I wouldn’t take another lifetime kayak if it were free. If you ever need a replacement part they really bend you over.
@BevansMotorsportАй бұрын
any more updates on this
@houdini8o83 ай бұрын
how long did it take to cut a cylinder rod?
@esotericpriest3 ай бұрын
Not too long...the chop saw did not like it at all though lol. Invested in an 8×13 bamdsaw and it doesnt even blink cutting the rod or the forklift tines.
@pg91124714 ай бұрын
That's cool building a similar one but the snowblower I'm using only has forward no reverse.
@esotericpriest4 ай бұрын
It will haul a lot just not the easiest to turn. Ive had 500lbs on it and forward and reverse no problem but turning is easier if you have someone in front helping.
@pg91124714 ай бұрын
@@esotericpriest oh, if you take the keyway out of one wheel or free it up somehow. It will the be easy to turn. Maybe you can drill and put a pin through both wheels so you can have the ability to switch wheels.
@dragonwelder29044 ай бұрын
It only weighs a ton.. 🙄🙄🙄
@estalt9574 ай бұрын
I think Toyota Tundra will pull out chevy
@ximan095 ай бұрын
Nice build. Could save some elbow room by placing the pump on top?
@esotericpriest5 ай бұрын
Yeah on my third build which I posted a couple days ago I went back to air/hydraulic. Cylinder retracts so much faster for some reason. The new build I posted a couple days ago is by far my favorite design so far. Will keep building and tweaking every time. But the new design is very close to being perfect for what I like.
@matthewarnold85385 ай бұрын
Only have 5ton winch with two pulleys works for me
@sonigokuu5 ай бұрын
And it appears the newer Chevy is equipped with 4-wheel drive. That's what's funny.
@starwazfan5 ай бұрын
Can you post what all of the parts cost and dimensions of materials
@esotericpriest5 ай бұрын
I sourced most of the new steel from left overs from local salvage place...had about $300 in the steel. The roller were amazon like $20 for 10 so have enough for 2 more presses. The pump and cylinder were like $460 Vevor brand and the hoist was $130 Vevor brand. Saw blades annular cutters cutting fluid and misc hardware were approximately another $300. The casters were another salvage find got a great deal on them. The cable I already didnt use the original the cable clamps I already had. The I beams were 6x6 with 3/8 flange the top and bottom plate were 1/2 flange so I doubled them up with 1/2 plate for 1" total thickness. It was just over 6ft tall and the legs were 32" wide to be able to fit through most doorways. The total width of press was 4ft with 3ft table and roughly 24" of horizontal travel. The plate the ram pushes against was layered 1/2 plate to total of 2" thickness with the front cover plate and back cover plate 1/2 thick welded on a 90° to bolt the roller wheels to. Roller wheels also Amazon for like $15 or something. All in I figure I was around $1000 because even though it was slightly more than that I have things left over that I will not have to buy for the next press. Which I plan on starting soon. Got a big belt grinder Im refurbishing and when its done will start on the next press. It will be a little different design. Saw an Enerpac design that I really like and I believe will be a little easier to build.
@esotericpriest5 ай бұрын
I think I covered all your questions...if not let me know. Happy to answer anything I can!!!
@esotericpriest5 ай бұрын
If you count the mag drill and dry cut chop saw through in another $700 but I had those already.
@esotericpriest5 ай бұрын
Oh and the pins for the table also slavage. They were pins from catwalks for oil platforms. Dont remember length on those but cut to be symmetrical same out the back as was out the front.
@esotericpriest5 ай бұрын
The press plates were just 1x3 bar stock that were cut same width as press table which I think was 12" total. 6" working gap and 3" flange on both sides.
@MastourAbderrahmane6 ай бұрын
Toop
@MastourAbderrahmane6 ай бұрын
Toop
@RustyInventions-wz6ir7 ай бұрын
Wow. That is a big one. Very nice press.
@esotericpriest7 ай бұрын
Thanks....not an engineer but Im pretty sure it would support a 75 ton cylinder based on the 75 ton presses Ive seen for sale. I will be building a press brake attachment for it soon as well as giving it a coat of paint.
@esotericpriest7 ай бұрын
I have since cut the pins to correct length as well as ground all the paint off them and sanded them smooth. Also gave the end that is inserted a round over blunt tip to make inserting easier. Table raises and lowers super easy without any of the press plates on it. The press plates add anouther 100lbs so I will just set them off whenever I need to raise or lower the table.
@martybillich54307 ай бұрын
Look up building tool bench
@esotericpriest7 ай бұрын
Ive got like 30+ foot of work/tool bench...got junk piled up on it from using different stuff to build this but pretty good on bench space. Unless there was a specific build you are refering to....
@mikebauer45417 ай бұрын
click bate
@petewoodsteelstone28568 ай бұрын
📝🗓📐📏📎⛏🛠⚔⚙🗜⛓🔬🔭🩹🛒 that took a bit a doing ...nice job man !
@nannesoar8 ай бұрын
That's taking things to another level in more ways than one👍
@esotericpriest8 ай бұрын
Thanks!
@jimjarvis57569 ай бұрын
Looks good, Son. You might think about putting a latch on it so that it won't dump by accident.
@esotericpriest9 ай бұрын
Thats a great idea dad!!!
@brodietheboss14189 ай бұрын
chevy sucks
@ubroc Жыл бұрын
Did you use a weed wacker for a motor?
@esotericpriest5 ай бұрын
I used the 35cc motor of a weedeater mated to a small outboard leg.
@ubroc Жыл бұрын
Short and too the point.
@Robbie88 Жыл бұрын
Find new roads
@jonschroedinger8360 Жыл бұрын
Nice. Doing a similar mount but have to make it modular for weight reasons (have to store it in a basement and carry it up steep steps). Gonna use some mighty mount t-track, have two cross beams, then run my angle iron back to a cross beam in the rear that will be strapped down with strap-specific padeyes. Theb of course the L-brackets for the transom. Hopefully it works as well as yours
@esotericpriest Жыл бұрын
Sounds like you have a good plan in mind. Im sure it will work out well. Wish you the best! Post a video and tag me when you get it done would love to see your mods!
@guitarhole Жыл бұрын
I hope that Jeep has a different driver . I'm sure any 2wd could get through this .
@bobbydelamar606 Жыл бұрын
Ford did it all first. Mustang before Camaro. Bronco before Blazer. Ranchero before El Camino. Best selling and towing year after year.
@bobbydelamar606 Жыл бұрын
Find new roads, cause we don't want you on ours.
@bobbydelamar606 Жыл бұрын
Find new roads, cause we don't want you on ours.
@traciweisenbachCITB2 жыл бұрын
ford and dodge suck dick! Chevy Is The Best!!!
@danemmerich67752 жыл бұрын
How about a picture of the motor mounted? Please
@esotericpriest2 жыл бұрын
Sold that rig...sorry bud...it worked great though my wife especially liked it lol...got a "lower unit" from Kayak Buddy out of Florida and put it on a 35cc Honda 4 stroke trimmer head and it worked like a charm...run you about 6-7 mph...
@briankuhn89972 жыл бұрын
What model # of that upgraded seat did you use ?
@esotericpriest2 жыл бұрын
I dont remember man Im sorry. It was an extra wide stadium seat got from walmart in store.
@fernandocarrillo20222 жыл бұрын
Later on they found out they had the parking brake on
@unknown_40242 жыл бұрын
Thank u my brother I’ve got the exact kayak been trying to find a way to mount my trolling motor around that hump on the back of the kayak ur video was exactly what I needed appreciate it
@esotericpriest2 жыл бұрын
No problem bud. I was hoping it would help fellow diy'ers. And if you have a scrap yard close its super cheap to source the tubing and channel. Have fun and stay out there!!! Glad I could help!!!
@scottnichols90202 жыл бұрын
I built my own removable winch mount myself and It is very strong and Solid . and I built my removable winch mount front harbor fright items
@franklocasio28482 жыл бұрын
Chevy needs to stop dick riding ford... everything ford comes out with something new Chevy and dodge copy it...they can never come up with their own stuff 👎
@davidholland56192 жыл бұрын
Who doesn't enjoy mounting a wench ooos winch I meant
@1979augistine2 жыл бұрын
Looks like you gona need a 45 degree pice of square tubing on the upright , I bet that moves and flexs alot when you pulling on the winch
@BigBootyJon2 жыл бұрын
Console moment
@JamesWide2 жыл бұрын
Ok. Question for you man. My trailer is absolutely identical looking.. the Tongue, the a frame, everything is identical. The Big question here is.. what brand is that trailer?? I'd love to know
@esotericpriest2 жыл бұрын
Idk bud. I bought that off a friend years ago. It was in the middle of a field on his property with trees growing up through it. Had to clean it all up and repaint/redeck it.
@Fin.mint.2 жыл бұрын
I hate Chevys, but this is a weird situation. I'm very surprised it got stuck to begin with, then couldn't be pulled out.
@traciweisenbachCITB2 жыл бұрын
I hate ford and dodge. Chevy is the best.
@kunglee34572 жыл бұрын
I just need your cp that's all. Good tanking
@esotericpriest2 жыл бұрын
Will check cant remember off the top of my head. Will check tomorrow when I log in.
@iuckyttv62352 жыл бұрын
Fuck u Chevy Silverado is the best truck duramax gang
@chrno22 жыл бұрын
Build?
@esotericpriest2 жыл бұрын
I was wearing Battalion Defender body Malabeth the Scourger monster helm set and Crest of Cyrodiil snb frontbar with ice staff back and jewelry. All health enchants on body and shield. With defending backbar enchant. The jewelry had block cost reduction enchants. Cp mainly toward self healing and blocking. Built specifically to run with a bomber or be a res machine for a larger group. This built was even strong enough to fend off the hammer until he figured out he couldnt kill me. I got the front bar skills setup for max defense. Got the heal ghost, beckoning armor, hungry sythe, lingering flare and defensive posture from snb skill line. The ghost takes 10% of your damage lingering flare reduces damage taken just being slotted and defensive posture increases the amounth you can block and decreases block cost.
@esotericpriest2 жыл бұрын
Ive got the necro purge, ele drain, braided tether, necrotic potency and detonating syphon on backbar. Ive got pestulent colossus on front ulti for group help and the necro res ulti backbar for group help. I though about front barring the necro bone colossus ulti but this build can already withstand a MASSIVE amount of incoming damage. I will play around with it more and see what I like best. But as you can see it takes like 15 hard hitters swarming you to bring you down. The biggest thing that I have found out from limited play time is before buring out all your stam and swapping bars keep a little because a sorc streak is a stun that cant be blocked and if you dont break free fast with that many people on you you can be killed faster than you might want so I suggest not going below a quarter stam before swapping to block on backbar. That way you always have stam to break free from a sorc streak.
@esotericpriest2 жыл бұрын
And running tripots and smoked bear haunch food. Think I had 45 points in health and the rest in stam.
@chrno22 жыл бұрын
@@esotericpriest ty
@esotericpriest2 жыл бұрын
Magsorc is pretty stable regardless of the patches. You will need to farm new gear almost every patch but sorc is always strong and the rotation is pretty close to the same most of the time. Sorc is my main then stamplar...stamplar is a very easy class to play and a super easy rotation. Also easy to solo stuff with.
@esotericpriest2 жыл бұрын
Its mostly dynamic. Pre buff with both pets, lightning form, trap, atronach ulti then wall. Then spammable daedric pray and keep up wall trap deadric prey lightning form and volatile familiar as they fall off. This was one of my first parses back after 8 months no play time. It will get better for sure. Plus I only had purple jewels and no bashei
@vacz61132 жыл бұрын
hey! im making myself a magsorc and researching rotations that will do the job for most content, what is this rotation?
@lwinny55432 жыл бұрын
Found On Road Dead
@bobbydelamar606 Жыл бұрын
That's all a simple Chevy owners mind can think of. Cracked Head Every Valve Rattles Oil Leaks Engine Ticks