Same dryer as mine. It's so old, but with help from you, it'll keep running for years to come. I got a quote for repair, and was going to be charged over $300. Got the kit for $35. Even got the drum roller kit to while it was already torn apart just to kill two for one while already torn down. You're the savings god, brotha! Thanks big time.
@JasonSipe1614 сағат бұрын
Too expensive and wasteful to not try to fix it yourself!
@bebeslife451915 сағат бұрын
I have a similar motor that’s a ten horse. It has ignition points under the cam pulley. I can’t get it to spark.
@michelleclardy9977Күн бұрын
Any ideas if you changed all those parts and still no heat?
@JasonSipe16Күн бұрын
Did you check continuity of it all the way through the circuit?
@michelleclardy997710 сағат бұрын
@@JasonSipe16 We did! We have changed the thermistor, thermal fuse, thermal fuse cut off, and the heating element
@JasonSipe164 сағат бұрын
@michelleclardy9977 hmmm, did you check with the multimeter to see if there is actual power getting to it? You would need to have it plugged in and turned on
@noahlutgen8492 күн бұрын
Hi jason i just upgraded to a sand filter and dont want to get electrocuted in the pool haha do i need a special adpater for an outlet or a special extension cord because the pumps cord is very short and doesnt reach my outside outlet. Any help would be great thanks!
@JasonSipe162 күн бұрын
Good question. You'd be more likely to get shocked if the extension cord connects to the pump in the yard. It has a gfci, so if tjere is a short circuit, it will click off.
@nem173 күн бұрын
Hi Jason, For some reason i cannot open the top part its too tight (on your video 7:28). i tried with channel lock and added some WD40 to loosen it up but still nothing. Do you have any other suggestions?
@JasonSipe163 күн бұрын
Wow, not even with Channel locks? You can try to hit it with a hammer to loosen it a little bit
@HIFI19658 күн бұрын
Dude. It’s a great video, but you need to include a kill switch.
@JasonSipe168 күн бұрын
Not sure if you watch till the end. There's a kill switch
@Lowgarr8 күн бұрын
Thank you, very helpful.
@JasonSipe168 күн бұрын
Thank you for watching
@trisaddi19 күн бұрын
We followed your instructions and it worked!! Thank you for posting this for people like me!
@grundyo9 күн бұрын
Sorry You are correct, I was wrong , i only ordered my pump last night 🤭🤭
@grundyo9 күн бұрын
I thought you were supposed to keep the cap on when back washing for 5 minutes then take it off when you switch it to rinse to rinse the dirty water out after the back wash 🤨
@chriswenzel332810 күн бұрын
Is there any way yo do this using only one remote? Amazing work.
@JasonSipe167 күн бұрын
Yep. You do it with different remote switches and get a 4 button universal. I talked about it at the end of the video.
@markhastings23610 күн бұрын
Thank you so much as it had me stumped! #@%$@#, ... supply and demand now have a 2 pack down to 9.99 on Amazon "2PCS Replacement Gasket Compatible with Ryobi 18v Stick Vacuum Cordless Dust Bin Lid, Canister Missing Seal Attachments for PCL720, PBLSV716, PBLSV717, Silicone Brand: MITCHENIFY"
@gowjer11 күн бұрын
Thanks for the video. Greetings from the UK
@JasonSipe1610 күн бұрын
Thanks for watching! And hi!
@rolnikzkorpo535211 күн бұрын
Anyone tried to use some grease on the shaft? Next time I will have to disasemby it, I'm going to try some bearings grease.
@JasonSipe1611 күн бұрын
The shaft is all submerged, and it and the impeller needs to be replaced every once in awhile.
@rolnikzkorpo535211 күн бұрын
@@JasonSipe16 I'm trying to understand which items are stationary and which are rotating. There is shaft/axis made of metal or in some pumps ceramics, there is magnetic impeller, spacers and the rotor that moves water. The noice made by the pump must be generated by axle play in the rotor socket and rotor vertical vibrations. That would indicate axis to be stationary and spacers being responsible for transfering impeller rotation to the rotor.
@user-qe9bz1kv7z11 күн бұрын
What servo was used? I didn’t see a link?
@JasonSipe1611 күн бұрын
Good question. The link to the motor is in my description. It wasn't a servo though.
@burkex1111 күн бұрын
Am I to screw knobs on top tight or loose
@kathyboshart769512 күн бұрын
Thanks for this video! I lost my gasket in the trash, but when I put it back in, it was backwards. I flipped it, and my vacuum works again! Thanks for sharing!
@JasonSipe1612 күн бұрын
Always glad when it helps!
@nathanielgarden254312 күн бұрын
Genius! Where do I buy the rubber?
@JasonSipe1612 күн бұрын
There should be an Amazon link in the description for the type of rubber I got. Or you can check foam factory.com
@johnhorsley792814 күн бұрын
I would like to say thank you.
@JasonSipe1614 күн бұрын
more than welcome!
@morganflick265614 күн бұрын
Hello! What model was this furnace?
@multitoolman808514 күн бұрын
Racoons can't open that door?
@JasonSipe1614 күн бұрын
Not the ones in our hood.
@e_thegod530314 күн бұрын
my pull rope is good but the GUIDE that HOLDS the rope on the side, that latch broke off. how could I replace or rig that? zip tie? metal loop contraption?
@JasonSipe1614 күн бұрын
Not sure. It might just be easier to buy the part for that. Sometimes you just have to buy a part.
@e_thegod530314 күн бұрын
@@JasonSipe16 mannnn that sucks lol 🤣 it was cheaply made too .. but thanks .
@JasonSipe1614 күн бұрын
@e_thegod5303 sorry to break the bad news. But, at least you're getting it fixed cheaper than buying a new mower! The part I have listed in the description might work for you
@richarddomsicz67015 күн бұрын
How many gallon per hour are these pumps?
@JasonSipe1615 күн бұрын
800 to 1000 gallons
@map153715 күн бұрын
13 min video for this come on dude
@rafapz234715 күн бұрын
Can you attach a garden hose to the pump so the water from backwashing gets directed into a bucket?
@JasonSipe1615 күн бұрын
You attach one of the filter pump hoses
@rafapz234715 күн бұрын
@@JasonSipe16can you please make a video showing it
@JasonSipe1615 күн бұрын
Sorry, working on other videos. Just take one of the same hoses you have for the filter and attach it to the backwash port where the water is coming out.
@pixelkrabbe16 күн бұрын
thanks from germany!
@JasonSipe1615 күн бұрын
bitte
@charlesroberts628416 күн бұрын
How long will the battery last with a 40lb troll motor
@JasonSipe1616 күн бұрын
I got 4 hours on high
@raquelespino987416 күн бұрын
Greatly appreciate your video!
@JasonSipe1616 күн бұрын
Good luck! Thanks for watching!
@thomaswoodruff237718 күн бұрын
Good info but a lot of wasted time.
@JasonSipe1618 күн бұрын
Sorry it wasn't perfect. Thanks for watching.
@tonydetailing0819 күн бұрын
Hello sir, I have a new batch of polishing machines recently. Would you be interested in helping me test them?
@JasonSipe1619 күн бұрын
Are these polishers operated by lithium batteries? My business email is [email protected]
@tonydetailing0819 күн бұрын
@@JasonSipe16 Sure, They also come with foam pads and other accessories. I will send you an email and show you our product in catalog.
@rogerpedrosa185419 күн бұрын
👏👊✌️
@JasonSipe1619 күн бұрын
Full Lithium Battery Video Here: kzbin.info/www/bejne/mHvcdZ2cjNZgkJY
@JasonSipe1619 күн бұрын
Here is the Full Video: kzbin.info/www/bejne/fKfPqnqloqh4o7M
@JasonSipe1620 күн бұрын
Watch full DIY video on how to charge a Lithium Ion (LiFePO4) Battery: kzbin.info/www/bejne/mHvcdZ2cjNZgkJYsi=IhgZIkhrRPDDkH0x&t=239
@missamylynne8620 күн бұрын
I'm pretty sure mine is probably power related, it just got working one day. Any advice?
@JasonSipe1620 күн бұрын
Do you mean "it just quit working one day"? If so, it could be a bad gfci plug, or you might need to take the filter out and look down and see if the impeller is rotating at all.
@JasonSipe1620 күн бұрын
Like or Leave a Comment! Products referred to in this video: -Dedicated Lithium battery charger: amzn.to/4cUDmm9 -12v 100ah Trolling Motor Battery on Amazon (with a $30 Coupon): amzn.to/3Y4Lo76 (These affiliate links will take you to products that, if you purchase them, they will send me a VERY SMALL commission which helps me make more videos. Thanks!)
@JasonSipe1621 күн бұрын
Full Instructions on how to set up and backwash a Bestway Sand Filter Pump: kzbin.info/www/bejne/eaiXaHx3mdmsqMk
@xenomorph729922 күн бұрын
how long does the battery last on different throttles?
@JasonSipe1622 күн бұрын
About 2 hrs full throttle 5 (100%), but can be longer with no current. 3 hours at 4 (80%). A lit linger with Lithium. See my newest video.
@zapaholic22 күн бұрын
Nice score! Are you going to do endurance comparison tests between the 2 batteries? That seems like it would make a good video. BTW, keeping a lithium battery at full charge for long periods isn't the best practice.
@JasonSipe1622 күн бұрын
Agree! Definitely in the planned lineup!
@zapaholic22 күн бұрын
@@JasonSipe16 Cool!
@user-vv1hc1zd4c23 күн бұрын
Problem is no matter how well you take care of it or how many fixes you know for troubleshooting.. it doesn't fix the problem that they are made cheap and the motor slows down after a few months of running. You have to replace yearly or get a better quality pump. I suggest building one.
@omgbrytt23 күн бұрын
Wow I thought this noise was bad. Ok guess I’m good then
@JasonSipe1623 күн бұрын
Oh, it's not a pretty pump.
@omgbrytt23 күн бұрын
@@JasonSipe16 luckily the pump is simple I just thought it was supposed to be silent! So when noticed the noise I ran to KZbin ! Thanks! I also do that with my filters too btw. I throw em in the washer after tho 🤣
@jesstamayo15723 күн бұрын
Watch it 1.5x
@JasonSipe1625 күн бұрын
Watch How to Fold up, Measure, and Install a Bimini Boat Canvas Top for an Aluminum Bass Boat, Jon Boat, or Pontoon: kzbin.info/www/bejne/rXzTepSprpWpd7csi=QGP8i5Nqubxw0e8Z
@JasonSipe1625 күн бұрын
Watch How to Fold up, Measure, and Install a Bimini Boat Canvas Top for an Aluminum Bass Boat, Jon Boat, or Pontoon: kzbin.info/www/bejne/rXzTepSprpWpd7csi=QGP8i5Nqubxw0e8Z
@bpleitez26 күн бұрын
Hey man, thanks for making this video. It saved me hundreds of dollars.
@JasonSipe1626 күн бұрын
Great to hear!
@chiplewis779326 күн бұрын
Could you please post the link for the hose. I appreciate your video..thank you
@JasonSipe1626 күн бұрын
Here is an Amazon link to the hose I bought: amzn.to/3FJRte4
@chiplewis779326 күн бұрын
Many thanks!!
@JasonSipe1626 күн бұрын
You bet. Good.luck
@sharonshakespeare823327 күн бұрын
I have this pump and they made it with no way to unscrew the bottom off. I can see the part that needs cleaned through the hole but I can’t access it. So frustrating. They figured it out that we’re just fixing them
@dennisrphymurphy792927 күн бұрын
I have a bubble on mine....I'm not sure if it's a "purge" or "prime" bubble
@JasonSipe1627 күн бұрын
Might be a primer bulb.
@stevecromwell675228 күн бұрын
I had the exact same problem with my Ryobi vacuum and couldn't figure out what was wrong. Thanks to your video the problem was solved.