Those brushes and diamond sharpener file would be great for upkeep of the Victorinox in my main pocket. 😂 The protractor and comb might be nice to have as well as extras but that's about all I would go for.

also you're doing fine, I didn't realize you just started doing this, you have a good narration voice that's not monotone. you don't waste time - you're on the right track, I can tell you've definitely watched a lot of these types of videos like I have lol good luck

I'm interested because of the comb but I don't know about getting oil in my hair lol

Great tool but agree 100 percent - pocket clip is the weakest part on this. Def needs to be slightly longer and not taper.

Thank you for the video and the support! We truly appreciate it! ☺

D2 is a tool steel. It has a moderate hardness, good edge retention, and is good at resisting corrosion. Most Chinese companies used to use 18crMOV which is trash

Excellent review! Thanks, David Martin Jacobsen

Wish they would print the grit numbers on the rods themselves

Like the idea...but I think the look of it is terrible.

День добрый Дэвид. Сделайте обзоры у себя по камням как искусственным так и натуральным было бы интересно посмотреть.

Helpful demonstration of the system. Thanks!

On a basic level this this is a good video, but I like how deep it gets referring to tools as “a piece of art”.

Hello. Wire cutters in my "Sailor Pro" are replaceable. I was quite surprised. Great reviev btw.

I went to Lowe's and bought 1/4-20 x 3/4 in flat phillips machine screws to replace the hexagon shaped screws that you needed the allenwrench to tighten the screws. Now all I need to tighten the clamp is a phillips screw driver.

Is there an adapter that can be used to sharpen scissors?

Fantastic review. Much appreciated. How would you compare this to the Xarilk Gen3 that you recently reviewed? The system you show (the version without the pedestal stand and included stones) is selling for about $234, while the Xarilk can be had for as low as $79 right now. Do you think this system is worth 3 times the price? For reference, I'm a complete rookie and don't own any crazy high quality knives. Mostly chef style knives under 60 HRC and angles between 8° and 20°. I'm doing basic home cooking. Just looking for a decent sharpening system and was going to get the Xarilk Gen3, but wondering if this unit would be worth the extra price or just overkill for what I need.

You need a microbevel on the apex around 2 degrees higher than the edge. So if your edge is 20 deg. use a ceramic honing rod on it at 22 deg. Amazon sells ceramic honing rods with plastic guides to help you get the angle you want. I just got one and it works great to get that next level of sharpness you (and I prior) didn't know we were missing. I guess you could try using your highest grit stone at 22 degrees (or sharpen at 18 and microbevel at 20 if you want). But you have to use a feather light touch. Good luck!

Do you think this unit would be capable of sharpening a chef knife with a recurved style blade? For reference, I'm specifically referring to a knife like the Dalstrong Gladiator Series 7-inch Barong. (I'd leave a link, but KZbin won't allow it.) Thanks for a great video!

Good demo! It’s surprisingly similar to my Kadet Pro that cost 6x more. A wrap of kapton tape will firm up the grip of the clamps without the wiggle of rubber. What size are the clamp screws? A knurled or T-handle wrench should provide enough torque to adequately tighten the clamps. What is the diameter of the rod? Curious if other stone holders (like Hapstone) will fit to allow two-sided flat ended stones like Venev. Thanks!

This system punches well above it's price range

WIll the stone holder accept dual sided stones like the Venev Centaur? Thanks

How are the locking mechanisms on the rotation bar and the angle set, compared to the TS Prof?

Do you know if this unit acepts the TSPROF stones?

I like mine

Do you know if this unit accepts the TSPROF clamps?

This size is great compared to the rest of their models

thumb stud version should be available soon :(:

I suppose the reason for combining a pry tool and a utility knife in the same tool is so that it can be used to open large packages which are both stapled and taped shut. Some other people mentioned that the locking button fell off their older Prybid Utility tool. I hope that won't happen with this updated version. Thanks for the review. MTO is a great forum.

I’ve got the same one. I like it

Are they shipping out Flex's to influencers only first?

I bought one of these for around US $20 here in Indonesia. I like its size, not too big and not too small. The main blade is very sharp and the scissors cut through not just paper but also cloths, paracords, cardboards, etc. I haven't tested the other tools yet. But overall I'm satisfied with it as far as price and quality are concerned.

I was hoping that I was wrong and that this multi-tool doesn't actually require unlocking to open. At its price I like almost everything else about it. It looks cool, has a solid tool-set, and all outside-opening tools. But every time I pick it up that lock drives me nuts and I put it back in the drawer with the 10 or so other multitools gathering dust. Great review!

Add me

I got mine this week. Haven't had a lot of time with it yet but pretty nice. I bought a bunch of the blades that I thought I would like and the ones I have tried are pretty good.

How much does it weigh when all decked out?

Glad they got one to you guys

It would be a great idea if they were using decent steel for these. Theyre using 2 and 3crmov and the most expensive knife they have is 8cr13mov. Which is fine. But the screw driver being 2cr isnt giid enough to turn a screw without breaking. 3 cr is basically stainless steel used for making pots. Or pot metal. It isnt fit for tools. All the tool should be made of 420hc or 440c. The knife should be made of d2 or 14c28n, same with the saws etc. And then yes. It would be expensive. But it woukd be usable

Thank you for sharing🎉🙌👍

Very good review. Did you find that moving the clamps to one side to sharpen smaller knives, instead of using an adapter wasn't a good way to go ? I am debating between the TSprof Pioneer and the Hapstone RS. Since you own both , if you could only own one, which would you choose ? (price is not a consideration for me) Thank you in advance.

Shit knife. I had one a year or two ago and the scissor mechanism broke. Just buy a branded knife.

I hope the 1/4 bit holder can take wiha double sided bits 🙏

Great review - thanks.

MaxLvlEDC shows how to get 4 long tools loaded into this!

Nice little knife! I just bought the pup with the white G10 scales, black blade and hardware. It should be here in a couple days. I’ve been watching too many videos, going to attempt to dye the white G10 to a black to grey fade. Can’t wait!

Any special kind of utility blades you need…or scalp blades…? I think they come in different numbers sizes??

Thanks for the comparison.

zip 31513 Seriously guys, black out all the numbers and/or bar codes of packaging on your videos.

👍🏼I do like the swap mechanism but overall I’m liking the GOAT appearance and tools. I don’t do alot of swapping now that I have things where I want them so the “better” swap mechanism doesn’t really matter to me. I do often take out my craft blade and use it individually. It’s a full length long tool. Plenty to hang on to by itself. Along with 3 other long tools. 🙂

So, love the direction of fully configurable but will stick with my Bibury dedicated tools and swapable t-shank on one for now. Fantastic innovation but needs time to mature an Roxon have taken a big leap in reducing wiggle issues over GOAT. But big to them for going first into a new multitool era

Wow, so much unrealized potential here! - Leatherman, why can't you offer us a truly custom mix of tools? You have the idea but not the execution... - That hobby/surgical blade holder is dynomite! - That scraper/chisel/wire stripper looks really useful, in ways I don't even yet know- that's the kind of multi-function we really want from a multitool blade!! - Nobody can beat the SAK awl/reamer blade- it's just a perfect, multi-function tool! Leatherman, side-eyes here... This awl/reamer is on steroids, and not necessarily in a good way... - Everyone else has figured out how to combine a bottle opener with a can opener (super useful for more than just those two functions) but these guys haven't... Yeah, this great idea just makes me want more from Leatherman... SMH