The Yamaha YH-WL500 can get loud with minimal clipping and no hiss, but they are unusable due to interference / audio dropouts with any Wi-Fi router in the vicinity. The AIAIAI TMA-2 Studio Wireless+ have minimal issues with interference, but they don't get loud, they clip easily, and they have a significant hiss problem. The ultimate product (for me, at least) would be one with the best of both these headphones' features (that is, minimal clipping, loud signal, no hiss, and no interference). Will iWA be such a solution? (I just heard about CME and registered)
@CMEPro2 күн бұрын
@@rombsix what we are currently looking at is a tx/rx solution that can make your wired headphone go wireless. You can use your favorite headphone, and we can make it wireless. That is the first idea 💡
@rombsix2 күн бұрын
@@CMEPro - that sounds great, but the problem is there would still be a cable between the rx and the headset (the actual cans). In that case, some of the wireless IEMs that already exist would be serving a similar function, no? I get it, that your tech will be more affordable than the pro level IEMs that cost in the thousands of dollars, but there would still be the hassle of a belt-pack and the hassle of the cable going from the belt-pack (i.e. the rx) to the cans / earbuds that are in contact with the user's head / ears. What I like about the Yamaha and the AIAIAI solutions is that they are truly cable-free, so just a short cable from the audio interface to the tx, and zero cables on or near the body of the musician (and no belt-packs but rather just the headset that has all the rx tech inside the headband). Can we dream of such innovation from CME in the future? Basically, it would be the current Yamaha product minus the interference (I know, that is one of the two hearts of the matter). After extensive testing, I had to return the Yamaha headphones (after purchasing them twice and not being able to get rid of the dropouts) and accept the limitations of the AIAIAI headphones. With the AIAIAIs, there are zero dropouts, rarely (if any) pops/crackles, and the audio quality is acceptable, but yeah, clipping issues, signal is not loud enough, and that damn hiss... Save us, CME! :P
@CMEProКүн бұрын
@@rombsix we take this step by step. First the core technology, followed by integrations like you propose. So, yes it is possible we will go into that direction. The idea is, HD audio, without latency, without interference 😊
@mariolopes336216 күн бұрын
Can it still work if the computer does not have Bluetooth?
@CMEPro14 күн бұрын
@@mariolopes3362 you can use WIDI Uhost or WIDI Bud Pro to add Bluetooth MIDi to your operating system. Hope this helps!
@ageshero16 күн бұрын
The Alesis vortex already has blutooth midi tho
@CMEPro16 күн бұрын
@@ageshero could be, there are different models of the Vortex, and many people use WIDI to bypass (upgrade) the Bluetooth MIDI option to the highest level. There are also people using WIDI Uhost or WIDI Bud Pro to bypass the Bluetooth of their operating system for optimal performance. Hope this helps 🤗
@KRAIZDJ16 күн бұрын
My Widi Master is green instead of blue, and doesn't appear in the Bluetooth devices
@CMEPro16 күн бұрын
@@KRAIZDJ if it is green it is stuck in firmware update mode. You can delete all WIDI devices from your mobile’s general Bluetooth device list, open WIDI App and resume the updating process. You can check out the online start guide or this blog for assistance. It should be fairly easy to solve. If you are not up and running in no time, please do reach out via bluetoothmidi.com www.cme-pro.com/easy-fix-for-widi-app-and-firmware-update/
@crabbydad8931Ай бұрын
how much power does this draw - need a large battery bank or small battery for a 4 hour gig?
@CMEProАй бұрын
@@crabbydad8931 the power consumption of WIDI devices is really low. Make sure you have a power bank that does not have a sleep mode, as those will think there is no device attached, because the power consumption is so low, and turn themselves off. If you use it as a wireless host for a USB MIDI client device, it can power that device through a single standard USB power source. The question is which hardware are you powering via the WIDI Uhost, that is the one you should scale your power source towards. Feel welcome to opt-in on the shared knowledge of the community via facebook.com/groups/cmeprofans Hope this helps 😀
@nethonchoАй бұрын
Awesome setup
@TheIllynowАй бұрын
I have these devices: Native Instruments Maschine mk3 Behringer Deepmind 6 Behringer Pro 800 Waldorf Blofeld Modal Craft Sonicware Liven Lo Fi 12 Is the Midi Thru5 WC what I need to run everything?
@CMEProАй бұрын
@@TheIllynow MIDI Thru5 is a MIDI splitter. You can have a single input and copy that to its 5 outputs. It is only for MIDI I/O, not for USB MIDI. So, if you have one central hardware device, and you want to control 5 other pieces of hardware, you are good with the MIDI Thru5 and using 16 MIDI channels. If you want to have more control and configure routing, add a computer, and even filter, consider adding the U6MIDI Pro. Hope this helps!
@TheIllynowАй бұрын
@@CMEPro It really did. Thank you so much 👍
@ZombieLincoln666Ай бұрын
Can it transmit/receive sysex messages?
@CMEProАй бұрын
@@ZombieLincoln666 yes, long ones too!
@tranquilitybase6417Ай бұрын
When will this be available? I’m searching for a way to get audio from my guitar in to my Apple Vision Pro. It would probably have to be BT audio. Thanks!
@CMEProАй бұрын
@@tranquilitybase6417 this is not Bluetooth Audio. It is a new tech, developed by CME. You can check our blog and subscribe to get notifications: www.cme-pro.com/iwa-instant-wireless-audio-by-cme/
@AndreiCantacuz-us2twАй бұрын
when I sing with him during the singing the sound stops, can someone help me?
@CMEProАй бұрын
@@AndreiCantacuz-us2tw no idea what you mean, are you sure you are at the right place with this question?
@AndreiCantacuz-us2twАй бұрын
when I sing with him during the singing the sound stops, can someone help me?
@CMEProАй бұрын
@@AndreiCantacuz-us2tw no idea what you mean 🙃 Are you sure you are asking the right people?
@coskuarsirayАй бұрын
a great contoller.
@TheUftoneАй бұрын
U6MIDI pro best !
@Gem-ExАй бұрын
Amazing :D
@betsonmusic2 ай бұрын
Can you use it with a Macbook? what is the range of distance? Does it send also MIDI cc values? not just MIDI note values? Thanks!
@CMEProАй бұрын
Yes, 65ft, yes 👍 You can wirelessly connect to the built-in Bluetooth of your Mac. You can also use it as an advanced Bluetooth MIDI interface to bypass the onboard Bluetooth by plugging it into your USB port. Range is 65ft (30m) without obstacles. WIDI can transmit any MIDI message, including MPE, Sysex and CC/PC
@betsonmusicАй бұрын
@@CMEProthanks for the response:)) Also, does it send back MIDI? I’m looking to connect it to an Akai APC 40 mk2 to move on stage controlling Ableton. The plan is to give power to the device trough a battery with pass through connected to the Apc USB port,and then connect the WIDI device to the battery. But the Apc show’s the lights of what’s going on in the computer. So would it receive that information from the computer?? Could I change things on the computer and it would appear on the device like when it’s connected with usb cable? Thanks!🙌🏻
@CMEProАй бұрын
@@betsonmusic it depends on how your APC is designed. WIDI devices are bidirectional by default. They can transmit any MIDI message. I do not know your device, but if it is class compliant plug and play USB MIDI, it is compatible with WIDI Uhost. You can power both your hardware and the Uhost via a single power source plugged into the Uhost. Make sure to use a USB OTG cable between your Uhost and APC to ensure it can operate as the host for your client controller. Also, some manufacturers use USB ports to transmit other data than MIDI. WIDI devices only transmit MIDI messages. You can learn more via the online start guide: www.cme-pro.com/widi-uhost-start-guide-bluetooth-midi-usb-host/ Hope this helps 😀👍
@Meteotrance2 ай бұрын
Serious YMO Ryuichi Sakamoto Vibe here ^^ !!!
@idaho_rex2 ай бұрын
Will I be able to use my USB keyboard to trigger a hardware synth connected to the CME through my DAW (reaper)
@CMEPro2 ай бұрын
If you plug in the USB keyboard directly in your PC to control your DAW, you can route that signal to your U6MIDI Pro via a second USB connection and control your synth: www.cme-pro.com/u6-midi-pro-usb-midi-interface-routing-filter/ If you want to control your synth directly you can also consider the USB host functionality of the H4MIDI WC: www.cme-pro.com/h4midi-wc-usb-host-midi-interface/ Hope this helps 🤗
@TheLordcasio2 ай бұрын
These things are PURE GARBAGE!!! I've never had to waste so much time on something that refuses to work. Constantly turning off every thing with Bluetooth after the settings are made only to have the units 6" away and STILL NEVER SYNC. The only thing they sync to is the computer, once the Bluetooth is back on. I've made Groups, I've deleted Groups and tried Auto-Learn. I've followed every instruction...PURE GARBAGE!!!!
@CMEPro2 ай бұрын
I am sorry to hear this has happened and you’ve had this bad experience. I can totally understand this leads to much frustration. Creating groups is an advanced feature, it requires the execution of the entire scenario. We always recommend to explore options in simple mode first, to get a better understanding of what WIDI can do for you, and only expand to an advanced setup based on that experience. In group mode, a tiny bit of latency us added to keep a stable jitter. I am not sure I understand your explanation entirely, but it reads like this might cause the issue at your side. Feel free to reach out to us directly and get the support you deserve. I am sure we can get this up and running with you: www.cme-pro.com/support/#tve-jump-183922d36ae
@jesuschoquezurita55822 ай бұрын
Puedo usarlo sin cable de alimentación de corriente?
@CMEPro2 ай бұрын
El WIDI Master puede alimentarse desde la salida MIDI de su hardware MIDI. Si su hardware no suministra alimentación, necesitará WIDI Jack y una fuente de alimentación externa a través de USB-C.
@GetchaPull2 ай бұрын
I am trying to connect my Boss Katana MK2 amp to the Boss Katana AIR/EX app via bluetooth but I always get a "communication error" message. Can you tell why is this happening? Thanks and regards.
@CMEPro2 ай бұрын
Please make sure you update the Bluetooth firmware to v225 and that you use a USB OTG cable between your Uhost and Katana. If the problem still persists, reach out for some personal guidance via: www.cme-pro.com/support/#tve-jump-183922d36ae Also, check out the online start guide for WIDI Uhost: www.cme-pro.com/widi-uhost-start-guide-bluetooth-midi-usb-host/ Hope this helps 🙏
@ryanberry67802 ай бұрын
trying to use widi uhost to connect my amplifier katana boss mk2 50w im powering my widi and it won’t connect to the katana librarian app whats happening?
@CMEPro2 ай бұрын
Please make sure you update your WIDI Uhost to the latest Bluetooth firmware v225 There was a bug in v224 for BOSS devices. They require an extra piece od code. This is now fixed. Apologies for the issue, it should be solved now. Feel welcome to reach out via www.cme-pro.com/support/#tve-jump-183922d36ae if you require more assistance 🙏
@ryanberry67802 ай бұрын
@@CMEPro i’ve got all the latest firmware all updated and it still won’t connect it’s frustrating i bought the device solely for this purpose and i cannot use it
@CMEPro2 ай бұрын
@@ryanberry6780 did you use a USB OTG cable between your Uhost and Katana?
@CMEPro2 ай бұрын
@@ryanberry6780 did you try to clear the Bluetooth connection cache of your mobile device? www.cme-pro.com/widi-uhost-start-guide-bluetooth-midi-usb-host/#tve-jump-1834a41e610
@ryanberry67802 ай бұрын
@@CMEPro no because the otg cable is a printer type cable, my katana doesn’t have that it’s been replaced for a standard type c port so instead of the otg on the amp it’s type c so i’m powering the widi with a type c and connecting the widi to the amp using a type c to type c cord, the app is recognising the device and it has a green light but is refusing to connect
@Maxximo2 ай бұрын
Can i use this to connect my casio privia 1100 that was built in midi to windows and ableton without the casio app?
@CMEPro2 ай бұрын
If your Casio offer Bluetooth MIDI it should be able to connect wirelessly to Windows with WIDI Bud Pro. Personally I am not familiar with your hardware or with the Casio App, but feel welcome to reach out via www.cme-pro.com/support/#tve-jump-183922d36ae or via facebook.com/groups/cmeprofans to get your answes!
@jamesredmon812 ай бұрын
Widi uhost only works once then plan on buying a different Bluetooth device
@CMEPro2 ай бұрын
Not sure what you are exactly saying, but it seems you require some additional assistance to get your setup up and running. Feel welcome to explain your exact setup so I can assist you properly. If you have had it working, it will work again.
@Azuma9512 ай бұрын
Is there anyway to get it to actually update the firmware? Mine is stuck on V1.4 and will not update no matter how many times I try. It simply stays in bootloader mode, when I hit upgrade and it says success and disconnect it literally does the same thing in a loop. This is driving me insane, I need help please. I literally cannot get it to actually update the Firmware and get out of Bootloader
@CMEPro2 ай бұрын
Sorry to hear this. I can imagine the frustration. Just go here, fill in the form and you will get the assistance you deserve to solve this asap: www.cme-pro.com/support/#tve-jump-183922d36ae
@CMEProАй бұрын
@@midisynthminds I think there was an issue with the firmware, it is fixed by processing a special sysex. If you experience a similar issue, simply reach out via support 🙏
@midisynthminds14 күн бұрын
@@CMEPro Resolved by setting device to factory defaults and then reloading the firmware.
im buying widi uhost and i use akai mpk mk3 but not see ableton live 12 please back you thanks
@CMEPro3 ай бұрын
Make sure your WIDI Uhost is updated for USB and Bluetooth via WIDI App. After updating make sure your WIDI device is deleted from the general Bluetooth device list of your mobile device that runs WIDI App. Depending on your operating system, follow the instructions as provided via the online start guide: www.cme-pro.com/widi-uhost-start-guide-bluetooth-midi-usb-host/ Hope this helps, if you need any assistance, please do reach out via www.cme-pro.com/support/#tve-jump-183922d36ae 🙏
@MajorMoment3 ай бұрын
what does it mean when it flashes blue rapidly, but the pattern is not like in any of your examples? it looks more sporadic, less predictable. the device in question should be just solid blue, it’s one of 5 in a group, a peripheral, and is connected to a Roland SPD-SX. If connected to another output, the device acts as it supposed to.
@CMEPro3 ай бұрын
It means that is is either sending or transmitting messages. Maybe you have a constant clock transmitting or another MIDI message. It is normal behavior. If it is a peripheral, your central must respond in a similar way, as it is receiving or sending those messages: www.cme-pro.com/widi-master-start-guide-bluetooth-midi/#tve-jump-18349eea4cb If you need any guidance, feel welcome to join facebook.com/groups/cmeprofans or reach out via www.cme-pro.com/support/#tve-jump-183922d36ae Hope this helps 🙏
@ernstaugustvonsachsen69253 ай бұрын
Very disappointed with this device. When I plug in the power via a power bank the light on the left is solid turqoise. When I plug in my midi device on the other end, the light on the right is turned on and is solid green. From there on, nothing happens. I can't connect the Widi Uhost to my device using bluetooth. Why is it turqoise and not blue? I have been able to set up the Widi Uhost via bluetooth before so the latest firmware is installed.
@CMEPro3 ай бұрын
Sorry for the inconvenience. If you connect two WIDI devices to each other, one will stay blue, the other turns turquoise indicating it operates as the central. When you connect a WIDI device via Bluetooth to an operating system, it will stay blue as it will always operate as the peripheral of the operating system that acts as the central. This is about the Bluetooth LED on the left. The green LED on the right turns green when you connect the USB side and it powers on. This is normal behavior: www.cme-pro.com/widi-uhost-start-guide-bluetooth-midi-usb-host/#tve-jump-1835c2af79e I guess your WIDI Uhost is automatically connected to the device that you used to upgrade its firmware. This occupies the connection, and at that point it is no longer available to connect to your MIDI device via Bluetooth. That is standard behavior too. You should remove your WIDI Uhost from the general Bluetooth device list of your mobile device used for updating via WIDI App, to avoid this auto-connectivity. Once that is done, the left LED will blink blue slowly, indicating it is waiting for a connection. If your MIDI device has integrated Bluetooth MIDI, they will now be able to auto-connect. You can use group auto-learn to create a fixed connection between your WIDI device and your 3rd party Bluetooth MIDI controller. Please check out the online start guide to understand the LED indicators and locate the scenario for connection instructions for your specific setup. www.cme-pro.com/widi-uhost-start-guide-bluetooth-midi-usb-host/#tve-jump-1835c2af79e If you need more guidance, let me know or reach out via support: www.cme-pro.com/support/ 🙏
@patdahat70283 ай бұрын
I can’t even squint enough to see a single word after the opening page. You call this a “tutorial”?!? Fire whoever is responsible for this 💩 and start over! 🎩🙄😡👎
@CMEPro3 ай бұрын
Oh dear. I understand your frustration, but implying to ruin someones life, just because it does not suit you, is really a bridge too far. Sorry, but that is not okay. For complete explanations and start guides, simply go here: www.cme-pro.com/cme-widi-app-online-start-guide/ For complete start guides on product level go here: www.cme-pro.com/support/#tve-jump-183c593fe0d For direct support go here: www.cme-pro.com/support/#tve-jump-183922d36ae If you need any specific assistance feel welcome to describe your issue. I am happy to assist you, and sure you will get a resolution in no time 😀👍
@patdahat70283 ай бұрын
@@CMEPro Sorry. You’re right. My bad. Didn’t mean to go “Karen” on you.🙄 I humbly apologize. I’ve updated the firmware, (I think?🤔) and the WIDI Jack is paired and seems to receive information (flashes blue) imbedded in the iPad-Stage Traxx3-Lyrics. However, it no longer changes the patches (PC) on my Roland GT-1000Core, as it previously did. As far as I know, nothing was changed on the effects pedal to cause this. Not so sure bout the syntax in Stage Traxx3, however. I am seeing differences, now, from what Peter’s online messages and video tutorials offer, compared to what I originally culled from the online User Manual - that WAS working. For reasons still unknown to me, whatever was working between these three devices suddenly isn’t with regard to midi PC messaging implementation, and it’s negatively impacting my solo ‘live’ performance. 🎩😖🙏
@CMEPro3 ай бұрын
@@patdahat7028 not sure what you exactly mean, but try clearing the Bluetooth connection cache of your iPad www.cme-pro.com/widi-jack-start-guide-bluetooth-midi/#tve-jump-1834a41e610 Also make sure your WIDI Jack is correctly plugged in and set to the correct polarity. If you are using 5-pin DIN cables from CME, you should set it to type B. If you are using TRS MIDI cables, check the manual of your GT to ensure the switch on the WIDI Jack matches the type (A/B) of your GT. www.cme-pro.com/widi-jack-start-guide-bluetooth-midi/#tve-jump-1834aabf30c There are many people who might have a similar setup and can help you clearing up this challenge. You can find them via facebook.com/groups/cmeprofans - just drop a post there to get assistance. Or reach out via www.cme-pro.com/support/#tve-jump-183922d36ae - we can look into it together to get it working. Hope this helps, and apologies accepted. No worries 😎👍
@AnomieDomine3 ай бұрын
Can the U6 MIDI pro get upgraded with a WIDI board?
@CMEPro3 ай бұрын
No, you can plug in a WIDI Master instead 😀👍
@trajede3 ай бұрын
@@CMEPro I just purchased u6 pro. I was wondering is there a tutorial anywhere for Ableton for live performance on stage set ups? I am a keyboard player trying to connect multiple keyboards & midi controller, ipad. I can't find a tutorial anywhere to help set this up. Is there a tutorial for the software that comes with this??
@CMEPro3 ай бұрын
@@trajede you need to set it up like any other MIDI interface in Ableton. For configuration via UxMIDI Tools, you can refer to the online start guide via www.cme-pro.com/start-guide-for-uxmidi-tools-software-by-cme/ Hope this helps 🙏
@Jackmitchell03124 ай бұрын
Hi guys! Can I use this to connect a Midi control phone app to my DAW (on PC)? will be buying one today if you can confirm
@CMEPro4 ай бұрын
Yes, that is possible. Just follow the instructions from the online start guide: www.cme-pro.com/widi-bud-pro-start-guide-bluetooth-midi-dongle/#tve-jump-1836895be6f
@meatmeep34624 ай бұрын
These devices should come with their own internal power…
@CMEPro4 ай бұрын
We’ve chosen to provide a power option via USB-C. This way, you do not have to pay for features you will not use.
@meatmeep34624 ай бұрын
And that was a bad choice. Up the piece and include internal power!!
@CMEPro4 ай бұрын
@@meatmeep3462 internal power requires additional certifications, and will increase the sales price of the device. This while most hardware provides power over MIDI Out. At the same time, we cannot compete with pricing of power options currently on the market. The USB-C solution is the best choice for us, and the majority of the MIDI community. Of course not for all, but I think it is justified with its current price point. Hope this helps to place things in a wider perspective.
@KudaBear-jy1zl4 ай бұрын
@@CMEPro This is not true. MOST hardware devices do NOT provide power. Certain music devices do, like Keyboards or multieffects, but many controllers do not provide power at the MIDI jack. This severely limits the use of the product and makes it unusable for me, as about 80% of my devices do not provide power at the jack, so I agree with meatmeep above. I would happily pay three times more to have internal power as part of the device. Having to attach a third-party battery completely negates the point of having a small MIDI jack device, and makes this unusable as a solution almost anywhere.
@CMEPro4 ай бұрын
@@KudaBear-jy1zl I understand your position on this. The honest story us that it has been considered, but the best option is to offer WIDI Jack with an external power option via USB-C. Actually, WIDI Jack was specifically designed for this scenario. It does exactly the same as WIDI Master, and adds exchangeable cables and external power. This widens the usage of WIDI to unpowered MIDI ports, devices with only MIDI in, TRS MIDI type A/B and even the rare DIN-6 mini, sometimes used by Yamaha. Again, I understand it is not the perfect solution for your scenario, but it delivers a solution for many. From a development perspective, you have to keep in mind that adding batteries has consequences for certification, safety and the design. It requires a different moulding, and a higher cost. As WIDI Master and WIDI Jack already offer a solution for many, the remaining market for your solution becomes small and the price will go up. Not only for certifications and safety requirements, but also for a small market with a small production requirement. These are all decisions we have to take into account, and that is why we are currently at this stage. Of course, an internal battery can be considered, but imagine what it will do for service matters. An external power option is easily replaced. Integrating an internal battery in the design, requires servicing for many years of that exact same model for replacement. Maybe in the future we are able to meet your requirements, as the demand rises for WIDI, making the market large enough for a solution like yours. I hope the above provides you sufficient insights to understand why these kind of decisions are made. I do appreciate and understand your demand for this, but we simply cannot supply that at this moment. 🙏🙏
@Praxever4 ай бұрын
Would this help to connect a Midi controller with Bluetooth built-in to a Korg Volca Fm synthesizer?
@CMEPro4 ай бұрын
Yes, it can. If I remember correctly, the Volcas have only MIDI In. If that is correct your solution is WIDI Jack + 5-pin DIN accessory cable, and an external power source via USB-C 😀👍 www.cme-pro.com/widi-which-device-will-you-connect/
@wohjmusic4 ай бұрын
TKS man
@diegoandrescubidesacosta59034 ай бұрын
I received mine today, but i just cant get it connected with a playwell wireless midi controller, ¿somebody that may be help me with this issue?
@CMEPro4 ай бұрын
I just checked some details on the Playwell. It seems like a useful device. As far as I understand their specs it requires an app and an operating system to function via Bluetooth. I guess the Bluetooth of the Playwell is limited and that causes your issue. If you think this is not the case, make sure to follow the exact instructions as provided via: www.cme-pro.com/widi-master-start-guide-bluetooth-midi/ If you require personal assistance, please fill in the form via www.cme-pro.com/support/#tve-jump-183922d36ae Hope this helps 🙏
@diegoandrescubidesacosta59034 ай бұрын
@@CMEPro thanks!
@simomatti42824 ай бұрын
Is it possibile to change presets in a fractal AXE fx3, with this unit?
@CMEPro4 ай бұрын
WIDI is like a virtual MIDI cable. If presets can be changed via MIDI messages on your Axe FX, it can be done with WIDI. Feel welcome to drop a post in our Facebook Group to find people who can share their experience with you: facebook.com/groups/cmeprofans
@Hakucho644 ай бұрын
Can any of these boxes act as a USB host? I'd like to use several USB-only MIDI controllers to control several DIN-only MIDI instruments.
@CMEPro4 ай бұрын
No, the USB ports are all for USB hosts, like your operating system. In our wireless solutions, we do offer WIDI Uhost, it might be interesting for you: www.cme-pro.com/the-best-midi-usb-host-is-wireless/
@CMEPro2 ай бұрын
We recently released the H4MIDI WC that functions as a USB host: www.cme-pro.com/h4midi-wc-usb-host-midi-interface/
@Hakucho642 ай бұрын
@@CMEPro looks unbelievable, thanks for letting me know!
@LukeSchneiderEWI4 ай бұрын
Great ! I want to bypass my mac os's bluetooth , can I buy two widi masters and connect my yamaha wx5 wind synth to the midi in of my audio interface ? Would thst improve latency by bypassing the operating system ? Thanks 👍
@CMEPro4 ай бұрын
Assumably it will improve it. Please check this blog for selecting the right WIDI device: www.cme-pro.com/widi-which-device-will-you-connect/ As you can also plug in a WIDI Bud Pro or WIDI Uhost directly in the USB port of your mac 🙃 And follow the instructions of the online start guide: www.cme-pro.com/widi-master-start-guide-bluetooth-midi/ Hope this helps 👍
@7yotta4 ай бұрын
Can I move midi tracks from my Motif to my iPhone
@CMEPro4 ай бұрын
I am not sure what you exactly mean, but WIDI can transmit any MIDI message, it is like a virtual MIDI cable. Hope this helps 😀👍
@elundhor77254 ай бұрын
Hello, I have a problem with my 2 widi masters. I've had them for about 5 months and they've had little use. At first they worked well. But I had to dismantle the studio and put it back together. Since then I can't transfer midi to my Kontakt 7 program. I didn't change anything about the settings and I checked everything and it seems to be correct. The lights flash rapidly blue on one side and light blue on the other. They always flash quickly, without me touching the instrument.
@CMEPro4 ай бұрын
If it worked before, we should be able to get it working again. Please make sure that you plug in your WIDI Master correctly. The large main adapter needs to go into the MIDI Out and the small sub adapter in the MIDI In. Also, make sure your WIDI Master is not connected to your mobile devices that runs WIDI App. What you explain is a working connection that transmits. Assumably your issue is not associated with the wireless connection, but with settings in your software. Did you check your MIDI channel settings? Feel welcome to reach out to get direct support from the community via facebook.com/groups/cmeprofans Or via www.cme-pro.com/support
@widiwinarni52305 ай бұрын
Hallo widi. Hadir disini salam supportnya 🙋🙋❤️❤️
@user-raudinis_jini5 ай бұрын
Can the Alesis Vortex Wireless 2 Master Keyboard and Roland Sound Canvas sc-88 be connected?
@CMEPro5 ай бұрын
In principle any MIDI device that follows the standards can work with WIDI. You can check out this blog to learn more about the different options: www.cme-pro.com/widi-which-device-will-you-connect/ If you require more assistance, feel welcome to drop a post via facebook.com/groups/cmeprofans Or reach out via www.cme-pro.com/support Hope this helps 😊👍
@danrosesexperiment5 ай бұрын
Can't wait...
@rickthestick85 ай бұрын
I'm very excited for the release of this product! I will need four stereo sets, any ETA?
@hartonray5 ай бұрын
Are this compatible with Roland XPS-10 or just buy wireles transmitter receiver
@TheDa7xz5 ай бұрын
Can i connect 2 both widiflex to 1 iphone at the same time?
@carluschin5 ай бұрын
its impossible to reset or boot the widi master, the instructions are not clear, i cant connect my widi jack and widi master, can you do a video explaining how to reset and start again, it just always keep in blue and nothing is connected
@CMEPro5 ай бұрын
Two WIDI devices pair automatically. You can do a factory reset via WIDI App: www.cme-pro.com/cme-widi-app-online-start-guide/#tve-jump-18c7652b0f7 Make sure after you connected each WIDI device to WIDI App for the factory reset, that you remove your WIDI devices from your mobile’s general Bluetooth device list, or turn Bluetooth off entirely, to avoid unwanted auto connection with your mobile device. Also, make sure your WIDI devices are set to ‘auto’ in the BLE role section, as it is set by factory default: www.cme-pro.com/cme-widi-app-online-start-guide/#tve-jump-18c7650cd45 Once you taken care of the above, they will pair automatically: www.cme-pro.com/widi-master-start-guide-bluetooth-midi/#tve-jump-1834a88fdb3 If you want to create a fixed pair, a way to ensure one WIDI us always connected to a specific other, useful when working with multiple WIDI pairs, you can use the group function of WIDI App: www.cme-pro.com/widi-master-start-guide-bluetooth-midi/#tve-jump-1834add1fd2 If the above was not helpful, please do reach out for personal assistance: www.cme-pro.com/support/#tve-jump-183922d36ae