Pioneer PL-400 Resurrected!
12:21
3 ай бұрын
Пікірлер
@MrAcidtrip77
@MrAcidtrip77 3 күн бұрын
Hi, do you remember what is the diameter of the srew that you have used?
@VinylRescue
@VinylRescue 2 күн бұрын
I no longer use that tonearm as I replaced it with a RB300 that I got off eBay. The outer diameter of the screw threads is 1/8 inch. It's about the same size or a smidge smaller than the magnet itself. I believe part of my anti-skate problems were due to the OCC wiring I was using was too stiff for the sensitivity of the tonearm. But, the overall magnet anti-skate is crap IMHO!
@benberry792
@benberry792 10 күн бұрын
KSHE95 St. Louis, MO in the house!!
@rongreen4536
@rongreen4536 12 күн бұрын
I have a SL-D2 with the same pitch problem where is the adjustment screw. I have looked all over the PCB close to the switch and I can't find it. Thanks, Ron
@VinylRescue
@VinylRescue 12 күн бұрын
email me at [email protected] and I'll send you a pic of exactly where to make the adjustment.
@Kris.with.a.K
@Kris.with.a.K 14 күн бұрын
𝗙𝗖𝗨𝗞 𝗬𝗘𝗔𝗛!!!!!!!🎉❤
@phooesnax
@phooesnax 15 күн бұрын
Had 1 years ago. Great unit. Wish I still had it.
@albertmojicajr.-so6uc
@albertmojicajr.-so6uc 15 күн бұрын
Vinyl Rescue - This just edged out the live version of this song and added to a very significant current playlist of mine in progress. Personally, I love vinyl records and nothing else compares. True to that - is - this. Vinyl Rescue. metaltomotown
@Vintageelectronics2296
@Vintageelectronics2296 16 күн бұрын
How do you like these not having any hinges never will buy another Rega I just got me a Technics SL 1200 MK 5 so much better
@VinylRescue
@VinylRescue 16 күн бұрын
@@Vintageelectronics2296 it's no big deal for me as I take the cover off when I'm spinning an album anyway. Every time I looked at a SL-1200 they were high to bid on. Maybe some day 🤔
@Vintageelectronics2296
@Vintageelectronics2296 16 күн бұрын
I removed mine all together and it tracks so much better I don't like Rega I like Fluance so much better Rega is Junk
@VinylRescue
@VinylRescue 16 күн бұрын
@@Vintageelectronics2296 I bought a used RB300 and it works sooooo much better. I've not heard anything bad about Fluance as many have given good reviews. If I had known about them in late 2016 I might have considered buying one instead of my Rega.
@haroldpattyschultz7783
@haroldpattyschultz7783 19 күн бұрын
I just found ya channel and DAMN Love it Got a request can you put Billy Thorpe “Children of the son” Thx in advance and keep it real
@VinylRescue
@VinylRescue 19 күн бұрын
I'd love to spin that into a video, but I don't have that on vinyl. Sorry! 😐
@cristianquiros7704
@cristianquiros7704 20 күн бұрын
Hi man i really like your videos you're the godfather of the technics turntables... Did you put out a fixing anti skating video or something??? Any help will be good i love sl-d2 thanx
@VinylRescue
@VinylRescue 20 күн бұрын
I've made mention and showed in a recent video how I set my anti-skate, but I've not made a video dedicated on how to set it. There are many out there and some disagree on how to set it up. I prefer to get it to float half way in the middle of a blank LP.
@owenlewis666
@owenlewis666 27 күн бұрын
Hi there what record clamp it that please?
@kenmcnutt2
@kenmcnutt2 29 күн бұрын
Love the 80's
@guilhermezalan6129
@guilhermezalan6129 Ай бұрын
Yes, very good. The drums sound different/clear. Very good. You have a good system there.
@Simbaisinheaven
@Simbaisinheaven Ай бұрын
great green text with green background😢
@ashetochishi1200
@ashetochishi1200 Ай бұрын
More please ❤
@deus_ex_felis
@deus_ex_felis Ай бұрын
truly unknown/underated band ❤ they do a great cover of mama weer all crazee now
@romainlavoie1526
@romainlavoie1526 Ай бұрын
Excellent choice ! Queen Of The Reich of one Geoff Tate's better songs on vocals along Take hold of the flame and Silent Lucidity.
@VinylRescue
@VinylRescue Ай бұрын
This a redo of the first needle-drop I did of this song 8 years ago. Enjoy it with a better setup than the crappy Audio-Technica AT-LP120 turntable and AT440MLa cart. Long Live Vinyl!
@TheJoyofVinylRecords
@TheJoyofVinylRecords Ай бұрын
There's my band... great live album as well!
@jonfairway8235
@jonfairway8235 Ай бұрын
corker !!! Thanks
@deus_ex_felis
@deus_ex_felis Ай бұрын
amazing record for 1982 and still holds up superbly, i gotta hear sing me away now
@VinylRescue
@VinylRescue Ай бұрын
It's on my channel: kzbin.info/www/bejne/rJi9gY2MadqSeas
@michaelbujanda8785
@michaelbujanda8785 Ай бұрын
This is my second favorite song from Dawn Patrol!!!! My 1st favorite 😍 ❤️ is Don't Tell Me You Love Me!!!! I especially like that call and response duel lead guitar solo at the end followed by the climatic harmony soloing Jeff Watson and Brad Gillis do!!!! 😊😊😊😊
@ashetochishi1200
@ashetochishi1200 Ай бұрын
Fantastic ❤
@datafabrics5039
@datafabrics5039 Ай бұрын
0:07 / 5:59 Lynyrd Skynyrd - Simple Man
@VinylRescue
@VinylRescue Ай бұрын
@@datafabrics5039 it's on my list for an upcoming video 📸
@LeftJoystick
@LeftJoystick Ай бұрын
This is one of those songs I would skip when I was 18, leave on when I was 24, and cry to when I was 28. 30 now, still one of my fav. rock tracks.
@vibingwithvinyl
@vibingwithvinyl Ай бұрын
Certain songs start to resonate with you as you get older and have more life experience. You get a different perspective on things.
@MichaelZweifel
@MichaelZweifel Ай бұрын
I'm still using SL-Q3 that I got when I was in the Marines on Okinawa, Japan back in 1981.
@VinylRescue
@VinylRescue Ай бұрын
@@MichaelZweifel I was stationed at Kadena AB 1981-82! I sold my stereo off before I went to Germany in 1986.
@MichaelZweifel
@MichaelZweifel Ай бұрын
@@VinylRescue I like watching SR-71 take off.
@VinylRescue
@VinylRescue Ай бұрын
@@MichaelZweifel I was a crew chief on the F-15 Eagles so we got the up close show when they took off at night! Another crew chief I knew made friends with the branch chief for the SR-71 and we all got a up close tour of the Habu. What a jet!
@vbathory3757
@vbathory3757 Ай бұрын
I have the German pressing of Restless and Wild, but I have always wanted to get a copy of the UK press on red vinyl.
@denniswendt6427
@denniswendt6427 Ай бұрын
Bolton should have re-released this single in 1992. After Steel Bars became a top 40 hit. It's just as good!
@marcusbrown1767
@marcusbrown1767 Ай бұрын
I would like to see how you route your cables for the sut and pre amp. I fancy the little bear t11 also, i need to be sure i make the right choice with these two. I dont have soldering skills.so what upgrades shall i miss?
@VinylRescue
@VinylRescue Ай бұрын
I don't have a photo or video available to show you how to connect the SUT, but you can email me and I'll send a short video clip on how it's connected. [email protected] The T11 upgrades I believe are well worth it. It makes it quieter and sound better, especially with the Electro-Harmonix tubes.
@marcusbrown1767
@marcusbrown1767 Ай бұрын
Nothing about a sut upgrade? Why not?
@VinylRescue
@VinylRescue Ай бұрын
What exactly are you asking? Upgrade? These are not meant to be modified to include a SUT if that's what your intending. 🤔 Here's the SUT I bought: www.ebay.com/itm/273414021444
@marcusbrown1767
@marcusbrown1767 Ай бұрын
@VinylRescue I was told today I could use this same sut between the turntable and pre amp. I don't understand which would be grounded? Also the tonearm cable would run to the sut, but not all Jack's on the pre amp would be connected? Something is missing..
@marcusbrown1767
@marcusbrown1767 Ай бұрын
Ok, what about a moving coil addition to this unit? Or sut? I know its possible, but i havent been told how. Thanks.
@VinylRescue
@VinylRescue Ай бұрын
@@marcusbrown1767 I have a step up transformer that I bought off of eBay that works great with it. It goes between the turntable and the preamp.
@marcusbrown1767
@marcusbrown1767 Ай бұрын
@@VinylRescue ok, so patch cable left and right to the sut, then plugged into the pre amp as normal? That's it?
@marcusbrown1767
@marcusbrown1767 Ай бұрын
@@VinylRescue do you have a Pic of the sut you used? Thanks.
@marcusbrown1767
@marcusbrown1767 Ай бұрын
​@VinylRescue this does not answer the question. If the sut accepts the ground and left and right channel, then the pre amp lacks the left and right channel. This does not make sence, and would not work..
@LTDunltd
@LTDunltd Ай бұрын
I commented this over on the older version. Still have to give you thanks for this. "Thank you for this. I'm a big fan of Head East. At one time I had all their albums. Got to see them live at the Starlight Ballroom in Wahoo, Nebraska back in the late 70s"
@VinylRescue
@VinylRescue Ай бұрын
@@LTDunltd I have all their collection mostly on vinyl. My favorite is Head East Live.
@LTDunltd
@LTDunltd Ай бұрын
Thank you for this. I'm a big fan of Head East. At one time I had all their albums. Got to see them live at the Starlight Ballroom in Wahoo, Nebraska back in the late 70s
@SurferScott
@SurferScott Ай бұрын
This was my first concert, it cost 2.92 . Great show and kicked off 100s more bands I'd see, thank you Shooting Star 🤙
@mustangmatt63
@mustangmatt63 Ай бұрын
Have you seen Juniors grades?
@deus_ex_felis
@deus_ex_felis Ай бұрын
and i say rock on...
@ericf1018
@ericf1018 2 ай бұрын
Great insights. I have an SL-D2 that will not hold it's pitch steady. I have, on top of cleaning the contacts of the pitch adjustment wheel, replaced about EVERY radial capacitor on the board. Same problem persists. Any ideas, I'm kind of at a loss now with this one !
@VinylRescue
@VinylRescue 2 ай бұрын
I did find the adjustment holes for the pots on top! If you take the mat off and align one of the two holes on the platter next to the strobe glass you will see the holes for the adjustment pots (look down through the hole). You will need a small flat tipped screwdriver to adjust them. You don't need to take it apart like I did. After working on a few more turntables I found out most of them have a way to adjust the pitch from the top. I hope this helps!
@ashetochishi1200
@ashetochishi1200 2 ай бұрын
I still have the cassette tape-Recovery LIVE, its fantastic ! RIP Jack Russel and thank you for all the beautiful songs.
@TheJoyofVinylRecords
@TheJoyofVinylRecords 2 ай бұрын
RIP Jack
@VinylRescue
@VinylRescue 2 ай бұрын
This was the first song I ever heard from Great White and it was a MTV video back in 1984. I've been a fan ever since. RIP Jack Russell!
@deus_ex_felis
@deus_ex_felis 2 ай бұрын
people forget there was alot more to great white than once bitten twice shy rip jack ❤
@VinylRescue
@VinylRescue 2 ай бұрын
Oh how true! 🎸🎸
@GöranAndersson-k2s
@GöranAndersson-k2s 2 ай бұрын
Just something I noted: the cantilever on the replacement stylus is longer than on the original, therefore it is less suited for use in a T4P arm. Especially if it's a linear tracker, so just be aware of that.
@VinylRescue
@VinylRescue 2 ай бұрын
@@GöranAndersson-k2s I don't have any p-mount tonearms so I'm good.
@trailtimeszr250
@trailtimeszr250 2 ай бұрын
That new arm and wires is sounding great. ❤❤❤
@VinylRescue
@VinylRescue 2 ай бұрын
I'm very happy with it so far. I guess going retro works! 😂
@henrymiecz8566
@henrymiecz8566 2 ай бұрын
I have the original album and the mix is probably the best I've ever heard. It was mixed at sterling sound. Hilarious I got that album for less than 10 bucks mint and it may well be the most hidden gem of all time because of how well that album was mixed.
@ashetochishi1200
@ashetochishi1200 2 ай бұрын
Thank you so much for spinning the vinyl track. There's nothing like vinyl ! This song brings all the the beautiful memories again ❤
@TheJoyofVinylRecords
@TheJoyofVinylRecords 2 ай бұрын
There's my song!
@VinylRescue
@VinylRescue 2 ай бұрын
Yeah , sorry it took me so long! I've been busy fixing one turntable, refurbing another, and upgrading another with other life interruptions. Now that everything is done I can work on more needle-drop videos. 🎸🎸
@deus_ex_felis
@deus_ex_felis 2 ай бұрын
always loved this track ❤
@tsibren
@tsibren 2 ай бұрын
I got an SL-D3 last week, from a collector who has been fixing and refurbishing turntables for 40 years - it's great to see such videos to get a look inside of the Technics. I absolutely love my D3 and sounds fantastic. All the best with yours!
@vinylholicsanonymous3871
@vinylholicsanonymous3871 2 ай бұрын
I did the screw mod with my P1. I put a Nag MP200 on it and needed to adjust. It's an easy, badass mod. Still planning on either buying a P3 or an rb330 and installing it.
@VinylRescue
@VinylRescue 2 ай бұрын
I'm now thinking part of the problem was the wiring I used. It's stiffer than the Cardas wiring and not as flexible and probably caused my anti-skate issues. I would have loved to get the RB330, but the price was way out of my budget since it nearly cost the same as my P2 when I bought it new. 😳
@lionelmcvinyl9027
@lionelmcvinyl9027 2 ай бұрын
👍 Nice