Пікірлер
@joslinnick 3 күн бұрын
What does it cost to do a Mega Kraton 12S conversion?
@CommanderAstigRC 3 күн бұрын
@@joslinnick there are a couple of options on their site. m2cracing.net/shop/shop.php#!/8S-KRATON/c/136127903
@mikehaberski4596 3 күн бұрын
This thing looks awsome bro so your making cf pallels for it👍 for personal use only or are u willing to part with any i would like to come up with something like this for an xmax this is probly short but maybe looks like would easyly modded
@edsheldahl276 13 күн бұрын
I running the sensored Hobbywing max 6 g2 and Hobbystar 4282 2150kv that is not sensored and only run a 14 tooth pinion but it seems to cog or something a little bit right when I first hit the trigger how does your not do that when i'm basically running the same setup just smaller pinion? Any help would be greatly appreciated
@aussiedigger1441 16 күн бұрын
The ones shipped to Australia don't have the neck strap but it does come with locking grooves on the wheel nuts. For the value of this buggy i can't believe there is hobbywing rebranded electronics! I only use hobbywing in rc helicopter and planes.
@CommanderAstigRC 15 күн бұрын
Great value for a budget friendly rig. Gotta Love it!
@josephalbrigo4344 19 күн бұрын
Have you had any durability issues with that kagama? You really send it lol
@CommanderAstigRC 19 күн бұрын
@@josephalbrigo4344 minimal considering the abuse I put it through 😁. I upgraded what I broke. It's an animal of a truck.💪💪
@josephalbrigo4344 19 күн бұрын
@CommanderAstigRC great to hear! How would you compare its durability to the arrma 6s line's? I've heard the a arms are a weak point on them and that is one if the key things pushing me towards a kagama
@CommanderAstigRC 19 күн бұрын
@@josephalbrigo4344 stronger 💪 IMHO brother.
@josephalbrigo4344 19 күн бұрын
@@CommanderAstigRC arrmas stronger?
@CommanderAstigRC 19 күн бұрын
@josephalbrigo4344 kagama arms are stronger 💪 based on my experience so far.
@MOTORR70 20 күн бұрын
hi man what battery do you use on the xb6?😮
@CommanderAstigRC 20 күн бұрын
@@MOTORR70 Ovonic 5300mah 6s battery.
@conradmaceo 21 күн бұрын
That really is one thick arms! Man! And really don’t think anyone was wondering why you used the stock body!🤦🏽♂️🤷🏽♂️
@CommanderAstigRC 19 күн бұрын
I appreciate you stopping by brother. This truck is tougher than people think.
@jimmypmalibu007 22 күн бұрын
I have just bought a arrma 8s with crusher chassis but struggle ro find info about it but was swapping some bits round and found it is longer??? And rear driveshaft is not std length??
@CommanderAstigRC 19 күн бұрын
You must be talking about the mega Outcast?🤔. Yes it's a bit longer and I believe M2C includes the center shaft in the kit.
@jimmypmalibu007 19 күн бұрын
So it was a 2nd hand 5th scale outcast. Set up with the crusher m2c chassis. I have a stock outcast also I was going to swap chassis as mine is in better condition so was going to keep the chassis so mine was a better package but yeah noticed drive shaft was longer on new one. Did end up finding kit for sale and did come with driveshaft as you say. Mine is similar set up with Max5. Not sure what gearing to go with as both are different but will figure that out I guess :)
@nickhathaway4617 26 күн бұрын
NO LOL hobao best underrated RC cars out there by far
@tonytravers5122 26 күн бұрын
Do the stock electronics work well ? And is the servo 7.4 v or do you have to program that setting with the card ? And can the stock reciever take that voltage …..many thanks
@CommanderAstigRC 26 күн бұрын
The electronics are adequate for the stock gearing. But it's slow for me. I believe ESC is on 7.4v. Yes the receiver can handle it.
@tonytravers5122 26 күн бұрын
@ please could you give me a esc and motor combo i feel a max6 but unsure of the motor size and kv …many thanks
@seraphinterraz9841 Ай бұрын
13 tooth Pinion, correct?
@CommanderAstigRC Ай бұрын
@@seraphinterraz9841 I never Ron 13 tooth pinion on any of my cars. I would say at least 17 or 18
@gamedogrc Ай бұрын
great vid & bash bro. you earned a sub.
@CommanderAstigRC Ай бұрын
Thanks brother always appreciate it 🙏
@gamedogrc Ай бұрын
bro you launching that thing like 30 ft in the air. thanks for guys like you i dont have to drive mine extreme like this. lmao
@CommanderAstigRC Ай бұрын
I appreciate your time watching brother. This sucker can take a beat down for sure LoL 🤣.
@gamedogrc Ай бұрын
@@CommanderAstigRC yea i just replaced my front left driveshaft last night. I dont know how it broke.
@shawnscott9704 Ай бұрын
You’re back to the 6S backflips. Better than the prolines with the m2C cores on this rig?
@CommanderAstigRC Ай бұрын
Yes. I somehow always find myself circling back to using BF tires. It's my favorite bashing tire. Proline is good but they get unbalanced and make my cars run a little shaky.
@shawnscott9704 Ай бұрын
That’s a basher body? Which is that one? Looks like fits well overall actually.
@CommanderAstigRC Ай бұрын
@@shawnscott9704 that's an unbreakable hpi savage XL body
@shawnscott9704 Ай бұрын
@ looks good!!!
@robertbeale7679 Ай бұрын
Been using wfo's gears in my x-maxx for a while now,no one can tell me there's a better rc car than the x-maxx with these gears
@CommanderAstigRC Ай бұрын
WFO gears are great. Vitavon took it even further with their supported shaft. Mod1.5 gears are just awesome upgrades hands down brother. Happy bashing!!😁💪🔥
@robertbeale7679 Ай бұрын
@CommanderAstigRC I was looking at vitavon 1.5 gears,they just don't seem to be as well made..I could be very wrong though..ive got 25p 35s on 1100kv Castle creations motor with xlx2 esc...things nuts,want to try some different sized gears to run a bit cooler🤔
@shawnscott9704 Ай бұрын
6 or 8S man? What tires you running now on the Jack?
@CommanderAstigRC Ай бұрын
@@shawnscott9704 8s system on 6s
@shawnscott9704 Ай бұрын
@ like a max6g2 and 1650? What tires, BF LPs or the 6S backflips?
@CommanderAstigRC Ай бұрын
6s BF
@Upstate_RCs Ай бұрын
I’ve gotta learn fronties now that I have a spot that gets me some crazy air!🚀🤘 wicked vid man! Love both of my XL rigs
@richduperbash2966 Ай бұрын
Killer rip Brother Chris 🍻. Great to see you back out my friend 🚀🚀. The Hobbystar 4082 looks awesome in her. Curious if your old dirt jump park is still available 🤔. Miss seeing you send it off those fat gap jumps. Hope all is well my friend 😎💪👊👊
@CommanderAstigRC Ай бұрын
Thanks so very much brother Rich. Felt awesome to back out there for sure 😁. Can't beat the hobbystar motor. I love em!! 😍. The old dirt park expanded and there are tons of potential for big sends 😁. Hoping to get back there. The community I'm in is building a massive skatepark 5 min walk from me. I'm pumped for that as well.
@edsheldahl276 Ай бұрын
Are your m2c carbon fiber shock tower holding up well? and are you using m2c shock stand offs?
@CommanderAstigRC Ай бұрын
Yes. I'm running M2C stand offs. CF towers have been solid for me. I appreciate your time watching.
@edsheldahl276 Ай бұрын
@CommanderAstigRC Thank you
@edsheldahl276 Ай бұрын
@CommanderAstigRC lasts question at least for today 🙃 are you running upgraded hing pinion blocks
@m2cracing168 Ай бұрын
AWESOME BASH!!! Thanks for punishing the parts!!!!
@CommanderAstigRC Ай бұрын
Thanks M2C! I Always appreciate your parts. Jackhammr ftw!!
@rcbigsmall5810 Ай бұрын
sweet you make jumping look so easy
@CommanderAstigRC Ай бұрын
@@rcbigsmall5810 thanks so very much. I appreciate your time watching
@GreatLakesRC Ай бұрын
Good to see the Jackhammr out there Chris! 🚀🚀 Bummer on the ESC, I had the same thing happen on my MMX8S
@CommanderAstigRC Ай бұрын
Thanks so much brother Aaron. It was hella fun till it lasted LoL 🤣. It'll probably end up swapping it out with max6 g2 ESC.
@Mzrc767 Ай бұрын
What a beast! I’m impressed with how you hit the ramp full speed like that from the side angle. How do you do that? Any tips?
@CommanderAstigRC Ай бұрын
@@Mzrc767 I appreciate your time watching brother. It takes a little bit of practice for sure. A lot of it is timing 🙂.
@jasonmartin1332 Ай бұрын
What battery tray system are you using? Recently built a jackhammer myself and used the Arrma tray they recommended but not as happy with it. Any other options that line up you know of?
@CommanderAstigRC Ай бұрын
@@jasonmartin1332 stock battery tray.
@Havingoneofthosedays- Ай бұрын
That thing rips!
@CommanderAstigRC Ай бұрын
@@Havingoneofthosedays- Thanks so much brother I appreciate your time watching.
@finku907 Ай бұрын
Jackhammr is such a mad mobile! How far do think you were getting it out there?
@CommanderAstigRC Ай бұрын
@@finku907 I appreciate your time watching bro. I'm enjoying this truck so much. Good question, but I never bothered to measure when I'm having too much Fun 😁
@jagergerg9771 Ай бұрын
Do you set up the ramp by yourself? How transport it just curious I never see a truck or anything big enough in the parking lot. It definitely is a little ripper
@CommanderAstigRC Ай бұрын
@@jagergerg9771 I appreciate your time watching brother. Yes transport and setup. It's doable 😁.
@edsheldahl276 Ай бұрын
Ordering my roller at the end of the week. Any heat issues with this setup?
@CommanderAstigRC Ай бұрын
@@edsheldahl276 I appreciate your time watching. It's awesome rig for sure. Zero heat issues so far. This combo is stupid fast.
@edsheldahl276 Ай бұрын
@CommanderAstigRC So I believe I heard you are running a 17 tooth pinion but don't plan on sending it quite as extremely as you do 🙂 do you think starting out with a little bit smaller pinion would be better? Also heard your running 30k rear 500k middle and 50-60k front is that working well? And overall are the diffs holding up well with the extra power? Thank you for your feedback 🙂
@CommanderAstigRC Ай бұрын
@@edsheldahl276 yes I would start with a 15t or even stock pinion 13t I believe. Corally trucks are FAST straight out of the box. My diff setup works awesome for my driving style. I'd recommend stock first then move up. I never had any gear issues with any of my Corally trucks ever so far🤞🤞🤞🤞🤞😁. They're stronger than arrma IMHO.
@edsheldahl276 Ай бұрын
@CommanderAstigRC Thank You
@edsheldahl276 Ай бұрын
@CommanderAstigRC What are your thoughts with the Hobbystar 4282 1780kv and max6 g2 instead of the 2150kv? Some say the 2150 is going to get hot and debating between the two. Ordered my corally Asuga roller today so the build will start soon 🙂 I've built a few cars and trucks but trying to take some of the learning curve out of this one with the advice from others
@Citizendefenseindustry 2 ай бұрын
This just seems like a ton of weight and a ton of breakages, the video captured perfectly exactly what a session would look like with this setup.
@CommanderAstigRC 2 ай бұрын
@@Citizendefenseindustry I appreciate your time watching. Agree 💯. Gotta land on all fours every big send. One awkward landing something can definitely go 😁. A bit of skill is needed I guess Lol 🤣
@richardbrown9138 2 ай бұрын
Very nice! Thank you and God bless!
@CommanderAstigRC 2 ай бұрын
I appreciate your time watching.
@richardbrown9138 2 ай бұрын
@@CommanderAstigRC Thank you and God bless!
@GreatLakesRC 2 ай бұрын
Good to see you out bashing Chris! That tower to tower looks nice 👌
@CommanderAstigRC 2 ай бұрын
@@GreatLakesRC thanks so much brother Aaron. It felt awesome to be back out for sure 😁
@richduperbash2966 2 ай бұрын
Wicked bash Brother Chris 😱!!! Definitely been a minute. The Asuga looks epic with the upgrades. Center brace looks perfect 👌. She was flying killer Bro. Miss seeing your old pump track spot from way back. Glad you're dabbling with other RC stuff too. Hope all is well my friend 🍻😎💪👊👊
@CommanderAstigRC 2 ай бұрын
@@richduperbash2966 thanks so much dear brother. Always appreciate your time watching. It felt wonderful to be back doing my first Love again. Asuga is a tank now after finding the fix for those nagging issues Lol 🤣. Massive skatepark is in development five minutes from home it's gonna be killer 😍😁. Been enjoying the mini crawlers 😁. It should keep me busy through the winter. So glad our brother Aldo made it though the storm 🙏😍. You guys keep me going and enjoying RC life. See you in the chat room 😁✌️.
@richduperbash2966 2 ай бұрын
Massive skatepark 😱. That caught my attention Brother 👀. Game on when it's done and ready 🍻🚀🚀
@shawnscott9704 2 ай бұрын
I’m also suprised you fit a max 6G2 ESC in it wow!
@CommanderAstigRC 2 ай бұрын
Max6 g2 fit well and a killer combo with the new hobbystar motor.
@shawnscott9704 2 ай бұрын
@@CommanderAstigRC nice so motor of course does not run sensored to esc correct? What pinion with that motor?
@shawnscott9704 2 ай бұрын
@@CommanderAstigRC I looked around in video you say 1000kv. In the HS 4282 V2 motor I only see 1450kv, 1600kv, 1780kv and 2150kv
@CommanderAstigRC 2 ай бұрын
@@shawnscott9704 sensorless.
@CommanderAstigRC 2 ай бұрын
@@shawnscott9704 I misspoke on the kv. It's 2150kv brother.
@shawnscott9704 2 ай бұрын
Curious why the extenders? Are they 5mm? The skeeters work without so just asking. Otherwise great bash the Asuga is a good ripper.
@CommanderAstigRC 2 ай бұрын
Thanks brother. Yes +5 hex extenders for extra stability. I'm totally loving this truck right now
@shawnscott9704 2 ай бұрын
@@CommanderAstigRC nice thanks for response!
@m2cracing168 2 ай бұрын
AWESOME BASH!! Huge air! Great to see you back in the saddle!!!!
@CommanderAstigRC 2 ай бұрын
@@m2cracing168 Thank You M2C!! Been a minute for sure LoL 🤣. It was a blast ! Super pumped to be back out and enjoying RC again 😁
@blacksheeprc8113 2 ай бұрын
Nice bash can't wait to get mine back out need front diff
@CommanderAstigRC 2 ай бұрын
What's up brother? Appreciate your time watching man. Hope you'll get back out there with yours soon brother. I'm hella enjoying mine right now.
@CptAngelKGaming 2 ай бұрын
Finally someone running it on proper terrain! Best video of the truck out there by far! Can you make a new video with it if you still have it? Nice!
@CommanderAstigRC 2 ай бұрын
@@CptAngelKGaming thanks. I appreciate you stopping by. Yes I still have the truck. Will do for sure!!😁
@CptAngelKGaming 2 ай бұрын
@@CommanderAstigRC Cool can't wait! :D
@LarryDavis-r7j 2 ай бұрын
Davis James White Michael Martinez Kimberly
@johnnymckissick2735 2 ай бұрын
Do the shafts move smooth inside the seals? Or is it tight??
@CommanderAstigRC 2 ай бұрын
@@johnnymckissick2735 yes it does without any issues.
@seraphinterraz9841 2 ай бұрын
Which Pinion 19 tooth pinion or 17 tooth Pinion?
@CommanderAstigRC 2 ай бұрын
17t
@seraphinterraz9841 2 ай бұрын
@@CommanderAstigRCThanks👌🙏✅
@philpowell1162 2 ай бұрын
I hav broken upper front arm as well.
@CommanderAstigRC 2 ай бұрын
I found the upper arms and t2t brace to be weak. I looped a heavy duty zip tie to reinforce those arms.
@philpowell1162 2 ай бұрын
@CommanderAstigRC OK. I love my Asuga. but I hav noticed that some of plastic parts can be defective ! I have had my Asuga since start of the year. Also front shock screws break easily! I have broken shock screws 5 times !
@shawnscott9704 2 ай бұрын
Damn! That’s BIG air for that big girl!!!
@nathancunningham8717 2 ай бұрын
How's that BQ CF esc plate, it looks huge for my Typhon TLR. I'm looking for CF esc plate for my Max8 G2s but that plate looks way larger than I need.
@CommanderAstigRC 2 ай бұрын
@@nathancunningham8717 it should work fine. They're designed for 6s lineup.
@AmeliaJonas-b3z 2 ай бұрын
Sedrick Mountain
@alantaylor353 2 ай бұрын
Very very cool.!! I'm thinking of doing something similar with my Mojave 4S. I've got the cage from an FTX DR8 which has a similar wheelbase.! Subbed & liked & the very best wishes from Scotland 🏴 🙏 ❤️ 📻 🕹️ 🔋 🚗 🚖 🚕 🚔 🚚 🚙 🚘 🚓 🚒 🚑 🚐 🚎 🚤 🚁 🛩️ 👍 👍 👍
@CommanderAstigRC 2 ай бұрын
@@alantaylor353 hello there. I appreciate you stopping by. Sounds like it'll be a super DOPE build. Enjoy brother.
@gianmarcopattarello6016 2 ай бұрын
Hi, to extend the motor cables what diameter of cable did you use, and how much AWG?
@CommanderAstigRC 2 ай бұрын
@@gianmarcopattarello6016 I appreciate your time watching. The same size as the motor wire.
@DaltonIvan-h6x 3 ай бұрын
Candace Park
@tonytravers5122 3 ай бұрын
Have you had problem with the driveshafts /dog bones bending ? I’ve upgraded the front and centre middle to scorched titanium ones but I can’t find a better dog bone in the rear …the sste and thin and weak and bend every time
@CommanderAstigRC 3 ай бұрын
@@tonytravers5122 I bent the shafts after a couple of extreme bash. Titanium are great options. I went with their thicker shafts and they seem to be good so far. I gotta get this truck SSTe going soon. I love driving this truck.
@tonytravers5122 3 ай бұрын
Did you bend the rear dog bones or the centre shafts thanks for replying
@CommanderAstigRC 3 ай бұрын
@@tonytravers5122 stock rear yes but not upgraded ones so far.
@tonytravers5122 3 ай бұрын
@@CommanderAstigRC have you a part number of the rear upgraded ones I can’t seem to find them I have the titanium centre from scorched rc but I havnt got the upgraded rear ones which you have many thanks in advance
@CommanderAstigRC 3 ай бұрын
@@tonytravers5122 I don't have a link sorry. hobao sent one out to me a while ago.
@RolandCarter-n7q 3 ай бұрын
Katharina Isle