DARN! Just as soon as I buy my GC and find a good page to follow. 😔 Have fun with the Alfa
@BK-vj1oz15 күн бұрын
I love the look but it looks flimsy. How are they holding up
@alejandromaldonadovillela99117 күн бұрын
Love this video, exactly what I was looking for !!
@tlodland128 күн бұрын
Cute little girl! 😊
@terencemitchell419928 күн бұрын
Looks really good, it looks factory bro
@naamangeist784328 күн бұрын
FYI, that 16mm 6-point you used should have been a female torx E20 star socket. That's why you weren't sure what size to use because neither fit correctly. Also, you don't need blue thread locker, you need proper torque, that being 148 ft-lb. The factory didn't use thread locker but they did properly torque the bolts. The 11mm allen needs torqued to 41 ft-lb. The back 7mm allen gets torqued to 20 ft-lb and the 18mm bolts to 89 ft-lb.Finally the lug nuts get torqued to 100 ft-lb. If any of these bolts come loose, you're dead.
@945AjАй бұрын
Can I put this steering wheel on a 2011?
@lucan76Ай бұрын
Did you change the exhaust changed from stock?
@juanprenteria5077Ай бұрын
How many millimeters is the original rotor ?
@Staypuff777Ай бұрын
Nice parts selection! It sounds great. Four and six cylinders can sound good. But I think its important to go with some extra resonators and good mufflers. I have a 2.5" catback stainless system on my PT Cruiser GT (turbo model) with two long resonators and a 16" long oval straight through muffler. Sounds almost as quiet as stock but has a much better tone. Refined and sporty, not tinny. If a PT Cruiser can sound ok, anything can. Lol
@alexradillo9170Ай бұрын
What size are those rims? And off set? Digging those rims.. just got a 2017 grand Cherokee..
@michaelwoodward5787Ай бұрын
Looks great ! Just bought a 2016 laredo.
@kendrick23lamarАй бұрын
What 20% or 50% did u get them at???
@JAYZIGGY52 ай бұрын
I was torn between these and the 3W brand. I went with 3W because they were a little bit cheaper but they're literally the exact same thing. I even matched up the tire tread pattern. Exact same. Same box, same papers that came in the box. I wrote 3W and asked about that and they told me the Lasfit are made in their factory. I don't know if it's true or not but besides the logo they're identical. Just got mine yesterday. Love the look.
@shikari72 ай бұрын
Looking for that charging mount - the link you provide doesn’t seem to work. 😢
@bradwalker85442 ай бұрын
Did k&n send the blocker plate for the hood scoop with it?
@kevin-ur1pu2 ай бұрын
Did your jeep have any issues after mods? I’m looking to doing it to mine as well Also, will it a tune be enough for a good sound? Or is an exhaust a better option? don’t wanna do too much
@BiggV22 ай бұрын
🔥🔥🔥
@BigHustleTV2 ай бұрын
Can anyone tell me where u can find this? Everything I search specifically says for srt’s
@garychandler42962 ай бұрын
What hope is there for an 04' 3.7L?
@southfloridaskimmin2 ай бұрын
I think rather than 11mm Allen which is very uncommon an SAE size would probably fit perfect
@lisandroperez64162 ай бұрын
Yo brother I got question about that jeep limited x
@Texasmadesavii2 ай бұрын
Link to the steering wheel ?
@chakas032 ай бұрын
So Every time you change settings you have too put the car in park? Or turn off the car and change the settings? Need this for my srt jeep
@nopitium29292 ай бұрын
Intake on a v6 jeep. Come on dude. Get an old 5.7 or pay for the track hawk. Straight lame.
@BlklimitedX2 ай бұрын
Thanks bro
@MnuEditsАй бұрын
The 5.7 is just straight up worse heavier barely any more powerful than the v6
@karsonburns21532 ай бұрын
What diamond stitched floor mats did you have before?
@daleduberry16352 ай бұрын
Do u have any check engine lights or anything I've heard they suck hot air in the motor I have the same jeep
@floskrilla27122 ай бұрын
Finally I have been looking for a KZbinr with this car
@bluestarsodmg2 ай бұрын
Just got my SUV a week ago same as yours. But mines is a 2019 Jeep Grand Cherokee Laredo 🙌🏾✨🙌🏾
@itzquay-_69972 ай бұрын
How u take bracket off he say 17mm and 16mm but wat kind Rachet more info please ?
@karsonburns21532 ай бұрын
what filter wrap did you get?
@karsonburns21532 ай бұрын
Is it supposed to really loud when driving it
@Cashbabysixfoe2 ай бұрын
🔥🔥💻🔥
@EliteKrew3 ай бұрын
The wheel literally holds the rotor on and the brakes. You don't need to re apply that ring. Lol I can't believe the even added that rattle crap as well.
@SqueaksUofA3 ай бұрын
Whoa! $60-$65 for interior LEDs is a massive rip off. I installed blue LEDs in my interior for $10.
@JamesMiller-ir2sg3 ай бұрын
Does anyone have a link to a video showing how to wire new VLAND LED headlight assemblies on a 2012 Jeep Grand Cherokee Laredo?
@reginalewis41433 ай бұрын
Can you explain to me where the vent tube is installed on a 2020 Jeep grand Cherokee
@phillipreed14713 ай бұрын
Great vid thank you
@mrhandymanwatkins92903 ай бұрын
7/16 hex socket will works as well same as the h11
@Sm00thR0ckS3 ай бұрын
Great video! I just installed mine last night and this video was very helpful. Two questions: 1. If I step on the gas it really gets loud and a way more from what I was expecting. Is that normal? 2. everything looks pretty tight, but how would I know if there are any leaks? Thanks!
@BlklimitedX3 ай бұрын
If you mean louder as in intake noise, that’s normal. If everything is tight and no leaks you should be fine
@Sm00thR0ckS3 ай бұрын
@@BlklimitedX if I step lightly I barely hear any difference in the sound, but if I press hard it gives this loud growl. I was hoping that's normal and it's not because there is a leak anywhere. I used to have an AEM intake on a different car a long time ago, and it wasn't even near as loud. Thanks!
@Sm00thR0ckS3 ай бұрын
@@BlklimitedX btw I've been watching your videos ever since I bought my 2021 Laredo X. You put out some great content! Keep up the good work!
@BlklimitedX3 ай бұрын
@@Sm00thR0ckS thanks man I appreciate it! Haven’t posted in a long time but I still appreciate the interaction 🙌🏽
@johnalex443 ай бұрын
Do you think it will work on a grand Cherokee Laredo x? 21
@icecoldac33 ай бұрын
What does changing the throttle body do? I’m new to jeep vehicles
@TyroneKiddPHL3 ай бұрын
What did you change to get that sound. Did you change the exhaust?
@BlklimitedX3 ай бұрын
When I made this video, I hadn’t changed the exhaust yet. That came a few months later.
@TyroneKiddPHL3 ай бұрын
Where did you get the Carbon fiber steering wheel as well as the carbon fiber for the cup holder area?
@christoforoslefko43873 ай бұрын
I have a Cherokee lattitude do you think it’ll make a difference?
@authoritativebeer3 ай бұрын
Picked up the floor mats. Great video.
@caydenmassey74383 ай бұрын
Umm a 6 point on a torx bolt thoo
@blewis30613 ай бұрын
nice Jeep, and great videos. cant wait to see more.
@myothercarisadelorean89573 ай бұрын
I’m trying to buy same trim but in white and really hard to find