Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@abrickwalll 15 күн бұрын
2:06 The narrow part closest to the front snaps out away from the car, dont pull it up or you can snap the tab off.
@SIN1642 22 күн бұрын
Stock height or did you lift it… also what size tires front and back did you use⁉️⁉️ My sister has an 09 is250 rwd and I want to know if 235/45/18 will be fine on the front
@shrutideshmukh5513 25 күн бұрын
Still blank can u have any other solution
@alphathefirstone1222 Ай бұрын
Big props.. that snap ring tip is the biz.. Much respect... !!
@1991DesertVet 2 ай бұрын
I had my son cranking the engine in a 2003 F150 4.6L while I had all 8 injectors unplugged so that it wouldn't start up. We did this because I needed the torque converter drain plug at the bottom of the transmission so I could drain it also when changing the tranny fluid and filter. Could that have messed up the fuel pressure regulator? I'm wondering because now the truck doesnt accelerate like it did before. The onlybother thing I did was take the stock muffler off and replace it with one of the red Cherry Bomb glasspack mufflers.
@pauljavener7342 14 күн бұрын
I would try unhooking the batter for about 20 minutes and hook it back up to reset the computer. It is worth a try.
@1991DesertVet 14 күн бұрын
@pauljavener7342 we found the problem. I had already replaced the fuel pump several months or a year earlier and my daughter always refills the tank when it gets down to a 1/4 tank. It got a lower while I was working on it and cranking it at different points and the gauge got stuck, making me think that it still had fuel. We figured out that it was just empty when we poured gas in it and it cranked and ran fine and has ever since. I felt goofy but relieved at the same time.
@AllAloneAwesome7272 2 ай бұрын
That's lit 🔥
@flyingrv6 2 ай бұрын
This is an old video but you can rent a mini skid steer and you’ll be amazed how much debris you can clear off your land for cheap.
@vinceking7878 3 ай бұрын
Why is the osb not higher?
@alishaparnell8703 3 ай бұрын
I love that ride its not worth it on the first time to ride it but the second. YASŠSS
@kiddykid1792 3 ай бұрын
bro I’ve been on the freakout it is crazy
@TeamRoostericaUSA 4 ай бұрын
Thank you for doing an excellent video. Hopefully this will help a Crank No Start with New Alternator, New Battery, New Fuel Filter but No Pressure on Fuel Rail which it could be the Fuel Pump or Fuel Pressure Regulator but my guess is that it’s the Fuel Pump! 185k miles and it’s never been replaced.
@NicolasKeeton 4 ай бұрын
I realized, I never uploaded the full video. The fix for this was the fuel pump. I'll try to get the video upload this week.
@ObodJhonel 16 күн бұрын
What are the symtoms of that kind of problem?
@andrewbakoledis4021 4 ай бұрын
!!! RELEASE THE PARKING BRAKE FIRST !!! You do NOT want to have to fix or replce that.
@rottin_3669 5 ай бұрын
this is exactly what ive been wanting! well made video too.
@NicolasKeeton 4 ай бұрын
I'm planning to make a second one. I want it higher off the ground for when exiting driveways with steep grade.
@buddahkz9980 5 ай бұрын
Bro got this shit figured out . Can’t wait to start mine soon
@portcityb214 5 ай бұрын
Man GREAT VIDEO showed parts for job and the job PLEASE DROP MORE F-150 HELP I’m replacing everything but the motor at this point just cranks but no start. Previously my truck was cutting of at every light so I parked it now just won’t turn start again
@peted5217 6 ай бұрын
Low Maintenance Malfeasance
@kingofgaming267 6 ай бұрын
Sound like my lawn mower
@NicolasKeeton 6 ай бұрын
I agree! Catalytic converters were removed to be sure they weren’t clogged and causing issues. New exhaust will be welded up, now that the vehicle is running.
@Randomdude21-e 6 ай бұрын
Its 12$ in Norway tho
@RaymondByrne-b8k 6 ай бұрын
Very good.
@3mk3mix21 6 ай бұрын
My phone is redmi when im opening an app after few seconds it will black screen.can u help me sir
@ruffles4154 6 ай бұрын
What tires did you use?
@Sir_Osis 7 ай бұрын
Appreciate you 👍
@NicolasKeeton 7 ай бұрын
No problem!
@sunnyc3966 7 ай бұрын
If I can use this your my Lifesaver🫰❣️🦋💜❤️👏🌺😀😘
@thetrixter8189 7 ай бұрын
🎉 chain
@NicolasKeeton 7 ай бұрын
Thanks!!!
@Frank_Karbo 7 ай бұрын
Theres 4 bolts holds up 5 fingers 😂
@NicolasKeeton 7 ай бұрын
Hahaha, didn't even notice it hahahahaha
@chassy1191 7 ай бұрын
Wow you really have great skills! And you’re great with your hands 😊👍🏽
@NicolasKeeton 7 ай бұрын
Thank you!!! I'll be uploading more projects in the future!
@chassy1191 7 ай бұрын
Is it realistic to “pay as I go” with the build?
@NicolasKeeton 7 ай бұрын
If you can get the building to the point of weathered-in, then it is realistic it. Because you can have a place to sleep or store things.
@chassy1191 7 ай бұрын
@@NicolasKeeton looks like I’ll be buying a shed and living in that 🤣😭
@chassy1191 7 ай бұрын
I really want someone to do this for me. I’d like to fit 3 bedrooms into about 800-1000 sqft with water catchment and solar power. I want to do it debt free. How much cash should I save?
@NicolasKeeton 7 ай бұрын
If you were doing it all yourself, maybe it could be done for about $50k for a basic design. When you pay someone to build for you, the cost could easily be $100k-$200k, because you'll be paying a markup on material prices, delivery/gas and labor.
@chassy1191 7 ай бұрын
@@NicolasKeeton I always get hung up on the DIY part because I couldn’t fathom building something this large.
@j.gotsnkrs 8 ай бұрын
Anyone done it with one jack with one axel raised at a time ?
@NicolasKeeton 7 ай бұрын
Yes, plenty of times. I just don't advise it in the video, because someone will watch the video and might attempt with a bad jack. To be on the safer side, put an old wheel or cinder blocks underneath the frame, if you can't get jack stands. Just something strong enough to hold the car, if the jack fails. Which is rare, but does happen for emergency jacks or not maintained hydraulic jacks.
@Notc6le 8 ай бұрын
Changed both of my tail lights out thanks to you showing me out to take it out 😂 30 minute job
@NicolasKeeton 7 ай бұрын
Glad I could help!
@MrTurtlev2 8 ай бұрын
thanks a lot!
@NicolasKeeton 7 ай бұрын
You're welcome!
@Newbgainer 8 ай бұрын
Dont forget the motor if you're constantly being a VQ boi!
@NicolasKeeton 7 ай бұрын
Mine went out at 197K miles.
@EsotericHashira 8 ай бұрын
Does it work?
@NicolasKeeton 8 ай бұрын
Uploaded a new video on the channel talking about the fitment
@jrcicirello 8 ай бұрын
You painted the angle cut because it did not have pressure treatment on it. Do you have any idea how pressure treated lumber gets its name. Did you know when pressure treating wood, the chemicals used are pressured into the inside of the wood. Hence pressure treated. It doesn’t make the wood harder but it is heavier because of the pressure treatment chemicals are infused into the wood.
@NicolasKeeton 8 ай бұрын
There's mix information everywhere from professionals and manufacturers, regarding sealing pressure treated lumber that has been cut. I'd rather spend an extra 5 minutes to paint the ends as an extra-precaution. Thanks for watching the video!
@epictimez5806 9 ай бұрын
I really want to go on that😢😅
@Bruh99783 7 ай бұрын
Trust me it will be Worth it to get over the fear it is my favorite ride ever
@riley1733 7 ай бұрын
Get on it. I finally built up the courage to ride this and I absolutely loved it. One of my favourite rides ever now. It's a blast.
@NicolasKeeton 7 ай бұрын
It's worth it!!!!1
@magalinoriega5156 6 ай бұрын
Fr its worth it
@Dudy99 6 ай бұрын
Does it go upside down the freakout ride and how many degree angle steep
@vlaminggarrulus4785 9 ай бұрын
Software rendering instead of Hardware worked for me.
@NicolasKeeton 7 ай бұрын
Glad to hear that worked for you!
@mccoulombe941 9 ай бұрын
Excellent content for a beginner like me. If you put two seeding potatoes in their how many potatoes can you expect to harvest? Thank you
@NicolasKeeton 7 ай бұрын
It really depends on a lot of factors. I recommend planting as many as possible. I pulled mine too early and they're were only really tiny potato pods. I plan to do another video when it gets cooler here. These days it's 110+ degrees outside
@CherryBombZ28 9 ай бұрын
How thick of metal were you able to weld with this machine?
@NicolasKeeton 7 ай бұрын
Depends on a couple factors, I'd say up to 1/4inch (6mm), no problem. On a single bead it would depend on a couple things like process (MIG vs Stick vs TIG) , welding filler material (Rod type/size, wire type, etc.,.) and Input voltage(120v vs 220v). Lastly, prep is also important. A bevel edge will give better result than a dirty non-prep piece. This welder is mostly for things under 1/4in considering you'll hit duty limits on 120v faster than 220v at higher amperage.
@davidpanama4844 9 ай бұрын
Gracias por la ayuda
@NicolasKeeton 7 ай бұрын
de nada!
@7777kkk2s 11 ай бұрын
Thankkkksssss youuu so much ❤️❤️
@NicolasKeeton 11 ай бұрын
You're welcome!
@sealsnipz7583 Жыл бұрын
How do u do this
@NicolasKeeton 8 ай бұрын
CapCut filter
@pranjalsrivastava14 Жыл бұрын
i am only getting advance option in the setting please help
@Pryda18 11 ай бұрын
Hey! How about, for the other options to appear, first you must close the project (not android studio), then in the main menu, in the 3 dots you go to the Virtual device manager option, run the emulator and enter the configuration as shown in the video and the other options will appear. :')
@calidude5116 Жыл бұрын
Are you planning on digging swales to green the land?
@NicolasKeeton 8 ай бұрын
No plans for swales. Goal is controlled garden areas.
@MoAdel92 Жыл бұрын
Thank you u saved my life
@NicolasKeeton 8 ай бұрын
You’re welcome!
@PabloDoebber Жыл бұрын
Uouuuuu obrigado!
@NicolasKeeton 8 ай бұрын
You’re welcome!
@tayyyslayzzz Жыл бұрын
Yes all those things yes
@sopretty43vr Жыл бұрын
he doesn’t show the main bulb though. does anyone know the size of the main bulb and not just the turn signal please
@NicolasKeeton 7 ай бұрын
Reverse light is 7440
@rimshazulfiqar629 Жыл бұрын
still black 🥺🥺
@SymbolismDude Жыл бұрын
Nice build bro, mind if I ask your specs? like kw of batteries, range, 0-60? Thanks man, want to do something similar to my G
@NicolasKeeton 7 ай бұрын
I was using a test pack for driving around. Since I've made this video, batteries have gotten cheaper and new better motors are on the market. I'm planning to pull this out of storage, switch to a different battery chemistry and motor. Make sure you are subscribed so you can get the notification when I upload new videos related to it.
@gliong666 Жыл бұрын
thx u man