Glad you like it. Happy Halloween!

@@ginaartsgallery Happy Halloween to you too 👻

Make some and paint different colors will be fun

Hi! You could try taking the light component apart and readjusting the wires and battery, as it could just be a faulty connection. Hope this helps you, if not please ask again ☺️

@@ginaartsgallery ohh thank you so much! :)

You may watch 2:36-12:55 for the gear part

Normally I would start with the testing if the usb is working.

They come from a kit

Glad you like it

Thank you

Bonjour, lampe de nuit miroir tulipe

It often depends on how frequently the lamp is turned on. If it uses standard AAA batteries, it can typically last anywhere from several hours to a few days of continuous use. However, for intermittent or occasional use, the battery could last much longer.

Two way

@@ginaartsgallery this glass length?.. Cm?

10cm

@@ginaartsgallery There is nothing to gain here

Tulip flowerhead, Tulip leaves ,Crystal beads ,Glue stick , Anti-collision corner /silicon corner pad,Light strip /fairy lights,2-way mirror

It is come with a kit. You can find it at Amazon.au or Temu.

Thank you my friend❤ I can't find this mirror any where 😢 What is the real name of mirror? ​@@xynabzander4993

I used a round battery, use it according to the size of the in the kit. I am unsure how many Amperes it requires.

@@ginaartsgallery damn thats fine but whats the voltage of battery is it 1.5v or 3v or 6v or 9v just tell me this. and how many batteries it has at a time 1 or 2 or 3

Glad to hear that you like it! I am improving every day!

Wax makes gears and parts working smoothly. You can use candle. It is easy to get.

Some of the cheap kit on the market are low quality. I don’t recommend any kits price below 15 dollars.

Most of the reason why they won’t turn is the plastic nut is too tight.

@@ginaartsgallery Okay thank you!!!

Thank you ☺️ your kind words are much appreciated.

You can twirl the remaining wire around the base, it will create a better effect on the tulips. Hope this helps ☺️

Hi there! Thanks for reaching out! It sounds like the big brown cog isn’t fully aligned with the smaller ones, and that could definitely cause some issues. Here’s what I recommend: Check Alignment: The large brown cog needs to be properly aligned with the smaller ones for smooth turning. If it’s slightly off, you may need to loosen it and carefully readjust its position. Ensure it's centered and aligned with the new smaller gears before tightening again. Inspect for Wobble: If the big brown cog is rickety, it may not be seated properly on the shaft. Double-check that it’s securely attached and that there’s no excess play or wobble. If needed, you can remove it and carefully reinstall it, making sure it sits flush and tight. Review Step 4: You mentioned the difference between yours and mine at Step 4-this step is crucial for the proper alignment of the gears. I’d suggest revisiting that part of the assembly and ensuring everything lines up as it should. Go Back if Needed: If things still don’t seem right, don’t hesitate to go back a few steps to see if anything was missed. Fixing these issues early on will prevent bigger problems later in the build. Take your time with it! I know it can be frustrating, but getting the gears to turn smoothly is key for the whole project. Feel free to let me know how it goes or if you need more help. You’ve got this!

Hi! As the lotus increases like 6,12,18 stitches in each round resulting in consequently 3,6,9 petals, I would recommend increasing in increments in 6. Like round 1, 6 sc, round 2, 12 sc, round 3, 18 sc, round 4, 24 sc… etc. increase the rounds until you reach the size you are happy with, hope this helps!

You could also use thicker wool which would give you a bigger flower using the same pattern ☺️

The hook I am using in the video is 2.5mm 😃

You could try switching out the batteries! Let me know if it still doesn’t work 😉

Yes, after each slip stitch that finishes off the previous round, start the next round with ch 1 and then continue each petal. Sorry for the confusion hope this clears it up for you ☺️

​@@ginaartsgallery Thank you so much! ❤ i have already made a mini water lily thanks for you tutorial ❤️ does a medium water lily have a different pattern?

Thank you for your support! I have replied to your recent comment. Hope it helps!

Hi! If you were to print out the picture make sure it is double sided so that when it reflected in the infinite mirror it would reflect back the same image, this idea should work!

You could also have a look at my other video titled “DIY infinite tulip mirror light” which may give a clearer idea of how this idea might work ☺️

I find it at Amazon.au

Yes you can. Or you can just buy the kit for around 15 bucks. That would be easier.

@@ginaartsgallery thank you ☺️

Thank you so much! 😊 I'm really glad you liked it. I enjoyed experimenting with colored sand, and I’m happy to hear you appreciate that detail. It adds a unique texture to the piece, and I find it easier to work with than glass powder. Thanks again for your kind words! 💖

Glad you like it!

5v=10w=2amp I think usb cord will damage the light

If gemstones or colored glass are used, the pieces need to be cut or ground into the shape of each cloison.

It is a very good idea

yes

Hi! I would recommend looking at my other video “DIY infinite tulip lamp” to see how the photo might work out in perspective. If you were to print out the picture make sure it is double sided so that when it reflected in the infinite mirror it would reflect back the same image!

Thank you. I am very glad that you like It.

around 10cm*10cm*10cm

Hi, could you tell me where I gave misleading steps in the video? Would love to improve on it for my next video.

@@ginaartsgallery the way you inserted the tulip from lines it always tend to fell down instead you can directly put all tulips from one end and rotate the wire as u said

You can search the tulip lamp on Amazon.au. They come with kit. So easy!

Search “robotime”. You can find it on their official website. They deliver worldwide.

@@ginaartsgallery ohh thanks!! ++ gd work! I really enjoyed watching the video

Amazon.au. Come with a kit

Thanks for the comment. I made quite a lot of RORK products in my channel. Hope can help you.

thanks

you can use a flat head screwdriver or use the knife blade to remove the P11 .