the black. tape ! he removed it then ainted over it ?
@benjamindelfs27185 ай бұрын
The glory days when we used to spread the walls, not the tile itself and didn’t use any clips. Tiling has changed a lot since this video.
@agent70vids35 ай бұрын
Can I use Davco K10 sovacryl as final coat? I mean, from rough concrete wall finish, skim coat to make the wall smokth then to davco K10 as final coat?
@jingsun623810 ай бұрын
May I ask can the adhesive be used as grout to fill the gap?
@WilliamWallace-hp6ie Жыл бұрын
Doumaje je suis pas parmi vous c ET un bon concours je suis la artist le meilleur carlleur d' Algérie c'est mon Nil et bon courage met amis
@plakey2001 Жыл бұрын
And what about bond breaker (NC silicone) to the joints between the flooring sheets?
@alexanderchuyko4889 Жыл бұрын
It`s too tricky to realize what exactly we have to use as a primer... On the bucket there is only a couple words telling that an appropriate primer from Davco can be used... But, it isn`t specified. No Bunnings team was helpful... And no reinforced fabric or bandages are available at all... Only from Cromelin and Bastion. Can or Can`t wqe use them with Davco- is a big secret :)))
@josephde-zordi7324 Жыл бұрын
what is that special black tape? not well explained in my view.
@dhaka786monir5 Жыл бұрын
Am work Tils
@dhaka786monir5 Жыл бұрын
hi
@pedroribeiro358 Жыл бұрын
Do you have any similar product for outdoor porcelain tiles?
@jonnykrivan6840 Жыл бұрын
as a plumber , just watching you put that membrane around that mixer tap with no tape over it was making me think bad thoughts towards you
@newgatenznz74492 жыл бұрын
that was very interesting AS3958 has some great information about tile installation.
@petergrady88482 жыл бұрын
took my back dont trust as dont work
@susanmessenger69912 жыл бұрын
Where is your safety gear.
@rl48992 жыл бұрын
Fantastic!!!
@bennydeguzman76682 жыл бұрын
What waterproofing product should I use for an underground concrete cistern water tank?
@rameshpersaud71312 жыл бұрын
Nice
@ramamohanaraonamburu49463 жыл бұрын
Sir, was it for bath rooms?
@tee7snow4013 жыл бұрын
never seen duct tape used as reinforcing bandage before
@khakicam54002 жыл бұрын
As he said, it's functioning as bond breaker, and it was cloth tape not duct tape.
@tee7snow4012 жыл бұрын
@@khakicam5400 cloth tape the one they sell at bunnings in the paint aisle?
@jonnykrivan6840 Жыл бұрын
me neither - wouldnt the tiles pull off the tape from the wall ? i mean there is no bonding at all between the membrane and the wall except for the tiny amount of the glue on the tape ? seems dodgey to me
@martinwalsh52122 ай бұрын
Notice he removed it then painted after ?
@karanvirdhammu46513 жыл бұрын
Where is membrane roll to put on corners ?
@markpugh97003 жыл бұрын
You CAN put it on quick BUT it takes FOREVER to clean up haze keeps coming back.its expensive rubbish.
@caregivershelper91843 жыл бұрын
Thanks a lot now I know how to fix my bathroom
@marcp1083 жыл бұрын
Seriously, don't waste your time. I tried this product and a grout pen. Absolute fail. Better off just regrouting
@locust77773 жыл бұрын
Takes him 5 minutes, takes me 6 weeks...
@johnklein95343 жыл бұрын
I feel the video was very informative.
@senqureshi15973 жыл бұрын
I m doing water proofing with 100% gurrenty kzbin.info/www/bejne/mWi0iKeemcl4Z5Y plz subscribe my channel if ur water leakege do not work then i will give u double monye its moneyback gurrenty
@fwengsolutions3 жыл бұрын
What happened there at 8:46 ? You seemed to suddenly whip that tile off and redo it. Weren't you happy with it?
@1BCamden3 жыл бұрын
Great video, thanks
@glennmorley48844 жыл бұрын
Dreadful amateur video.
@tonygoshive7854 жыл бұрын
What a bodged job.. new grout will not bond to old grout without removing at least 50% of the old grout away!!
@deano22383 жыл бұрын
I always remove 50% of grout never trust everything you read
@fullyerect12943 жыл бұрын
@@deano2238 so how can we trust what you wrote?
@Swalexbass5 ай бұрын
This is not a cement based grout, it's a styrene-acrylic resin based grout. It works.
@hunterhofman35554 жыл бұрын
my invite must of got lost in the mail pete
@Theteese4 жыл бұрын
Goes off very quick while filling the joints and makes applying it quiet difficult... Seems to leave more grout haze than normal grout and final clean up is a pain.... DO NOT leave the slightest haze for a long time as it will be PAINFUL..
@bigdogg96444 жыл бұрын
Who won?
@gustavoalvarado16344 жыл бұрын
Hay un vídeo que subieron quien fue el ganador .
@vickiandbobmerivale71864 жыл бұрын
Can this be used on the floor of the SHOWER?
@antonhaz47935 жыл бұрын
Watching you waterpoof is like a leak waiting to happen why didn’t you close the corners of the angles or fill the back and front of angles
@sheena90905 жыл бұрын
Please do a before and after at the end of the video
@romand1235 жыл бұрын
That sponge is gigantic
@stevespiekman46375 жыл бұрын
Since when is waterproofing the whole shower wall mandatory? The Australia standard (AS3740) says waterproofing is only required to 150mm above floor level, plus the penetrations , ie, nail holes, horizontal joins and internal corner to 1.8m. The remainder only needs to be water resistant, ie, Villaboard. If you're going to do a video, please do it to the Australian standard rather than dreaming it up as you go along.
@Fr4nt1ck5 жыл бұрын
The requirements will depend on your state, but the NSW ones require a shower cubicle to be either waterproof or water resistant (depending on whether it's fully enclosed) up to 1800mm above the floor. See nsw.hia.com.au/documents/2008/1.%20January/9th%20January/NAT%20BCA%2007-21%20Wet%20area%20waterproofing%20requirements%20BCA%202007.pdf
@IainMiddleton4 жыл бұрын
@@Fr4nt1ck Your link says exactly what Steve said, and you argued. The requirements are 'National' as in AS3740, also exactly the same as your link. WR 'means' water resistant, for very good reasons. WP means waterproofed, as in 150mm up walls, the 1.8 m you mention refers to the corner only. Look at the picture !
@nowirehangers28154 жыл бұрын
Your laziness is the reason people have to REDO their entire bathrooms.
@jon88643 жыл бұрын
If you follow the Australian Standards to the letter you can do as little as possible and not break the law, but it's ok to aim a little higher than that. Lots of people waterproof a lot better than this guy, nothing wrong with doing that.
@fwengsolutions3 жыл бұрын
I know I'll be going the full 1800. Why skimp? But then it is my own place, not working for others to a minimum standard.
@voxyapkimyasallar38146 жыл бұрын
Factors like materials, application surface, ambient temperature is important to choose the right product. If you do not choose the right product,you might face problems at application of setting materials and in the future tiles might fall off or not steady.Choosing right and good quality mortar or thin-set is as important as choosing your tile,marble, granite or travertine.Because your expensive marble will lay on this mortar of your choice for years to come.Be wise and get good rated products with standards.We personally recommend Vox construction chemicals products where they do not use silica as in their ingredients,but only calcit which is stronger raw material and no health issues such as silica.Their website is voxchem.com
@darianthemede57026 жыл бұрын
Fix your bloody instructions.
@darianthemede57026 жыл бұрын
And one more thing, bond breaker tape stopped being used after Adam and Eve left The garden of Eden.
@fwengsolutions3 жыл бұрын
@@jd2760s Silicone bead? I don't know.
@stephenc41612 жыл бұрын
100% just sikaflex perimeters and apply product .
@darianthemede57026 жыл бұрын
Also, nobody in the building industry knows the difference between reinforcing bandage and bond breaker tape.
@darianthemede57026 жыл бұрын
The instructions on the k10 plus container are not clear and are causing arguments in the industry . The instructions need to clearly state that no reinforcing bandage is to be used whatsoever.
@peterbeyer57555 жыл бұрын
Darian The Mede I watched what they do in the US. Amazing amount of tape over lapped into every corner set in thin set then covered with two coats of waterproof membrane.
@chrisfi3d6 жыл бұрын
1:27- viewers, make sure you put your sunglasses on.
@SirKGuido6 жыл бұрын
Can you use a white over a grey grout?
@StevenCampbell19557 жыл бұрын
If you leave grout for fifteen or twenty minutes you will need a sanding disc on a grinder to take the stuff off. This weather sets off the grout in five minutes. Too much water is the main problem for sure for certain.
@chrisford68587 жыл бұрын
check out the liping of those tiles . very diy
@benjamindelfs27185 ай бұрын
Peter is actually a professional tiler and world skills winner. This was just a mock bathroom in a warehouse for the purpose of an instructional. Obviously if it was a real bathroom he would of used clips and got it neat.