I need to replace only the bottom part is it a lower bumper or valance?
@danielbrewer-i8dКүн бұрын
I need to replace only the bottom part is it a lower bumper or valance?
@Marcodelahuen13 күн бұрын
Muchas Gracias,me ayudó mucho el video.
@Ghost-hk1kc12 күн бұрын
Perfect, thanks for uploading
@lincoln64continental15 күн бұрын
Have you the oem number on the bumper?
@Gh0ulzTY15 күн бұрын
Do you know why it would have not started back up when the car had the same amount of damage but on the Driver side?
@fanzfanzilla16 күн бұрын
Nice!. Thank you.
@BloodofaFool18 күн бұрын
Appreciate it! Just scratched up my passenger fender yesterday. The part isn't cheap so I was going to install it myself. Your video was efficient, to the point, visually reassuring, and so well done. I appreciate you mentioning the screws you didn't have rather than fast forwarding. 😊
@HowItsFixed18 күн бұрын
Glad it helped!
@elink78619 күн бұрын
Thanos ❤❤❤
@USN_Ret-20 күн бұрын
Thank you
@Dokemsy21 күн бұрын
hat about the sensors?
@karenk398623 күн бұрын
How do you replace the slash sheld
@manu2good1125 күн бұрын
Hello, it would be nice if you could list your tools.
@HowItsFixed10 күн бұрын
Hi, Here is the list of tools: - Door upholstery remover (clip remover) - Phillips screwdriver - Phillips screwdriver bit with small wrench - 10 MM nut setter with wrench
@Teresa-zy4zo26 күн бұрын
Thank you!! I tried for an half an hour to install the blades. The directions say to put bracket on blade first and try as I could I couldn't get on the wiper arm. I tried it your way and I was able to get the new wipers on. Thanks. 😊😊
my car got messed up from the right and this definitely helped bc i have ZERO confidence in taking my car apart but thank you ! i have a better look at what am doing now
@HowItsFixedАй бұрын
Glad it helped!
@marynelson4626Ай бұрын
OK, so I know it’s been a little while since you posted this video and it helped me a ton and saved me a lot of money. I was able to replace the bulb, but when I went to put it all back together, I dropped that stupid plastic nut down the inside of the flannel backed cover! Do you have a video on how to take that stupid flannel back cover off so I can get the nut? Or should I just get one at the auto parts store? I just might do that.
@HowItsFixedАй бұрын
Depends on how deep the plastic nut is gone. Try to see if you could squeeze in your arm, hopefully you can find it.... Other option: I think there are two plastic nuts, I guess it should be fine if you can only get one plastic nut tightened just for the time being
@sabrinafelberАй бұрын
Thanks
@Adolfo1330Ай бұрын
Thanks this bumper sucks breaks really easy
@reimelcamacho3454Ай бұрын
where can I buy a replacement bumper?
@jaywilliams4499Ай бұрын
Need one for side finder front passenger side
@Falcon-tf4wwАй бұрын
Thank you for the video. It helped me in replacing my speakers. Thanks
@HowItsFixedАй бұрын
Glad it helped
@alexandrealmeida29322 ай бұрын
Bom trabalho de reparo.
@user-dt6ff3pn5s2 ай бұрын
What sensor is behind the Toyota emblem??
@HowItsFixed2 ай бұрын
This Rav4 had a 360 degree camera. It was the plug for the camera
@briangray76142 ай бұрын
Excellent tutorial! Thanks.
@josephsosa55882 ай бұрын
Yeahhh I’m not doing all that
@HowItsFixed2 ай бұрын
lol
@josephsosa55882 ай бұрын
@@HowItsFixed okay wow! I have a 2020 Nissan versa and the mirror is in a completely different spot but with this video I did it! It took 5 hours but I did it!😊
@nataliaarizpe26862 ай бұрын
Thank you so much I’m going to have to try this by myself. Do you have a list of what tools you used?
@HowItsFixed2 ай бұрын
Thank you for watching Tools: Door upholstery remover 10 MM nutsetter with wrench
@johnobrien60522 ай бұрын
I'm actually doing this today. The center of the grill/bumper feels like there's something holding it. Both sides are free, all the clips are out top and bottom.. How much force does it take to pull off? I don't want to break anything.
@luisaguilar753972 ай бұрын
Amigo, por favor podrías hacer un video acerca de la activación de control crucero en versa versión básica con hardware externo de alliexpres, sub, like, y compartido
@kielseveseverino79412 ай бұрын
Hi friend, how are you? Can you tell me if I get a whole front of the Rav4 model 2018 with all the radiator... Will it fit the 2015 model...change the rav model 15 to model 18
@phoneonly102 ай бұрын
Removing too much now, there is no need to touch the tweeter, that was for a chance to damage it, this video is no bueno
@HowItsFixed2 ай бұрын
Wrong. Taking out any part on the car has the chance to be damage/broken. Not just tweeter. One has to be careful in taking it out properly :)
@GiveAway-ud9jo2 ай бұрын
Hai.. I lost my bumper screw at the bottom inside the tire that you open at 0.40 min... Can I know the size of the screw? I want to buy new one...
@xandrodist46052 ай бұрын
where is the best place to buy a front bumper? I am in need to replace mine
@llamacebu21625 күн бұрын
I'd call junk yard. Civics are pretty popular cars
@ToadalSimplicity2 ай бұрын
Thank you! Very straightforward tutorial. Using this so I can try to clean my condenser coil to improve my ac performance.
@meadow91652 ай бұрын
Thank you! Appears I need clips and screws. I wanted to remove the wrecked bumper (i ran over tire tread and want to replace with a bumper I ordered from a wreck yard . I'm missing my wheel well liners on both fronts and the bottom liner... I bought all.... so I just need screws and clips....
@mikep5092 ай бұрын
Are the screw and tab placements the same on a 2009 corrolla? Im heading to automotive a recycling center to get a new one😂😂
@HowItsFixed2 ай бұрын
I would highly doubt that 🙂
@mikep5092 ай бұрын
@@HowItsFixed ... I'll figure it out , remove one at a time and leave a map 😁
@HowItsFixed2 ай бұрын
@@mikep509 Sounds like a plan 👍
@jmartinicajhcomm72592 ай бұрын
Hello friend, is there a way to install other fog lights, without changing the entire piece?
@HowItsFixed2 ай бұрын
You mean installing a different shape fog light on this RVR?
@edulucero29172 ай бұрын
@@HowItsFixedno, he meant to add fog lights to the original housing you just took off, cuz I have the same idea if there’s a way to add fog lights to this housing?
@joemc84882 ай бұрын
Nice vid...I have a 2017 RDX and need to replace the grill. Is the ILX same as 2017 RDX?? Do I need to pull the whole bumper then remove grill from the back? Thanks in advance for any insight.
@HowItsFixed2 ай бұрын
Most of the process remains same. You might see some extra/different clips or screws. If it has fog lights, then you would need to takeout fog light plugs. And yes, you will need to pull the whole bumper to remove the grill. Hope this helps and thank you for watching this video 🙏
@icefiregalalxy76532 ай бұрын
Thank you man
@brentcolons66213 ай бұрын
Would you know if the 2020 front can fit the 2015?
@HowItsFixed3 ай бұрын
I highly doubt that
@Cpego023 ай бұрын
Do you have to remove the bumper to replace headlight bulb?
@HowItsFixed2 ай бұрын
No, if you are just changing the bulb then you don't need to takeout the complete front bumper However, if you are taking out complete headlight then you can partially takeout the front bumper 🙂
@eduardocornejo29033 ай бұрын
Helpful video. I couldn’t figure how to take the last connection off. If I’m going to force something off I want to make sure I’m taking it off correctly
@cds1623 ай бұрын
Thanks for the video. doesn't seem to hard to do
@greenman3603 ай бұрын
I was hoping it would not involve those bolts I saw. Also while it would be a little less room to work in, you don't have to pull the panel like that. There's a little section of the panel that pulls out with no tools required. At least on my 2022.