What app were you using to start your car? I have this same issue, same exact car.. smh

What app were you using to start your car? I have this same issue, same exact car.. smh

It is called a wedge that you get your opinion angle sit right with they’ve been around for eons. We used to do that with jacked up 4Wheel drives before we learn how to rotate the spring pads on the housing and Reed.

what you need is independant rear suspension. pull rear IRS out of something at a junkyard, throw it in yours, and you can use a sensible spring & damper arrangement. solid axles and panhard bars and all that bullshit is just not acceptabel anywhere after 1974. buy or fab IRS.

Ken, I don’t know what to tell you. You may need to lift that bed off and examine the entire rear suspension. It looks like your (right)passenger side trailing arm is at a different angle than the (left)driver’s side trailing arm. But it could have been the camera angle. I’m currently refreshing my front suspension on my 69. I’ve completed the rear with new 5 lug axles, disc brakes and 3 inch drop springs. I hope it sits ok when I’m all done.

Is the service covered under the warranty?

Thank you for posting this video, bc my daughters boyfriend has had a heck of a time trying to get someone to fix his car and even mechanics could t figure out what exactly the problem was .. and of course Hyundai wasn’t very helpful

What wheels do you have?

What a difference. Stance is perfect!

Have an Amazon link for the bullet antenna?

Good addition to the truck and the fitment is really coming together now. You'll like the front end even more once you have the steering components and sway bar added on. Hopefully you can get the driveshaft angle straightened out. I know that's frustrating to get one thing done to only be gifted a problem in return. Cheers!

Perfect my man

Bro as cherry as this runs do you ever feel like going the LS route

Bro you are killing it, wicked truck

Pizza! Pizza!! Pizza!!!

Music to my ears

How much oil collect this engine ?

What kind of transmission does it have and how much whp does it make?

Did you ever find out the issue with your car. I have the same issue going on with my 2018 hyundai sonata se model.

I've just used this video to re-assemble a parking brake. Really clear video. thanks heaps.

What fuel cell are you running and what engine size are you running as well

I can hear the engine make a ticking sound i think they put chinese rockers in here

These trucks are now well over 50 years old and still love to put the work in mine and see others put the work in theirs. I love what you've done to yours

Very rarely will I have a mod go smoothly on the first attempt. Always running into something that wasn't expected. For the bolts, I would certainly use the old OEM or go with new grade 8. I even went with grade 8 on things that absolutely didn't need it but the cost difference was so minimal, I wanted the peace of mind. One more step forward! Winter sucks over here but hoping to have a pause in the snow so we can get back to ours soon. Cheers!

Nice truck. I love those old stepsides.........

WooooHooooooo!! Keep em coming!

Hey fellas..I want to share my progress on my suspension on my truck. This video was recorded 2 weeks ago and I am actually way ahead...more videos in the pipeline.

I made a comment on the hydrobooster video you made, can you answer my question please ?

Hey ! Did this conversion with the hydrobooster, but now what do I do with the left over vacuum hose coming from the carb that was for the brake booster ?

Really got a lot from this video. But what about the proud studs showing through from the nuts once the spacers are on. You cant get the wheel flush with the rotor. That would be a fail here in NZ

Is the compressor disconnected?

Your pinion angle doesn’t look too crazy. I’ve noticed anything more than 5 inches of drop on the shortbeds w/ one piece drive shafts it usually requires an open or topless trailing arm cross member for clearance. I helped a buddy with a 6 inch drop replace his. I’ll send ya a message with the part when I get home.

Better go check my 12 bolt now that ya metnion it. Good find

Looking good, sounding good

Looks good..but mark on it with a sharpie before you cut it

Speedway motors sells shims to adjust pinion angle

What cam is that?

American made piece of junk. Should have gotten a Toyota

Think the pinion angles on both sides of the drive shaft should match ideally

Good video. Considering the blue trim myself. Only reason I would go for sel is to get the leather but I think I can keep the cloth clean and hopefully it holds up. Do you feel like the seats are comfortable for long distances?

Snowballed fast.

You’re going to have to adjust your pan hard bar also. I’m not sure exactly in what way but you should research it. I think they are ok up until you drop the rearend past 4 inches.

"While we're in here" is commonly said on our projects. The goal line continues to be moved each time. Continue to take it in stride.

You had me chuckeling when you said one thing leads to another, start with a small upgrade and end up taking it all back down. We've all been there! 😂

what's the torque on a head cylinder?

what is the torque spec on the piston rod? and what type of torque wrench do you use?

Thanks for sharing your doing thanks all

I just hooked all my leds accept the headlights put the led relay in and my turn signals won't work. What did I forget?

Is that some sort of special serpentine set up? Sounds and looks great