hello sir. can you please tell me if the keyboard stays untouched for 10minutes or so, if it goes on sleep mode? and if yes, does it return to action pretty fast? thank you! i actually need it always on, no sleep mode.
@lordpaul4133Күн бұрын
After adding the item, how do I remove it?
@BoopoloКүн бұрын
Click the green select tick to unselect and then eat it 😊 Thank you for watching
@MusicMinisterJP72 күн бұрын
Gee, could you do it any faster?!?!?! Smh..
@johna75642 күн бұрын
New subscriber here! I found your channel by watching your review of the philips norelco 5400 shaver. Thanks! Do you live in Ireland? Just curious because you said it’s piping hot. How hot does it get? I live in Wisconsin, USA, and even 80 degrees Fahrenheit is too hot for me! 🥵😅
@Boopolo2 күн бұрын
Thank you very much. I completed my first full marathon 10 days ago. I have been living in The Philippines for the past 14 years. It's not such nice weather back in Ireland, just like Wisconsin.
@ryanwardell99752 күн бұрын
That filter concept is pretty clever!
@Boopolo2 күн бұрын
Yes, it is, and it works too. Thank you for watching
@CryptidHunter_official3 күн бұрын
Awesome thank you
@Boopolo3 күн бұрын
I am glad it was of help to you. Thank you for watching.
@showmak5 күн бұрын
I have it and I am enjoying it everyday. Thank you for the video.
@Boopolo5 күн бұрын
I am glad you like it. Thank you for watching
@ozmobozo9 күн бұрын
I really don't understand why impact drivers don't have clutch systems. I mean clucth is necessary for screwing and drivers are for screwing. So to me it even makes more sense to put clutch on drivers than drills.
@Boopolo5 күн бұрын
Because impact drivers continuously go forward and back to give them an edge over drills. Thank you for watching
@ubalfridoviamonteramos731011 күн бұрын
Podría decirme si estos equipos siguen grabando si se va el fluido eléctrico 🤔
@Boopolo10 күн бұрын
The alarm will go off if it loses power. You should use a UPS if the footage is critical. Thank you for watching
@ubalfridoviamonteramos73108 күн бұрын
@@Boopolo entonces estos equipos no traen baterías para seguir grabando cuando falte el fluido eléctrico, disculpa mi ignorancia, gracias.
@ArneRagnarsson11 күн бұрын
Not many people read the manual. If you read the instructions, the air hose should be on the inside of the arm to best feel the pulse, not on the top like she has.
@Boopolo10 күн бұрын
As everyone can see the air tube is on the inside of my wife's arm in this video as per instructions, and exactly as the diagram on the cuff itself. You must be confused with another video.
@danielsankey878611 күн бұрын
I can't stand vde tools, those are literally the best you can get, NWS 160s are a close second.
@Boopolo10 күн бұрын
In lots of work areas, you would not be allowed to work with non-VDE pliers. Thank you for watching
@christianfox871715 күн бұрын
Is there a way to make the laser measure from the front face of the device instead of the back?
@Boopolo14 күн бұрын
No. I do not know why anyone would wish to do so. Thank you for watching
@peaceandlove423415 күн бұрын
Dude sounds like he had a few shots before he recorded this video.
@Boopolo14 күн бұрын
I wish
@rickh-s341316 күн бұрын
Can I use Bt earbuds to listen to tv ?
@Boopolo14 күн бұрын
It is a transceiver, not a transmitter. Thank you for watching
@Master5150616 күн бұрын
very good video I bought them Kappa
@Boopolo16 күн бұрын
Very good. Enjoy them and stay safe on your bicycle. Thank you for watching
@FMSVoice17 күн бұрын
Hi, thanks for the tip. It worked for the videos but did not work for the shorts. Please help.
@Boopolo16 күн бұрын
I am unable to do so with shorts either. Thank you for watching
@kanekiken-vg2xc18 күн бұрын
My R speaker not working 😢 but when i transfer my L speaker to R socket there still a sound maybe my R speaker is broken waste of money
@Boopolo16 күн бұрын
That is very disappointing. Maybe you strained the wire. Take it apart and check the resistance with a multimeter. Thank you for watching
@winterume21 күн бұрын
was watching your logitech reviews and stumbled upon this video, thank you, ill be getting these.
@Boopolo16 күн бұрын
I hope you enjoy your new speakers. Thank you for watching
@Mfuao21 күн бұрын
I bought some generic plastic tubes, I put the coffee inside and then I put it in a pot in the freezer and that's how I have it stored
@Boopolo16 күн бұрын
I have my coffee delivered a few days after roasting, so I have no need to freeze. It is best to freeze in sealed bags, enough for a few days in each bag. Thank you for watching
@LeeJPryer22 күн бұрын
No audio jack which is essential for gamers, probably why it's budget
@Boopolo16 күн бұрын
I do not think gamers use the audio jack from the monitor. They plug directly into the sound card on their PC. No, it is not a pro gamers monitor. Thank you for watching
@richardfromtoronto23 күн бұрын
If I plug this into my monitors 3.5mm output anything going through hdmi will go to the speakers too right?
@Boopolo16 күн бұрын
I am not sure what hdmi you are referring to. Thank you for watching
@jeannieg758023 күн бұрын
Thank you. Very helpful.
@Boopolo16 күн бұрын
Glad it was helpful! Thank you for watching
@user-zu1px8bj1x24 күн бұрын
I have questions about can i hold it on 95 or 100 celsius ?
@Boopolo23 күн бұрын
You can hold it on up to 95C when you have selected the hold switch on the back. It will maintain that selected temperature. If you wish to heat the water to between 96C -100C you need to turn off the hold feature. I explained in the video
@user-zu1px8bj1x22 күн бұрын
Thank you🙏
@delzworld200727 күн бұрын
I have been using the same Forerunner 30 for well over 4 yrs now. For my purposes it does everything required whilst cycling, recording distance, average speed, time and route. Then uploading the FIT file to Strava. The question is why these Forerunner watches don't seem to want people to know that they can also be used on bikes?
@Boopolo23 күн бұрын
All the forerunner watches now have comprehensive cycling sections. That said, if I was a very serious cyclist, I would use a bike computer like the Edge 540. Thank you for watching
@blakebaumgart825928 күн бұрын
Excellent video Thank you!
@Boopolo28 күн бұрын
Glad it was helpful! Thank you for watching
@PaulM_aka_4c2128 күн бұрын
Thank you for showing double sided printing.
@Boopolo28 күн бұрын
You are so welcome! Thank you for watching
@GWorxOz29 күн бұрын
Your purchase link does not work.
@Boopolo28 күн бұрын
EEEEE is sold in most countries, but maybe not in Australia. Try Swpeet brand. Thank you for watching
@iceking493329 күн бұрын
Nice men keep up the good work 10/10 fit
@Boopolo28 күн бұрын
A little big on me now that I lost some weight, but still wear them with a belt. Thank you for watching
@JAG457Ай бұрын
Swag level 💯. Ima get this shirt
@Boopolo28 күн бұрын
Nice for a party. Thank you for watching
@davidhorvath9276Ай бұрын
Well on my entire wall it is beeping on AC mode. Useful as a tit on my shoulder…
@BoopoloАй бұрын
Did you try to calibrate in AC mode?
@siktunez8910Ай бұрын
the little air valve makes it hard to suck…pause…if you remove it…it gets a lil better but then it can leak
@BoopoloАй бұрын
Yes. Most of the straw bottles are the same due to the small vent hole. If you loosen the cap you can get it quickly too. Thank you for watching. Thank you for watching
@vicpetrishak7705Ай бұрын
I cover my wire ends with electrical conductive grease before crimping my terminal ends in place .
@BoopoloАй бұрын
I know some people use it when connecting terminals, but not on the crimp itself. Thank you for watching
@KeifusMathews3Ай бұрын
Thanks
@BoopoloАй бұрын
You are welcome and thank you for watching
@MackyG1102Ай бұрын
so which is better..heatsink? the 1660 super ventus xs oc or the ZOTAC GeForce GTX 1660 Super with no backplate.
@BoopoloАй бұрын
I doubt there is much difference. You could look up score data. Thank you for watching
@SunilRathnaweera-yg6fwАй бұрын
Thanks u explain it clearly
@BoopoloАй бұрын
You are welcome and I am glad it helped you. Thank you for watching
@smartchaiАй бұрын
💛💛💛💛💛💛💛💛💛
@BoopoloАй бұрын
I am glad you like it. Thank you for watching
@smartchaiАй бұрын
@@Boopolo I absolutely positively LOVE the superb quality of the "YETI Rambler 36 oz Bottle" 👏👍👏👍! I also have the same color ("Alpine Yellow"), btw 😊 !
@BoopoloАй бұрын
Yellow is my favorite color. 😊
@smartchaiАй бұрын
@@Boopolo SAME 😊 !
@MrTrazz09Ай бұрын
you have tried both z407 and z333, which has a better audio quality? this 2 models are my choices..i like the boxy form of the z333 its classic, but downside is cluttery wires, the z 407 has less wires and has bluetooth but more expensive
@BoopoloАй бұрын
I think they both sound similar. The Bluetooth and Remote make the Z207 a better choice for most. Thank you for watching
@rnl9520Ай бұрын
I listened to these in the video and unfortunately, the 4.5 diameter causes a psychoacoustic resonance, which makes the Tweeter a bit woofy and the Woofer a bit tweety
@BoopoloАй бұрын
Thank you for watching
@user-io8sh6yy6wАй бұрын
Thanks...getting one as its the most value on height ( 42.5''-74.8'') and weight (up to 66 lb) combo out there. At 6'3'', I'll appreciate raising it up to 74.8"!
@BoopoloАй бұрын
You are welcome. I am glad it helped. Thank you for watching
@globalmusic-999Ай бұрын
Greattt review! Im buying them rn! Thank you Big bro! 🩵
@BoopoloАй бұрын
I am glad you enjoyed it. Thank you for watching
@bernardmichaud1099Ай бұрын
I purchased this kit on Amazon Canada for a very reasonable price of ~ $55.00 CAD. I adapted it to my Bosh Mr23EVS plunge base router by adding 2 extra holes in the base plate. I made a few experimental bowls and discovered that the very small wood screw that holds the router in place was getting loose as the device was rotating and did not produce accurate circles. I solved the problem by drilling a 4mm hole in the work and using a bolt type screw of 15mm length which gave me a more secure fit and accurate circles. If Milescraft could develop a better way to secure the device other than a 1/2 " wood screw, this jig would be the best router tool on the market.
@BoopoloАй бұрын
Yes. I would think a better way of doing the small one would be better. Maybe something like the big one, where the screw is down tight and the plastic acts as a pivot. Thank you for watching.
@bernardmichaud1099Ай бұрын
@@Boopolo If you use the same hole it cannot be anything but a flat screw, since the part that secures the router would not slide over your part. it has to be flush with the black section. I hope you understand what I mean.
@BoopoloАй бұрын
@bernardmichaud1099 I understand fully. I was merely referring to how Milescraft could improve on the design. For modification, one could put a machine-threaded (M6) flat-topped screw into a threaded barrel dowel on the bottom. That way the the dowel on the bottom would be fixed tight.
@user-lx6fi5zt3jАй бұрын
👍
@renan7290Ай бұрын
Is it possible to work with Bluetooth? any indication of adapter?
@BoopoloАй бұрын
Yes sure. You could use this one: kzbin.info/www/bejne/g2ialqCCfZKklbc Thank you for watching
@christinacapra-greenlaw8370Ай бұрын
Thank you great video! I had no idea there was a “guest mode” 😮
@BoopoloАй бұрын
You are welcome, and thank you for watching
@loveant3dАй бұрын
Very nice review :)
@BoopoloАй бұрын
Thank you very much. I am glad you enjoyed it, and thanks' for watching
@MrNinjahigaАй бұрын
Hello, unfortunately the link for Canada brings me to your amazon page, but I cannot find this product listed. I did a search in your 600 or so posts for "Yihua" and found nothing
@BoopoloАй бұрын
Sorry. I did not put the video up on my Canada Amazon page yet. Regardless, it is the same video as on US page. For the product itself, you could try amzn.to/3R4WJQu Please note that it is an affiliate link. Yihua have a vast amount of different soldering stations, and they are generally good value for money. Thank you for watching
@bmorgan98Ай бұрын
hello from county tyrone i would just like to point out your link for uk does not work and amazon reports page not found.
@BoopoloАй бұрын
Thank you for pointing that out to me. I hope it is working now for you. Thank you for watching
@lukeloopАй бұрын
can i get a power source from my 12 volt cigarette lighter to it and pug into my car stereo?
@BoopoloАй бұрын
I do not see why not. Thank you for watching.
@ImTrynaScrubAdubDubbАй бұрын
Depending on the wattage and voltage of the device, you can risk overwhelming it with the 12 volt charger and blowing it up or burning it out
@lukeloopАй бұрын
@@ImTrynaScrubAdubDubb Of course it would be the correct voltage and amps as required for the device.
@dominik631726 күн бұрын
U done it? How its works?
@lukeloop26 күн бұрын
@@dominik6317 it works
@WowwwzaaaАй бұрын
Does calibrate mean, turn it off and start again on different area?
@BoopoloАй бұрын
I am not sure which calibration you are referring to. For studs just press the calibration on a known point where there is no stud and wait for beep. For electric, please watch again 3:39. We point towards space and calibrate
@WowwwzaaaАй бұрын
@@Boopolo “known point”? how will I know there’s no stud before I even start?
@WowwwzaaaАй бұрын
Ohhh in the open air then calibrate?
@BoopoloАй бұрын
Try knocking on it or just try on a blank piece of plasterboard
@BoopoloАй бұрын
For electric, yes, point at open air as in the video
@G_RAThbunАй бұрын
I am not a real good shape and I use a treadmill for just a fast walk I'm finding no way to do that in programming on this unit is there a way for me to program it so that the speed does not exceed 3 and the uphill does not exceed seven. There should be a setting somewhere to program my own but I don't know how to do that
@BoopoloАй бұрын
Just set it manually to 3mph and 7 degrees. That is what I started out doing. Two weeks ago I did a follow-up video here: kzbin.info/www/bejne/aHmWYWCiqc2Ghdk Thank you for watching.