No, the G12 remote control and receiver are a complete set, it cannot be connected to other receivers

This is a tutorial for flashing Google software to a remote control that doesn't have Google software. If you don't want to use the Google software, just delete it directly on the remote control.

We have shot a video of G20 connected to a gimbal camera. You can take a look. What does TX mean?kzbin.info/www/bejne/gpCbaJulhpWcZ5o

@worldronemarket TX is the wireless camera transmitter back to controller

T10 cannot be operated as shown in the video, because T10 can only connect to serial port cameras. If you want to operate the same as in the video, you can only use a remote controller like Skydroid H16 that can connect to Ethernet port cameras.

No need to change the hotspot IP of the remote control,You can read his manual.docs.cubepilot.org/user-guides/herelink/herelink-user-guides/share-video-stream

The G20 remote controller and receiver are a complete set.

As long as the remote controller supports the Ethernet port, it can be connected to C12, such as Skydroid G12/G20. If you want to know more, you can email our [email protected]

If you need to purchase this remote control, you can contact our sales [email protected]

Yes you can do more with it fly other Drones Helicopters FPV Airplanes !!

You can email our technical support at [email protected] or [email protected]

This can only connect to open source flight controllers. The Potensic Atom 3 is closed source, so it cannot be connected.

Yes

The remote control does not have this statement, because if you need a real-time picture, you need to connect a camera.

1.The operating frequency range of G20 is 2.4G and 5.8G 2.G20 can be used while charging 3.G20 has its own screen recording function 4. He cannot save multiple drones and remote control models 5. Connect to other brand receivers. This involves secondary development. We have not tried it and cannot give you an answer.

​@@worldronemarket So direct!

There is a WIFI setting in the remote control settings. Click it and connect to your wifi.

You can refer to this video content kzbin.info/www/bejne/pJDIqIaudrmqbLcsi=QtRIhkF9AeXOwtXH

Just follow the video to turn on hotspot sharing on H16, and then connect your computer.

You can contact us by email "[email protected]" or "[email protected]" and send us a video of your problem (you can film a video of the process you set up) so that we can better help you.

@worldronemarket thanks but I figured it out. I just needed to update some of the apps on the device specifically Solo TX, and herelink settings app. Additionally, I was having a Wi-Fi issue where I cannot connect to my 5G network because enabling USB tethering seems to change my country of origin and when that changes it was preventing me from connecting to Wi-Fi to allow the updates to work. But it is all working now.

No, it can only show the heat source like in our video

You can refer to this video kzbin.info/www/bejne/apO8oZqhfatkeassi=uMYJMOCC4HwFfx09

You can contact us by email "[email protected]" or "[email protected]" and send us a video of your problem (you can film a video of the process you set up) so that we can better help you.

H16 Pro and ZR10 are connected normally, just like the beginning of this video. The difference here is the flight control. You need to connect the S.bus control line of SIYI N7 receiver to the S.bus out interface on PIXSURVEY A1, and connect the UART 0 or UART 1 interface of H16 pro to the TELEM 1 interface on PIXSURVEY A1. In addition, you can contact us by email "[email protected]" or "[email protected]" and send us your problem video so that we can better help you.

@@worldronemarketTHANK YOU SO MUCH I USE FOR VTOL HERO 2180

I try exactly same connections but SIYI FPV CAMERA IS NOT WORKING

MK15 air unit operating voltage: 25.2 ~ 58.8 V (6S ~ 14S)

Holybro X500 V2 ARF Kit is the product name.

Can be output via the HDMI port on the MK15 remote controller

A2mini is an Ethernet camera. As long as your receiver can connect to an Ethernet camera, it can be used.

You can contact us by email "[email protected]" or "[email protected]" and send us a video of your problem so that we can better help you solve the problem.

This depends on what remote control you are using. For example, the UDP port of Skydroid's remote control is 14551 and 14550. These two values ​​represent the receiver's serial port 1 and serial port 0. You can check the UDP port value of the remote control you are using in the remote control manual.

@worldronemarket where can i find manual idont have one bro

@@worldronemarket i check the manual in the website and i didn't find any port

@@worldronemarket my remote control is skydroid H16

@@b2pyoutube513 This is the user manual of H16. You can also search for videos about H16 on our KZbin. www.worldronemarket.com/skydroid-h16-user-manual/ You can also contact us by email at "[email protected]" or "[email protected]", and send us a video of your problem, preferably so that we can better help you.

The Skydroid C12 is not waterproof so it has no protection level

@@worldronemarket If a few drops of water come into contact with the lens, is it possible to get water and damage the camera?

@@KhoaPham-fd3xz Because the camera itself is not waterproof, we cannot give you an exact reply.

You can email our [email protected] or [email protected]

H30 can be used with SIYI AI II and SIYI cameras.

You can send us your questions by email so that we can better help you solve the problem. “[email protected] or [email protected]”

Hello sir, UniRC7pro can only connect up to two gimbal cameras.

Yes, they can be used together.

hi sir, if you are interested, you can contact my email '[email protected]' for quotation.

Hello, if the C20 and C12 gimbal cameras are connected to the same receiver, the FPV software can only display one. If you want to see the other one, you need to switch the line in the software.

Hi Sir, You can go to the flight control section on our website to choose the right flight control for you 'www.worldronemarket.com/product-category/product/flight-controller/'. If you have other needs you can contact my ermail '[email protected]' for quotation.

C12 it has a wide field of view, clear images, and can observe various heat sources from a long distance.

You can use just one. In the video, we used two to test accuracy.

The receiver of H20 uses S.BUS protocol. Its receiver is just a receiver, not a flight controller.

@@worldronemarket I mean between transmitter and receiver. 2.4 GHz radio protocol that is.

@@davidjacobs8558 Yes, the transmitter and receiver use a 2.4 GHz wireless protocol.

@@davidjacobs8558 Yes, H20 is 2.4G frequency band

The actual range depends on the flight environment, as different environments can affect the flight distance. The H12 Pro has a maximum communication range of up to 10 kilometers.