EXPIOWA

Пікірлер

@andrraz Күн бұрын

Did you need the optional mounting plate for this install?

@EXPIOWA 4 сағат бұрын

@@andrraz No. It bolted directly in with zero issues.

@simonsays5979 2 күн бұрын

I have 2 of these, a regular 2 wheel steer, a 4 wheel steer, and my son has one. I put the furitek system in all of them. One was ok but the other 2 cogged really bad. Fortunately furitek has a 30 day money back guarantee so I took them out and returned them and bought 3 of the hobbywing mini 16 and they are amazing. No cogging, smooth throttle response and all the power this little capra needs. I have the hobbywing quicrun fusion 1800 in all of my 10th scale rigs. I don't think I will ever run any other motor. Maybe bump up to the 2300 but the 1800 works great. Plus they are all programmable

@EXPIOWA 4 сағат бұрын

@@simonsays5979 I have three 2300KV motors in various rigs. They are fantastic and have plenty of wheelspeed.

@zackjay71 2 күн бұрын

So this must be why my brand new injora metal shafts spit out a pin within first 2 mins

@EXPIOWA 4 сағат бұрын

@@zackjay71 It likely contributed if they were not phased properly.

@zackjay71 2 күн бұрын

Where do you get the rubber banding

@EXPIOWA 2 күн бұрын

@@zackjay71 Are you referring to the white band near the end of the driveshaft? If so, that is a zip tie. I have also wrapped driveshaft ends with heat shrink tubing in the past.

@zackjay71 2 күн бұрын

@ lol your right. But Im thinking banding the pins in could help with ejection

@zackjay71 2 күн бұрын

@ yeah Ive done the heat shrink on cvds. But the pins would pierce through eventually

@thefreddykilo 3 күн бұрын

How do you get to this area of the lake? Where is it located?

@EXPIOWA 2 күн бұрын

@@thefreddykilo This is a link to the video I made showing people how to get here. This is the west area. kzbin.info/www/bejne/bJ-WZKCKaK6AiNEsi=mOT6PipxYfk5AT0B

@MustardPickles1 7 күн бұрын

what MM link did you use for the 4th link?

@EXPIOWA 5 күн бұрын

The truck comes stock with a 4-link front suspension. I used those. The Portal kit comes with the conversion to make it a hassis mounted servo, panhard bar system.

@johnnyhotshoe1292 17 күн бұрын

Hello! Good day to ya. Here we are after the olympus has been out for around 2 years, and I am glad to have found this video. There's not much info or many olympus builds out there, and I am here to see how you mounted the skid lol😂 Thank you getting me straightened out

@EXPIOWA 16 күн бұрын

@@johnnyhotshoe1292 That one too a minute to figure out. : )

@danweiss1371 25 күн бұрын

I like the idea of the elastic strapping. I ended up finding UV resistant rubber bands. 😃

@richardgoldup6485 29 күн бұрын

Exact video i was looking for thankyou

@StuNod-RC Ай бұрын

I must commend you on your driving lines. So many “KZbinrs” just bomb thru, wheels falling off rocks, diff hanging up, no approach setup, etc… it’s relaxing watching you pick lines and just crawl thru. Thank you, Sir. 😀

@EXPIOWA Ай бұрын

@@StuNod-RC That is probably the best compliment I have had about my driving because it is coming from someone who understands what was happening. Thank you 🙂

@hichamelkhoury7087 Ай бұрын

Late to the party but how did you make these servos work i was told stocj electronics only take 5 wire servos?

@EXPIOWA Ай бұрын

@@hichamelkhoury7087 I ended up using the stock servos after all. Disregard what I said in the video.

@iljarukin5887 Ай бұрын

for esd protection, right ? ... right ? I'm not a fan of thinfoil people.

@EXPIOWA Ай бұрын

@@iljarukin5887 Research what grounding is and what it does before jumping to conclusions. I included a link in the description in case you care to know what it is. If that's tin foil to you, move along. This video wasn't for you.

@iljarukin5887 Ай бұрын

@EXPIOWA I didn't read your description first, but now I looked into it. I agree that a build up of static electricity can happen and may have some negative impact. Still, how often do your hair stand up or you feel a spark discharge after lying on a woll blancket ? Maybe once a week ? To be honest I did not look into the study they are referencing. I'm sceptic already, because they are showing thermal footage to support their claims which has nothing to do with health. They didn't show any data in the video. Also some of their claims are blantly false: * the earths surface isn't charged negatively, especially not because of lightning * radicals do not consume electrons, they have unbound elektrons, so they react violently with almost everything * electrons do not provide energy by themself (as the author claims beeing transferred from the earth to out body), a potential differential i.e. difference in electron density is the actual energy. by grounding this potential is effectively destroyed. that's probably enough arguments for now. I'm not completly refusing the idea, but I find that it's based on questionable explanations and the effects are minor at best.

@tony4metallicaify Ай бұрын

I bought my redcat gen 7 like 6 years ago so me and my son can play together I have had short course trucks but this was my first crawler, I absolutely love it, The mods never end!

@EXPIOWA Ай бұрын

@@tony4metallicaify With the right mods it is great! Keep having fun with it.

@Whaleriy Ай бұрын

Very well fitted fenders👍 Good job

@richardcranium5393 Ай бұрын

Never went brushless eh?

@EXPIOWA Ай бұрын

@@richardcranium5393 Never will on this machine either. Its not worth it. I have plenty of others that I have.

@EMDRONES Ай бұрын

GT1 body’s clips on hard since they are extended out

@User_1dashzero 2 ай бұрын

Hung out there A LOT in my teens. There is another section also, it’s called the witches hut. It’s not something you’re going to find unless you’re with someone who knows where they’re going. It has some nice stream beds and a few spots where there are 6ft banks of sand.

@EXPIOWA 2 ай бұрын

@@User_1dashzero I will message you when I get to go back. Do you have a GPS pin for it?

@User_1dashzero 2 ай бұрын

@ its deleting my comment everytime I post the coordinates lol

@theREAL9er 2 ай бұрын

I dont think the hair dryer nozzle is large enough in area to be a fair test

@EXPIOWA 2 ай бұрын

@@theREAL9er Ok 🙂 I don't think I was using an actual wind tunnel for my toy race car either. ; )

@theREAL9er 2 ай бұрын

@EXPIOWA i still liked it lol

@danweiss1371 2 ай бұрын

That was helpful for a newbie. So for that, I appreciate the work you did thanks. Sounds funny I’m 60 years old!!!! newbie. Lol.

@EXPIOWA 2 ай бұрын

@@danweiss1371 You are welcome. Thanks for the message. : )

@angelikakurowicka7182 2 ай бұрын

Quick question: Did you use the stock pinion from the Capra? thx!

@EXPIOWA 2 ай бұрын

@@angelikakurowicka7182 Yes. It seems to be fine. I was hoping for a little more top end but I don’t want to give up the perfect slow crawl or cause it to run hotter with a bigger gear.

@smb963 3 ай бұрын

thats crazy! im for sure buying more rubbermaid 😀

@anatomiaconnico1636 3 ай бұрын

Sir i have a very similar model, with a very similar problem, i'm not even an USA citizen but you save me, and thanks to you i was able to fix it idk if you will read this, but thank u and i love u ❤

@EXPIOWA 3 ай бұрын

I made it for you. : ) You needed to see it. Thank you for the message. Live Blessed Friend.

@brianbailey1964 3 ай бұрын

Very nice but try with no cover on clipboard see if it go up it

@RichardVoss-f8u 3 ай бұрын

Myrna Center

@dirkschoute3307 3 ай бұрын

I have the Holmes hobbies 380 Revolver V2 2000KV and a AM32 ESC and this system is also very powerful. The ESC have also a grazy low speed control and the motor is a 14 pole with extra magnets for a powerful dragbrake. The torque is amazing from the Revolver. I can't stop the wheels spinning whiteout breaking the axles.

@RockinTrailZ 3 ай бұрын

To loud

@TamraSteffan-q2h 3 ай бұрын

Schulist Green

@DickensEmma-u7r 4 ай бұрын

O'Hara Oval

@ESTADOÉUMAGANGUEIMPOSTOÉROUBO 4 ай бұрын

Did you like this motor? Is it possible to burn the board?

@EXPIOWA 4 ай бұрын

@@ESTADOÉUMAGANGUEIMPOSTOÉROUBO I do like the motor. The MZ414 Electrics can handle it without damage. If you have the older radio that isn't all black it will fry the corresponding board.

@ESTADOÉUMAGANGUEIMPOSTOÉROUBO 4 ай бұрын

Thank you 👍

@WestDesertRc 4 ай бұрын

Which red rock

@EXPIOWA 4 ай бұрын

@@WestDesertRc Lake Red Rock near Pella and Knoxville Iowa

@thefreddykilo Ай бұрын

I just moved to Iowa from Arizona this year and looking for good crawler areas. This place looks awesome! What part of red rock lake is this? Is there a parking lot nearby?

@DurpVonFronz 4 ай бұрын

So not normal lightning.. strange things like this happening all over the world. Some of em are just like wtf is going on..

@EXPIOWA 4 ай бұрын

@@DurpVonFronz It was almost directly overhead and it was silent. That is why I had to get a video. : )

@billkea7224 4 ай бұрын

You should not be moving the wheel that much.

@EXPIOWA 4 ай бұрын

@@billkea7224 I did that to illustrate the method. 🤣

@mikek4288 4 ай бұрын

Mr Kenton, i promised you something a while back and i finally got em. We'll have to find a time in the next coming week to get them to ya

@EXPIOWA 4 ай бұрын

@@mikek4288 I am curious to see what it is. 😃 Let me know when.

@stephennapier7994 4 ай бұрын

Is that a trx4 21 bronco?

@EXPIOWA 4 ай бұрын

@@stephennapier7994 It is a TRX Sport with the Toyota looking truck body.

@TheGuncollector87 5 ай бұрын

What the brand of axle you used

@EXPIOWA 5 ай бұрын

@@TheGuncollector87 They are from an SCX24. I had to fabricate some components to make it play nice with the Enduro.

@TheGuncollector87 5 ай бұрын

@EXPIOWA awesome Seems like the enduro24 isn't easy to modify lol 😆

@EXPIOWA 4 ай бұрын

@@TheGuncollector87 It took a lot. : )

@Lilljoescratch 5 ай бұрын

Well, that helped out a lot thanks

@wilsonbomber9797 5 ай бұрын

Are you the guy I ran into at the soccer fields while I was speed testing my drag slash build

@EXPIOWA 5 ай бұрын

@@wilsonbomber9797 Yes : )

@shawnrichardson118 5 ай бұрын

I break my rigs almost every single time I bring it out normally that’s the end of me making my video 😂😂😂😂😂😂😂

@EXPIOWA 5 ай бұрын

@@shawnrichardson118 I used to except for my TRX. That one never breaks. I think I finally have a mostly bulletproof configuration now.

@shawnrichardson118 5 ай бұрын

I actually did a 3.8 L supercharged conversion to one of these when I was younger. It was a bad little beast. I will be subscribing. I do a lot of 1/24 scale, RC crawling

@EXPIOWA 5 ай бұрын

@@shawnrichardson118 I plan to do a 3800SC swap after I get back to my pilot job. As far as 1/24 goes, I have done so many videos on them that I ran out of things to talk about. They are a lot of fun when the snow is flying outside.

@texavon6168 5 ай бұрын

What cage is that on the Nexx Racing rig?

@EXPIOWA 5 ай бұрын

@@texavon6168 Itnis a Nexx Racing NX-276 Chassis with an Adventure Force body from Wal Mart. It has been converted to lexan panels from the stock metal ones to keep weight down.

@jessehinson7050 5 ай бұрын

Hey buddy appreciate your work on the channel. U have another Redcat Gen7 fan here. Anyways do u have any recommendations for brushed motors? I currently run a Hobbywing QUICRUN 1080 G2 with a CrawlMaster Sport 550(13T). Anyways I was wondering if you recommend any type of motor step up? Thanks in advance

@Stille1970 5 ай бұрын

Man! That fiero looks really nice!! A ground will cause issues for sure.

@EXPIOWA 5 ай бұрын

@@Stille1970 Thank you. That wire must be the main feed for the fusebox. It turned the whole thing off. It is definitely not a garage queen. I don't care that it is old. I like it and drive it all the time.

@Stille1970 5 ай бұрын

@@EXPIOWA I’d drive it to.

@Stille1970 5 ай бұрын

Good crawling again. I love to watch you run the Gen 7

@EXPIOWA 5 ай бұрын

@@Stille1970 Thank you. It gets incriminatally better all the time as I learn new things. It was my first crawler and it is still my favorite.

@Clutchwithhuch 5 ай бұрын

Wat is that

@jessehinson7050 5 ай бұрын

The Gen7 baby!! Heavily modified

@EXPIOWA 5 ай бұрын

@@jessehinson7050 That’s right. 😎🏁 It is one of the baddest Gen 7s on the planet.

@jessehinson7050 5 ай бұрын

@@EXPIOWA I love mine. You have any videos showing your build/setup?

@stevencarter689 5 ай бұрын

Do you have P/N for the white body with optional wing? Or where it can be purchased??

@EXPIOWA 5 ай бұрын

@@stevencarter689 Part Number MZN193. There is one on eBay right now for about $50.

@wingnutbert9685 6 ай бұрын

Skewed reflection of a vehicle/motorcycle/ bicycle head light on the cam lens? Possible spiderweb, drifting down, close to the lens, catching light from the house? There seems to be a jog in the line and it doesn't look like it's quiet projected for a central point, in a consistent arc. Like a beam from a lighthouse would be. Neat mystery.

@EXPIOWA 6 ай бұрын

@@wingnutbert9685 I forgot I even posted that. Lol

@wingnutbert9685 6 ай бұрын

@@EXPIOWA Need to get Scully and Mulder on it..... LOL!

@duard8652 6 ай бұрын

Nice idea! Does it cause binding when maximally compressed?

@EXPIOWA 6 ай бұрын

@@duard8652 None at all. It doesn’t compress much. Even if it did the foam plug is easily compressed as well.

@GeezerGramps 6 ай бұрын

Good idea thanks for sharing

@tyhtran07 6 ай бұрын

it's capacitor not resistor

Ең жақсы KZbin

Пікірлер