I probably have the same problem. Did you change the flywheel?
@RED_MIST57 ай бұрын
And i think that was from replacing android radio cuz battery was removed😂
@fineasmorarescu85888 ай бұрын
Hev yu removal plug glow🙏
@SolomonBervsenyi9 ай бұрын
I have exactly this model of car and I have problems with starting in the morning it starts very hard after about 7.8 keys it starts what could be the problem thanksI have exactly this model of car and
@tribex119 ай бұрын
I know this is a very old video but just wanted to say thank you as I have the same job to do and not a lot of money which is why I have such an old car. Have watched a few of these videos and this was by far the best most to the point vid and I now feel confident to do the job. Very much appreciate it so thank you 👍
@clockworkolive853310 ай бұрын
Why are you taking off the battery?
@skipp78610 ай бұрын
I used the Diesel EGR and Turbo Cleaner by Lucas. The battery was in the way, therefore, removed it. It may also help to remove the battery to reset the codes.
@abuabdulrahman3162 Жыл бұрын
Thanks man❤. It works 👍👍👍👍🙏
@24462962 Жыл бұрын
Thank you just done mine.
@skudikis Жыл бұрын
Thanks! It worked :)
@michellel3348 Жыл бұрын
That’s fierce helpful thank you! I have a Mazda 5 2007 and my driver side window won’t work but it will control all the other windows, by any chance would you have a solution for that?
@pragnesh02ee313 Жыл бұрын
If you find a solution then please reply this. Thanks
@suhailtariq3797 Жыл бұрын
Salaam brother. Are you local to midlands. My 2012 is showing dpf fault and egr. And it's in limp mode. If you could help that would be brilliant
@lethalshot164 Жыл бұрын
That was a relief, thank you
@Herrebaaen Жыл бұрын
Hey great video!what did you spray in the turbo at the end?
@skipp786 Жыл бұрын
It is the same LUCASOIL EGR & TURBO cleaner spray I’ve been using @11:55. Follow the instructions on the can on how to use it.
@ChristopherLedwich Жыл бұрын
3rd time I've replaced the battery in my now 10 year old car and the 1st time this has happened... Thank you!
@JayG2K Жыл бұрын
are you anywhere near the midlands as i need this done on my car
@RTB-1157 Жыл бұрын
Very wrong! And what you said was the drain is also incorrect..... the drain is further back to the left of the VW plate!
@taurireinike47207 ай бұрын
Can u help me find the correct one ?
@iulianstanescu1832 Жыл бұрын
Dear Captain, please help me. I think I did something wrong... I used the method, it still doesn't connect to function all the windows from the central console, but that wouldn't be the biggest problem ...the car doesn't start anymore. What could I have done wrong? How do I reset or return to the previous state to start the car?.
@alanfitzpatrick8280 Жыл бұрын
Getting dizzy with tne camera work, had to stop watching
@freedomofmotion Жыл бұрын
Thanks for sharing. Seems the egr causes a lot of problems for this engine.
@skipp786 Жыл бұрын
This car, in the uk, has a lot of problems. It’s a cheap f***d up engine in these.
@zhiyuanshi-dk2gn Жыл бұрын
thank you
@barmalei2720 Жыл бұрын
Ассаламу Алейкум брат умения такой же оутландер на малых оборотах на 1.2.3.передаче пенается это может быть клапан EGR дай АЛЛАХ тебе здоровья
@paulsingh199 Жыл бұрын
nice clip but poor sound....
@danailvasilev65622 жыл бұрын
Correct, it's the canister purge valve
@samcarson84412 жыл бұрын
Location of wiper relay?
@highbank20012 жыл бұрын
You should sack your cameraman
@robertmedina31952 жыл бұрын
I just did the starter on my 2011 Mitsubishi Outlander SE. I did not remove the intake manifold, that would add a lot of time and work. What I did was remove the throttle body, removed the front bumper and then you can access the two starter bolts. After that you can slide the starter toward the pulleys on the engine. However, you made need to file a bit of the webbing down on the intake manifold but it will come out. It took me 2.5 hours to figure this out but I installed it very quickly and got it running again. I hope this helps everyone to remove those buried starters!
@denbleach37122 жыл бұрын
Thank you, was about to do the long and painful way
@robertmedina31952 жыл бұрын
@@denbleach3712 maybe start the job by removing the bumper and plan the job from there. Once the bumper is off you get a pretty good idea of what to do.
@JaiMackenzie Жыл бұрын
I just put the car on 2 axle stands crawled underneath and took me about 30-45 minutes to replace the starter
@Enigmai619 Жыл бұрын
Doing the Lord's work child, bless you.
@glenwhitestofer64209 ай бұрын
Proper procedure as per shop manual is what you did ,remove throttle body noy intake
@nasnas93362 жыл бұрын
Useless video, bad quality, does not mention if this is an e53 e70 or anything else
@Jimmy_Ahmed2 жыл бұрын
Thank you 👍
@velianyordanov1242 жыл бұрын
Hello! Do you have good news about the starter? I had the same issue. Every 5th or 6th time, starting fails. It it very annoyng sound. I replaced the flywheel, because the teeths were eaten by starter and the result is the same. Tried another second hand starter and the result also the same.
@mahmed31952 жыл бұрын
I got a mitsubishi grandis with same engine and at high speed it doesn't pickup anymore. Do u think it is same problem
@skipp786 Жыл бұрын
Clean the exhaust manifold and EGR (might need replacing)
@RioTintoGoAwayFromDrinaRiver2 жыл бұрын
Did the car have less power due to a faulty sensor? My 2007 C4 Picasso has identical error codes + not enough power until it exceeds 2500rpm. Has power returned by replacing the faulty MAF sensor?
@skipp7862 жыл бұрын
Mine had no power issue. It was same before and after the change.
@RioTintoGoAwayFromDrinaRiver2 жыл бұрын
@@skipp786 All sensors use the same voltage for power supply? If one sensor is short/fault, all sensor have bad workiing condition because of voltage drop? Am I right?
@homeistheearth2 жыл бұрын
So you had a code for almost everything else than the MAF sensor?? Pretty crazy and hard to figure out..
@MRnormanfranko2 жыл бұрын
Thank you!!!
@rikardkomani54512 жыл бұрын
Hello, can you please send me a photo of the two plugs from the control unit, white and black, since I broke both of them and bought new ones, but I don't know how the colored wires are assigned, if you could send me a photo I would be very happy.
@skipp7862 жыл бұрын
Hi Rikard, Sorry but car is sold. All I am left with is this video if you can find it in there. Thanks
@VeryCreativeUK2 жыл бұрын
Many thanks
@lordcondio10362 жыл бұрын
Thank you your video. I'm glad it wasn't just me. I had to loosen the drivers side headlight to replace the dip beam bulb and still struggled! What a stupid design. kind regards.
@Jogurtnik2 жыл бұрын
PRO TIP: use dedicated cleaning solution for EGR's, it's only 5-10€ (depending where you live)
@jambacardi24742 жыл бұрын
Thanks got to replace mine tomorrow
@Muqbooli2 жыл бұрын
Very useful after replacing battery. Thank you
@skipp7862 жыл бұрын
@oliver I said it at 0:10 that it’s 2010. Probably you skipped first few seconds.
@oliverbigelow25012 жыл бұрын
Year if car would help
@skipp7862 жыл бұрын
At 0:10 I said 2010. Probably you skipped first 10 seconds. Cheers.
@javanrobinson30812 жыл бұрын
@@skipp786 you should put the year in the title
@skipp7863 жыл бұрын
@12:34 the grim discovery...shi@ lol thats when I discovered the flywheel teeth problem for the first time. Before this I assumed the teeth on flywheel were unbreakable but I was so wrong. They were chaffed halfway.
@miszczu853 жыл бұрын
Four years ago, in my used Outlander, the same sound could be heard when firing, I gave the starter for regeneration and it did not help later I replaced the flywheel. It's been four years and I already have a new flywheel fitted and is just installing a new starter