Chayness

Пікірлер

@Jrdn44 3 күн бұрын

Is there a trick to taking off the helmet?

@troydaboyzzz 12 күн бұрын

I have same sockets.... It's impossible to get the leds to sit 9 and 3.. id like to know how you did it?

@tygs 13 күн бұрын

whered you get the rear bumper sticker ?

@DeavonBarnettTV 14 күн бұрын

Dude, u for got the most important part. How to actually remove the spark plug

@aussiefurbymogwaifan6621 17 күн бұрын

Ironically I'd seen one of those sonata nlines yesterday, in the same colour. Also they go all out with the start up animation. Also there is a navy blue first gen veloster that aways parks in the same spot every morning not far from where the sonata was parked. (Yes we had velosters in Australia, we got the 2nd gen velos, except for the N, as it was already expensive for hyundai to swap the weird door configuration around for the right side of the road)

@javiergonzalez6920 22 күн бұрын

Do you know what it's the fuse that control the Dome light ( the room interior light )

@Pasha30003 23 күн бұрын

This mod works best on turbo diesel vehicles with full deletes (straight piped). My car now whistles and sounds bad ass

@Thomas-yf1ve 24 күн бұрын

i know this is an old video, but is there anything wrong with just keeping the bottom headlight bolt off entirely? taking off the bumper sounds obnoxious. though i suppose headlights should have to be replaced that often..

@Dom_The_Otaku 25 күн бұрын

I don’t know if this was mentioned, but the version 2 mochi has to be plugged into the usb c cable it came with (at least it did for me) just in case someone is about to discard the cable it came with, probably don’t do that.

@edgu71eg 27 күн бұрын

must have!!!!1

@pitomac5550 Ай бұрын

Need

@JerryCherryPie Ай бұрын

Trying to remove the old diverter. how do you get the sockets between the intercooler and diverter? It won't fit.

@commentmancommentman1658 8 күн бұрын

You have to pull the hose on the top and use the circle part of the a wrench. A socket wont fit there.

@SloppyShotz Ай бұрын

im excited for the build. Im planning myself to get one cheers G

@SolomonFitt Ай бұрын

Elcajon gets hot for sure😅

@georgefernandez2753 Ай бұрын

Have the same light , how do you replace the fours red light inside

@xxsekoxx Ай бұрын

HELP! 2019 Hyundai Veloster. Left turn signal only works sometimes. No flashing in the dash, and doesn't work in the rear when it happens. Flashers work. Replaced socket and bulb, no fix. I cant find which relay it is. Can you offer any help?

@lloydleewen954 Ай бұрын

whats the size of that pipe?

@buddy20708 Ай бұрын

Hey Will those Veloster N calipers fit my 2023 Sonata N?

@haus0fXI Ай бұрын

It’s absolutely beautiful! I really love the White, Black and Red on cars. Excited to see what’s next for this new project car and to see more Veloster content!

@20LEEAndro20 Ай бұрын

Was it easy to put back the splash guard bolt to the front bumpet after installing the splitter since it does take quite of room underneath the car

@Chayness Ай бұрын

I honestly can't remember but I don't recall leaving out anything or having extra pieces.

@20LEEAndro20 Ай бұрын

Also were they you get the bolts for the extra support at the the bottom

@JerryCherryPie Ай бұрын

Has anyone tried the hybrid one that's adjustable? How does it fit?

@Chayness Ай бұрын

This is the hybrid one that's adjustable. It fits tight as you can see. They offer a non adjustable one that I hear fits a little better. If you're talking about the electronic controlled one.... not so sure.

@JerryCherryPie Ай бұрын

@@Chayness I ordered the hybrid one that has 0, 50/50, or 100%. Planning on doing 50/50. Will it fit with the trumpet installed?

@MaxximumRage Ай бұрын

I would like to have seen an indepth video on the cluster as I would like to swap mine out. Can I also swap the mileage over to it? I have a 2014 VT.

@Chayness Ай бұрын

Well my model had the updated cluster so I could never do such a video but people who have done it claim it's as easy as swapping the cluster and adding an additional module that came with the refresh.

@danielwykowski6069 Ай бұрын

Why are you creating so many restrictions in the line, because of blow by with these engines this line should not be restricted.

@Chayness Ай бұрын

I see what you mean but the install was done as specified by the manufacturer.

@dashobie 2 ай бұрын

Love your videos

@Chayness 2 ай бұрын

Thank you!

@TRICKYBYRD 2 ай бұрын

Lol bro all you had to do was go back and forth fighting and loosening the bolts till the fitment was propper... Lol 5 years later

@Chayness 2 ай бұрын

The fitment was fine everywhere but at the ends leading up to the door. Any movement in the opposite direction would have left a gap near the front bumper/grill.

@TRICKYBYRD Ай бұрын

@@Chayness I see. I just mounted mine 2 days ago. I haven't even tried aligning it yet , I was just speaking about something we had done to a friend of mine's It took a while would it worked. Quick question when you were driving down the interstate, and I don't have hood pins in yet which I'm going to get but did your hood jump around a little bit basically did it move at all because I have a giant hood scoop online and then to vents like you have on yours It's a demon hood on a Grand Cherokee It just makes me nervous seeing it bounced a little bit. It's not a lot but it does move not like the factory one never moves

@kreezer010 2 ай бұрын

great video I was about to change my veloster 2019 base tail light to a turbo tail light coz their tail light is awesome like with a lambo inspired led light but now im a little bet skeptic since I might have problems with the error codes. Great video 👍👍

@jamesm.8392 2 ай бұрын

Thanks and Thumbs Up you helped me with some of it but I have a 2024 and things have changed. You should see the insides of the dome ( I see solder and a puter board and 1 chip in the middle ) and maps ( looks like they are glued in). Gotta see it to believe it. I hope someone solves the riddle? Pull the covers off of those and get a look for yourself. Need Hyundai Tech's to help with these. . . .

@BlingMX3 2 ай бұрын

Hey I know this is an old video, but curious if you could post a picture of the type of weather stripping you used, or would suggest

@randychampion2137 2 ай бұрын

Hey bro could do a video how to change the daytime running lights like my turn signals work just the one that goes across the hood of the car

@Megadeth7811 2 ай бұрын

Moral of the story: Fuck California laws

@user-hv4ls6dw3k 2 ай бұрын

Put a K&N intake on my 23 sorento 2.5l turbo and the intake sounds at low rpm are so fckn loud and honestly really annoying. Its awesome when youre getting on it but of you arent its really fckn annoying due to the open air intake design. Buy the aem dont fck with the k&n trust me. Im trying to save you money. Do not buy the k&n system for the kia/hyundai 2.5l turbo engines. Its literally burning $400. The AEM is more enclosed so it should be perfect. Wish i would have bought this instead...

@nickclashez 2 ай бұрын

Need spacers on the rear

@BrokenBoy69-Lover 2 ай бұрын

Just got my injen cold air intake and turbo xs bov. Sounds amazing . Gonna get exhaust next

@brandongopie7737 2 ай бұрын

Is the helmet on the rx-mochi able to fit on the regular mochis and bosozoku mochis or do I have to exclusively buy the stand alone helmet to fit those models