You blabber too much and not show the most important stuff - polishing this tiny part.

should i get a kral puncher or a m60?

Without the help video, I would have to retire the gun which was sitting in the drawer for 10 years without action and was not air tight due to bad gasket. It was noted somewhere in the comments that the safety switch (the one on the other side, without the screw) should not be removed. I taped it to the body eventually so it would never ever!!! come off accidentally while disassembling the gun. Mine did. I spent more time reinstalling the spring with tiny ball on top of it than the whole assemble - dissassemble ritual 3 times. Second, the little spring is next to impossible to but back after the gun is assembled which video sadly omitted at the end. I put it back while the gun was still open and then noticed the trajectory arch and travel distance which was needed to align the trigger holes which is just a tiny bit. After the side of the gun is almost attached back, slightly push the part inside in the right direction using flat screwdriver. Takes seconds to align them and finally push the top all the way to close the gun completely. Strangely, my gun is german made but all black, just like my real beretta. Good for practice in the yard without paying hundreds at the range. Once again, FANTASTIC VIDEO AND MUCH APPRECCIATED!

Great video ! I would like to see how you mounted the rail . Thank you and have a nice day .

Hello what power levels can be achieved upper limits

How did you mount a sight to it?

Put the box it sucks and you can't harldy get any air in it

It IS a short barrel smooth bore, So by DESIGN it's a "plinker". No ones gonna hunt with it, Unless they are shooting bedbugs. LOL. It's a FUN GUN. But also a good trainer.

It's not REALLY a "Revolver replica", It IS a revolver! A Co2 powered revolver, with handloaded cartridges, to be sure. But it is a revolver. After the Co2 cylinder is installed and the cartridges are loaded, the "manual of arms" is the SAME as any DA/SA firearm revolver! Great training gun to introduce a "newbie" to "real" revolver shooting, IMHO.

I enjoy taking cheap air guns and seeing what I can do to make them more accurate (trigger, sights and pellet mainly). How did you mount your picatinny rail?

For hunting 25 cal allways have much more energy power more damage.. off course 25 cal is better.. i dont like 22 no to powerful. The only 22 that i have is the gamo magnum 3rd generation thats all

I enjoy mime, yes hard trigger, get used to it, Getting better, can hit dime targets at ten feet. All day. Must of got a good one. With flats, and points.

Stick to head shots got it

Nice review. So the Magna mini takes the sound down by only 4 decibels on the rifle.

I love that pistol I got one brand new in the package right now just waiting to open up on some Saturday or something

Good to see you back bro🎉

Nice concept

Can't even see what you're drawing in the paper?

wow! great work!

I have experimented with magnets in such manor. The problem is that the magnetic field must overcome the momentum of the weight of the magnets wether pushing or pulling. Also stacking 2 like magnets only increases the field by 50%..... But you are thinking. I applaud you for that.

Badass idea and execution. You're now a gunsmith and inventor. Congrats and thanks for the info. I know you're against electronics, but a electro magnetic device similar to what's in rail or coil guns could also be used to accelerate a projectile above the speed of sound theoretically when used with compressed air. I've been dying to tie the ideas together, but ofc it would have to be wrapped ina Faraday or something to survive those extreme cases you listed vs a traditional pcp.

If this is as you claim 100% magnetic propulsion, then why do you still need to fill it with air?

Do you want to replace the hammer spring with a magnet, or the valve return spring? Daystate airguns have some models that have an electric valve.

Freaking sweet brother!

Interesting Steven

Electro magnets installed would be a possibility?

Is the any shop where i can get a spare for this 32:17?, mine got cracked

Why are there so few name brand CO2 bb rifles with a stick mag? I got the TAC 4.5 3 years ago and it's my favourite plinkin rifle under 150 € But I wish Umarex, ASG & the sort made more different rifles like this

Low velocity.

Not good on your Gun Plastic clean the Barrel! Its shaving Nylon in your suppressor cups

So cool Dad! That 350 grain rocked him and like a trooper, He still shoots it. Bad Ass Young Man!

nice one !

These chinese rifles tend to prefer the single ahot tray. The magazine is prone to bending the skirts a little when indexing the next round. I literally just picked one up today so will do some testing

Yup

Nothin' stood a chance of survival 👍🏻🤠✌🏻😂

What makes them Pistol Pellets? Are they extra light for high velocity in short barrels?

Congratulations great shot 👍👍