps and a 20-amp circuit breaker can handle about 16 amps.

Hi there Danny - thank you for your inquiry. This floodlight is only able to be hardwired to a junction box for installation, there is no plug. For further information on set up, please see the user manual for the Motion Activated LED Security Floodlight Installation| LM030022 in the below link: cdn.shopify.com/s/files/1/0014/1534/8284/files/user-manual-koda-motion-activated-led-security-floodlight-lm030022.pdf?v=1597703315

Hi there! We are sorry that you do not find this video helpful. This video is for promotional purposes to showcase the product's benefits. We do however have an Installation video that may be of more help to you! Please see the Installation video here: kzbin.info/www/bejne/nJq6e5-BmM-tbbs

@@KodaBuiltmine seem to stop working not sure why but by looking at the edges of the solar panel they seem to have small gaps and it seemed to have captured water on a rainy day because when I went to lift it and let out water through a small rectangular hole on the outer edge not sure if it’s damaged and now I have to return to Costco

Hi there - Yes you can! You can visit our product page directly here to order: kodabuilt.com/products/koda-security-camera-with-motion-activated-floodlight-lm56176 It is no longer available at Costco.

Hi James! Thank you for reaching out. The sensor may be detecting movement through walls and doors. We suggest to select a smaller motion detection range such as Very Near. If you want the motion sensor completely off: Switch Time Until Dim to OFF, then switch Time Until Off to OFF, and turn the Ambient Light Sensor to OFF and the distance to Very Near. Please let us know if you have any other questions!

Hi there! Just pull hard to take it out. Maybe try to pull from one side first for easier pull out.

Hi there! Unfortunately there is no white cable option. It is technically possible to buy and connect your own white cable, or shorten the current cable. However, doing so will void the warranty and user assumes all responsibility for field modification.

Thank you for the reply. It was helpful. My joists are on 24" centers not 16". Your instructions say to mount on 32" centers. Is it ok to mount into wood at 24"? I don't want to use sheet rock screws.@@KodaBuilt

Hi there! Thank you for your inquiry. Likely a component has shaken loose inside the fixture for some reason which is causing the hum. If the hum is not going away, we can replace it for you if you're under warranty. Would you like any help with that? In regards to the Dimmer: What dimmer system are you using? And how old is the installation? (more than 10 years old?) If you let us know we can look into the particulars. But in general, if you had a dimmer system that used to control regular incandescent and halogen lights, there are sometimes unexpected issues when the older system plays with LED lights.

@@KodaBuilt im using a leviton 6674-PDW. The house is about 18 years old. When i have a regular switch on it there is no problem. I have these lights installed all over my house. Just the 2 i have connected to the dimmer's are buzzing.

Hi there! We're sorry to hear that. Our best recommendation is to mute the video and turn on CC (closed captioning) so you can read the instructions while following along with the video. Hope this helps!

Hi there! For this light you can only switch it to warm white light or natural (cooler toned) white light. If you are looking for a light with blue color, you can check out our Slim 12" LED Ceiling Light with Mood Light. The backlight has multi-color RGB options, including blue!

Hi there - Correct! it is an LED Light so it has built in LED technology for the light bulb.

Hi there! This Outdoor Wall Lantern has a photocell light sensor, so it won't "turn on" during the day unless you cover the light sensor with the provided sensor cap. If the light is not turning on at night, ensure the circuit is switched ON (if tied to a switch inside your house). If you've done all that, try using a different bulb (up to 60W) to rule out if it's a bulb issue. The ground wire would not interfere with the operation of the light.

Hi there - It is possible to hardwire our shop lights to a 120v circuit . However it will void the warranty and we can not provide any recommendations for doing so.

Hi there! Unfortunately the pull chain will not turn off all of the lights at once. But if you have your lights connected to each other and to a wall switch, you can use the wall switch to turn off the lights collectively.

​@@KodaBuiltthis is what I want to do. Any instructions on how to do this? Should I cut the wire before the plug?

Hi there! I'm sorry to hear about your installation headaches. No installation should be that difficult. It sounds like you've tried everything. Best route is to apply for a refund. Please give us a call at 949-209-4931 x 1014 (Mon - Fri 8-5 PST) and we will make this right for you.

@@KodaBuilt I had the same experience - all three were bad and returned to Costco. Paid an electrician $275 to try and get operational. They were bad.

Hi there! Yes, the color temperature will stay the same. The best feature about this light is you are able to choose between white light or natural light. To change the color temperature between the warm white light (2700K) and the natural white light (5000K) or vice versa, flip your light switch off for 1 second, then back on. You need to flip the switch within 5 seconds of being off otherwise the color temperature will remain the same. If that does not work, our Customer Service Team is available to help at [email protected], or call 1-866-294-9244 during regular business hours (Monday through Friday 8:00 am to 5:00 pm PST).

@@KodaBuiltso if my kid flips it back and forth quickly it will cycle through the color temps?

Hi there! We are sorry that your light did not come with its respective remote. Please contact our customer service directly so we can remedy this situation. Customer Service: (866) 294-9244 Available Monday to Saturday 8am to 5pm Pacific Time

Hi there! All KODA Outdoor LED Lanterns (wall or post mount) which come with a dusk-to-dawn photocell sensor will work automatically once the sensor cap is removed. There is also no manual way to turn-off the photocell, unless you cover it with the provided Sensor Cap. Cap darkens the photocell, essentially simulating night.

Happy to have provided the solution!

Agreed.

Hi there! Yes, the Passive Infrared (PIR) sensor also acts as a dusk-to-dawn photosensor. It will turn on at dusk, turn off at dawn and not require manual switching. Just make sure to check your settings! If placed in Test or Manual modes, unit will override dusk-to-dawn for testing in the day. (very easy setting to forget!)

Hi there! Unfortunately this light is not capable of dimming.