I have a UPR catch can and it does work on my '18 Challenger Scat Pack. My biggest concern is that catch cans are illegal in California and my car won't pass the smog inspection with a working catch can. Since my catch can has the quick disconnect fittings, is there a male to male fitting where I can connect the two hoses together for the smog inspection? Do you have any other information about how to pass the California smog inspection?
@DK-performance2 күн бұрын
I honestly tried to watch the whole video but the camera man breathing so hard outta his nose was too much for me
@wgterry73ify3 күн бұрын
Where's the welded in sub frame connectors??? You will twist the body and crack the A-pillar.
@ghunt813 күн бұрын
Nothing like taking off a factory stainless exhaust system and replacing it with an aluminized one
@sumdude22474 күн бұрын
Been wondering if I should get a catch can kit for my 2024 frontier SV since it's direct injection, but I get conflicting info as some videos say you don't need one or it will void the nissan warranty or cause issues. Can't decide if I should get one or not.
@regretfulloon43934 күн бұрын
What spoiler is that
@gabeph.88884 күн бұрын
What electric power steering does it have?
@seeunow444 күн бұрын
Thanks for your response!!!
@AADmrstangerbanger5 күн бұрын
Install a Lokar shifter and you will thank me later. The 6r80 unit works perfect for the 10r80 and looks better and gives you select shift and still looks like a stick. Thanks for sharing
@uprproducts5 күн бұрын
We used the Lokar shifter on our 2003 Cobra which we 6R swapped. It's a nice unit.
@AADmrstangerbanger5 күн бұрын
I have the same setup but Maximum suspension all around and with Weld s71 on E85 your in the 10s no problem on this setup. On pump gas 91 and pony wheels on drag radial I was in the mid to low 11s with horrible 2.0 60 foot. Enjoy beautiful job guys.
@uprproducts5 күн бұрын
Thanks for the feedback. Your car sounds cool!
@tedbear60125 күн бұрын
Gauges work all oem?
@uprproducts5 күн бұрын
Yes, it uses the factory gauge cluster with a Ford control pack from Power By The Hour.
@19BOOSTEDGT350STL5 күн бұрын
how can i get a set of baer brakes for my 89 coupe?
@uprproducts5 күн бұрын
Call UPR at 561.588.6630 and we can set you up with a nice Baer Brake package!
@19BOOSTEDGT350STL6 күн бұрын
what a great build!
@uprproducts5 күн бұрын
Thanks for watching!
@Mcisenegger6 күн бұрын
Damn. His breathing!
@sifer59134 күн бұрын
You here for the guy or the car lol😂😂
@seeunow446 күн бұрын
What headers did you use?
@uprproducts5 күн бұрын
These are Kooks 1-3/4" headers. The rest of the exhaust from the collectors back was custom fabricated.
@BigJay9167 күн бұрын
Video came in perfect timing as I'm looking to do a Coyote swap on my 87 coupe. Thanks! 🎉🎉🎉
@uprproducts7 күн бұрын
Awesome! Don't hesitate to ask if you have any tech questions. 🙌
@AADmrstangerbanger5 күн бұрын
check out my page I have complete build log on Lokar shifter with 10r80 and so much amazing info for the swap people dont tell you about.
@MickyMouseLimited13 күн бұрын
Do you have a catch can for Subaru?
@jaybilawchuk222513 күн бұрын
This is the first I hear of this catch can. Is this even necessary. My 17 sierra 6.2 is going on 230,000 miles. Bone stock. Never touched anything other than full maintenance. I don’t get it I guess.
@claudiagamino649917 күн бұрын
What is this for again?? I have a 2014 JKU, what does this do to my motor? How does it help🤔
@wesbilly18 күн бұрын
Does this fit the 2024 SV Titan V8?
@sergiovelasquez654924 күн бұрын
Honestly, Both look awesome
@Spaz_Racing26 күн бұрын
So fresh so clean.
@RiddleStormYT27 күн бұрын
You don't need this if you don't have any turbo's correct???
@shawnstephs172029 күн бұрын
I want to put those on a set of roush l lowering lowring springs will these bring it back to factory height
@mr.selfdestruct1677Ай бұрын
I'm in the middle of doing these set up, what torque setting do you recommend for the upper and lower control arms nuts?
@ytTonyZАй бұрын
DO LOCKTITE THE DRAIN VALVE HANDLE SCREW. Vibration will cause it to back out and fall off, and parts are not available, requiring the purchase of a new valve. Cheers, Tony
@ytTonyZАй бұрын
DO LOCKTITE THE DRAIN VALVE HANDLE SCREW. Vibration will cause it to back out and fall off, and parts are not available, requiring the purchase of a new valve. Cheers, Tony
@toddjohnson7787Ай бұрын
It’s a mixture of oil and gas coming from the crankcase. These are what the “blow by” gasses from your pistons look like in liquid form.
@davidsprauer9443Ай бұрын
Any forced induction should come from the factory with one! Great add💯
@perrymnazjurgensАй бұрын
Today I installed the UPR Catch Can on my 2023 C8 Z51 Corvette (900 miles) - it took 10 minutes, wow, the quality of the Can, bracket, and hoses are of the highest quality. This is my 4th Corvette, even though I don't keep my Corvettes long, I will always know that I'm not destroying my engine, it's the principle behind owning a high performance sports car. Thanks UPR - what you say is what I received - THERE ISN'T AN EQUAL TO YOU!!!
@perrymnazjurgensАй бұрын
2023 C8 Z51 3LT Coupe - 900 miles, installed UPR Catch Can - what an example of great engineering, what high quality Catch Can and Hoses - remarkably simple, 10 minutes installation time - NO ONE CAN BEAT THIS ONE!!! Thanks UPR Perry
@superjavi9820Ай бұрын
Does it matter which way the can is facing when open I see that one side has a hole into the can and the other is going into the filtration system
@stevebussius7887Ай бұрын
The inlet from the PCV will go through the coalescing filter.
@stevebussius7887Ай бұрын
For how to clean the catch can, Check out our how to clean your catch can video. The Explorer ST and the 2.3 ecoboost are very different, so this kit will not work on a 2.3L engine.
@noone5014Ай бұрын
Is it also compatible with the 2.3 ecoboost?
@tam3133Ай бұрын
Did you feel hp gains?
@DDR233Ай бұрын
Where are you fitting your floor jack on the subframe? Honestly?
@stevebussius7887Ай бұрын
We are using a lift and a pole jack. The pole jack can be seen in the video supporting the rear suspension cradle near the control arm mount. This would be much harder to do on the ground with a floor jack and jack stands.
@ronhanish2 ай бұрын
So what does that kit do for the car?
@ronhanish2 ай бұрын
For the orange clips an easier way just use the corner of a flat putty knife, probably need to for both of them at the same time, or a couple thin pieces of sheet metal
@ronhanish2 ай бұрын
Make an H2O hydrogen gas kit..easy fuel savings.boosts mileage by 1/3 rd average
@ronhanish2 ай бұрын
What's it for??
@shawnp42342 ай бұрын
First and Last CATCH CAN I will EVER install on my ST! THE BEST!!!
@775flattop42 ай бұрын
Raise your drain pan about 4 feet and put a hole in the side of the funnel that you can put a socket extension through to unscrew the drain plug. Hold the socket handle uphill so the oil does not run through the hole in the funnel.... Then replace stupid Ford plug with this awesome drain plug!!
@BLACKEDOUTVIK2 ай бұрын
Wonder if i can slap these on the rear of a crown victoria 2011
@stevebussius78872 ай бұрын
We have no data that says it will or will not work on a Crown Victoria.
@uprproducts2 ай бұрын
Shop Door Hinge & Striker Covers for your 15-23 Mustang at UPRproducts.com ❤️ #uprproducts #uprequipped #thechoiceofchampions #upr #mustang
@sraldiris2 ай бұрын
nice!
@ryanford78362 ай бұрын
They are crooked
@Blue04SRT42 ай бұрын
How is the drone? How is it during cylinder deactivation? Looking at this exact exhaust and I’m curious as to your longer term review of it.
@dawsonedge73332 ай бұрын
This year doesn't have the cut off
@fasteddie617Ай бұрын
Drone is not that bad dude. It'll drop a cylinder on the highway while you're cruising. I think people get lost in that. This Ford has a 10-speed transmission, it will always look for a gear as you accelerate. Don't put too much thought into drone.
@rapestud20 күн бұрын
Had a 2015 2.7 XLT, 6'6" bed. I installed resonator version of this exact exhaust. Quiet at idle and S/S activities. Drone at highway is very acceptable. (2024--->truck totaled by hit and run driver. Buying one for next F150👍🥒🥒🥒🥒
@willtowin98642 ай бұрын
I need it for my ford mustang 2020 GT but shipping is really expensive for DUBAI, do you have local supplyer?
@stevebussius78872 ай бұрын
You can ship to a US based shipping forwarder.
@TheObehave1062 ай бұрын
What’s the difference between this one and J&L catch can?
@stevebussius78872 ай бұрын
Many Many differences. Better coalescing filters, braided rubber hoses with high quality check valves, dual valve catch can so it works throughout the rpm range, larger capacity etc.
@TheObehave1062 ай бұрын
Where do you get the colored filter on top
@stevebussius78872 ай бұрын
The caps are available by calling UPR, we do not have them on our website at this time. We have Black, Chrome, Magenta/ pink shown, and blue.