I have the same engine and clutch system, but I cant shift into first from a stationary position while at idle unless I'm rolling forward or giving it a lot of throttle. It's like the engine and clutch are always engaged with each other and it won't separate, would you have any insight about this?
@richardstone8615Ай бұрын
Love the KLX content
@anicekidАй бұрын
Im looking for some help um working on an 82 110, but dont know where the mixture screw and idle screw should be, even if it just runs i can get it from there, but cant get it to run. Please help.
@KonnerWordenАй бұрын
Is that happy ramblers?
@marshallk23Ай бұрын
Love all the green!
@2cute2quite44Ай бұрын
Hi this just happened to me was lucky to salvage the head get new replacement for the bolt put all my bike back together it’s not starting I have spark compression fuel running tidy everything gone over still no work to find out how to get it running
@t2d2420Ай бұрын
Would the valves make knocking noise only in 3rd
@CalebDeming-ij6uzАй бұрын
I just purchased on and I’m struggling to find any info on it do you know what size bolt hood the foot shifter pedal on
@Blue_Sweat59Ай бұрын
Do I have to take almost my whole front assembly off?
@builtbykАй бұрын
@user-xp8qu4dh3t I did not not, I just loosened the bolts on the triple tree
@Blue_Sweat59Ай бұрын
@@builtbyk alright thank you
@Alex-yg7ruАй бұрын
My klx 110 bushing completely melted while riding, do you kno the cause
@masontrue1042Ай бұрын
could you post a video on how to clean the yzf600r carbs step by step? i just bought my first one and have no clue.
@Luis-yz1fp2 ай бұрын
My tao tao rhino 250 looks exactly the same. I broke the clutch cable, replaced it and it acted like the clutch would not engage, it died as soon as i put in gear. I assumed a bad clutch, ordered it and replaced, and it is doing the same thing, dies when i pit it in gear. Any suggestions?
@connorwilson80782 ай бұрын
I just tried to doing and the cap was seized , I may or may not have beat the suspension to death with a hammer😅😅😅 I do have new forks now tho and I am happy 😂
@builtbykАй бұрын
@connorwilson8078 lol I would've did the same!
@Topdebatesforyou2 ай бұрын
please post videod about this x6 im also currently working on one and i dont know so mich about it😅
@stephengalvan77222 ай бұрын
How many gears are there
@darider62863 ай бұрын
I got a 929 rr cbr fireblade changed my oil like you did but in da mornings at times id get a lil drop of oil on da floor where you screw back da oil cap tank underneath before refilling shoyld i worry bout it????
@readywerx3 ай бұрын
The headlights are awesome. How was it done? Thanks
@user-xm2om3sq1t3 ай бұрын
Good shi G
@user-hp3le7wd9y3 ай бұрын
😅😂😂😂😂😂😂❤
@jakethesamurai84243 ай бұрын
Same thing happened to me😂
@Christiansmith-gl2sd3 ай бұрын
Waht the rear sprocket size and front
@builtbyk3 ай бұрын
The current set up now is 14 front and 37 or 39 rear, still a bit torquey. I was going to throw a 15 on the front and see what happens
@jamze58523 ай бұрын
are they quieter than stock?
@builtbyk3 ай бұрын
Just a bit, it's more of a refined tone rather than loud. I liked it for what it was tbh
@Smodlee3 ай бұрын
I don’t understand 😂😂 why he’s got a riding boot on to kick that bike over 😂😂😂😅 it’s only a pit bike
@garybrady72453 ай бұрын
I got me one of those I think 40 or 50 piece terminal disconnect tools. It comes with all kinds of different pin removal pokers and all kinds of good little handy keys on it. Even has some round ones that look like a pop machine key or something but yeah best 12 bucks I spent in a while.
@morgankovarik36494 ай бұрын
Lol just flip it around and reuse it good as new.
@fix-it-frank4 ай бұрын
Got to find me one man
@joegarcia73314 ай бұрын
Where you get the 212 at? I was thinking about ordering one off ebay for 900. Is there a lot of modifications that need to be done to install the 212?
@builtbyk4 ай бұрын
From ebay haha, it's not a bad motor. Has some power, I'd just recommend a different carb in the long run, one that comes with can suffice
@chriskuempel10254 ай бұрын
Thanks for the video. How long are the forks? I walk to change the oil in mine as well. They’re 31” long from cap to center of the axel.
@pv24434 ай бұрын
So should I run a 26 or 24?
@pv24434 ай бұрын
I need a jetting chart for a 26 mm carb on the 140
@troyziegler13124 ай бұрын
Cool bike. I think your rear spring is too soft. It's collapsed before you hit the table and it bucks you on the next jump. There was a bit of a kicker that day.
@jdmfl314 ай бұрын
So i also have a 125cc no spark so i bought a 2 coil stator because that what i seen on it kid said it ran then sat. So my new 2 coil stator does not spark . What do i buy. Like should i try a 6 coil stator?
@Lostprovince23192 ай бұрын
Buy an oem stator and harness kit off of amazon should be no more the 50-60 bucks
@LucasSerrano-io6mo5 күн бұрын
@@Lostprovince2319which one?? link i can’t find it
@javierjp3804 ай бұрын
I have the same issue with oil in the exhaust valve cover. How do i correct this?
@mk5slow1732 ай бұрын
its not an issue having oil there as long as when you take it off theres not oil pouring out from where the valve is and leaking your good its a bowl on the bottom of the motor the oil when the motor is off as no way of getting out of that bowl, i just did my valves today no oil in the intake cover only exhaust and my motor has probably only 50-70 hours on it maybe less
@wayne78624 ай бұрын
So if the starter at least attempts to turn over, the kill switch is good? Asking because I got no spark...but the starter works.
@workharder2154 ай бұрын
same with mines idk why mines isnt startin
@wayne78624 ай бұрын
@@workharder215 No expert here but I'll share what I learned from a month of my new Hawk not starting. First, my new **replacement** kill switch was wired backwards at the factory, so off meant run; run meant off. Discovered that totally by accident. Next, watch your wiring in the harness full of wires by the battery. There's a blue & white wire which is an igniter wire that tells the CDI when to fire. Also, check the red and black wire which receives power from the stator and make sure its connected. Hang in there...the biggest lesson I've learned with Hawk ownership is "one step forward, two steps back."
@JackedUpBronco844 ай бұрын
Can u post a link where u got the switch at. I have the same quad that needs one, I can’t find a good match
@vectorbrian24155 ай бұрын
Snap ring pliers
@bluezonedrone5 ай бұрын
I just changed the oil in a MXU 250. I took off the other bolt that is more underneath the quad. A little oil came out but I'm not sure what it is. Gear oil maybe? The manual is not clear and I can't find any info on it.
@np514865 ай бұрын
Those exhausts are hard to come by nowadays, how’d you get them?
@BikerB2155 ай бұрын
I LOVE THAT NINJA LOOKS GOOD
@BikerB2155 ай бұрын
SURPRISED THAT COMPRESSION DIDN'T BREAK YOUR LEG LOL SOUNDS GOOD ID MAKE THAT MONSTER STREET LEGAL
@crazyDIYguy5 ай бұрын
These bikes look amazing, I love the styling. I have four motorcycles right now and I'm seriously contemplating going and buying one of these on marketplace. 😆
@MaxPayneELАй бұрын
I got one for ya send me your email or way to send you pics
@iancampbell60026 ай бұрын
Does this engine have a wire coming out of the bottom case right below the exhaust port on the case? This is the first chinese motor I found that is what I can see so far the same as I have...I can't find any info on mine....mine has no Kickstart..it came out of a 4 wheeler that was shaft drive
@mrfishbulb71876 ай бұрын
Whats the engine code on that quad?
@ichuckspears6 ай бұрын
would love to see a small short on this wiring harness man!!
@builtbyk6 ай бұрын
Sure I can try to get a video of what I did!
@Jxgg117 ай бұрын
The seat had me crying 😂😂
@ethan_enjoys_cooking69657 ай бұрын
Can you post a link for the carb you bought? I have a 160 SSR and would like to get one.
@builtbyk7 ай бұрын
NIBBI Motorcycle Carburetor, PE24mm Flange Carb for 140cc 150cc with Carb Jets, for Dirt Bike Pit Bike ATV Go karts Moped Scooter 2/4 Stroke Engine with 45mm Air Filters a.co/d/hzkJmpQ
@builtbyk7 ай бұрын
If you have a 160. I have a friend who races who had good results with the nibbi 26mm carb
@ethan_enjoys_cooking69657 ай бұрын
Thank you!!
@Adamdub6127 ай бұрын
trade ya for a cr500
@chadcordial80067 ай бұрын
Thought bro just kick stared this thing with a slide on his foot ! I was about to say now way 😂
@builtbyk7 ай бұрын
I honestly want to try it haha, brain says full send. Foot is saying no lol
@patrickmaher40147 ай бұрын
Sounds nice, good job
@jakesizemore58857 ай бұрын
We're you get the clear side cover
@builtbyk7 ай бұрын
It came on the bike when I bought it, but I believe you can find it on Amazon or ebay