Thanks for the video. I can't find the video about connecting the gen24 inverter. Can youhelp? Thanks

Unfortunately no joy in my case. Can't get the middle blue line going, therefore no connection.

Won’t work for me. Won’t connect to the solar edge network for some reason

My caravan set up = 2 x 170 amp/hour lithium 12volt batteries in parallel giving me 340 amp/hours they are about 10 years old. 7 x 200 watt solar panels divided into 4 and 3 to go through 2 Renogy separate solar controllers. Panels average about 6 years old. Inverter Lvyuan very important 3000 watt easy start pure sine wave .All wiring pure copper not copper clad aluminum. I power an upright freezer. medium fridge freezer, microwave 1.6 kw Devanti window aircon daytime only ,water pump ,kettle ,toaster lights, computer, clock , electric blanket all night ,fan if i need it. ALL ON 240 VOLTS but not all at once. i will be replacing batteries in the near future so i can run the aircon at night .Would not run aircon without "easy start "inverter

I am correct in that a 10Kw Fronius Gen24 Primo (single phase) that only 3KW is available on outage. Why not 10Kw?

Bro forgot to leave enough room for a backyard. Man new houses suck.

REVISED PASSWORD (it's case sensitive): pw1111

Worked first time, easy instructions!

how about the older version without the buttons.

Ive tried everything, password required to bloody get the thing reconnected. It didnt need one the first time.

Hi. Can't find the Cable Cover installed directly under the SH15T inverter. Is it a custom made cover or a buyable Sungrow accessory? thanks

Those are two 300ah batteries, not two 600ah batteries.

Thanks for the app demo. With the Powerwall 3 having an inverter in it, do you know if it's possible within the app to see what individual panels (or for that matter panel strings) are producing? Or perhaps more importantly 'not producing' perhaps due to soiling etc.

Just looking at the Victron Solar Controller and noticed the grounding screw attached to the heatsink is not connected. I bought the same controller from you guys, and was wondering if that needed to be connected? What happens if you don’t?

inwöda ;-) nice

Thanks so much for this...but after it is connected to wifi is there any way to view the solar settings/performance from an app?

can we please get some data e.g. pre install consumption and winter production amount plus ROI

is there a 600mm clearance on the right of those batts? or is it only a manufactures "recommendation"

I’m trying to add the password as ‘PW111’ but the error message says incorrect password. I’ve been trying to re-connect the WiFi since I’ve upgraded my internet modem but no luck. Please assist.

Terima kasih sebab upload video ini...saya telah tahu cara hendak sambung semula wifi...sangat membantu👍🏼

What I don't understand is how is the peak demand measured? It is over a time period? So, say a 15kw startup surge from a large AC unit won't cause a 15kw demand charge? I am really struggling to understand the 60 minute average for the demand charge for the month :/

If I have solar panels but did not buy the battery power wall can I still use the Tesla app? I bought the panels in 2017 from Solar City & they were bought out by Tesla. I’ve never had an app. Please let me know thank you for your video!

Thankscfor the info. Im wanting to monitor my Sungrow data via Home Assistant, but everything ive found needsinfo i dont know how to find. Do you have any info on connecting to Home Assistant?

Legend, thanks!

How do I connect this to my ecoflow power station?

Guess who won the pissing contest lol, this guy will tell everybody who stands still for 2 minutes that he has 600 amp of lithium and dropped 12-20 k just to run an ac , like all hard core off grinders 😭😭😭

that ip address doesnt work???

USELESS!!!

Crossing over the main battery cable is a huge fail, if those cables ever rub through the insulation you have instant fire.

Could you do the same thing with a Victron System?

ok why did they not get more solar with the extra space? and why not have a battery install?

hey mate very informative video.. loved it.. in the process of learning more..with the Solar being self consumed and not reflected on the bill.. would this be the case with a 5kw inverter system as well with no battery? cheers mate, top tier content

How to proceed if internet provider change in our home?

How safe are these Lithium batteries though? Do many of these big batteries fail and start fires like some of these other lithium battery accidents? Also, how much did that system cost?

Very interesting video. Thanks Eddie and Springers Solar.

Great video thanks

What is energy comparison, and why is it important for Australian consumers?

Great looking installation. Huge fan of the over under installation. Cheers from your friends across the pond at SolarEdge North America!

Thanks good video mate

thank you for starters for this info, but i do recall that all the insytallers are still in ICE when are you looking to convert those to electric?

Nice!

How accurate is this app? I’m showing vastly different numbers from what my electric company is telling me I’m producing and using.

Thanks for the review. You didn’t cover 1 what is the insurance cost vs standard cars and 2 what is the depreciation vs standard cars?

Another fantastic reason to go to Springers Solar for your solar & battery needs. From my personal experience, my opinion is that they have the real world experience and expertise to help you get the best bang for your buck.

Whenever I try this, my browser page after connecting with 192.168.250.181 Looks very different to what you show here, it shows all the data of our unit but there is no setting buttons and everything is locked out saying I need to login as a user or technician but I don't know what the password is and it won't let me change it

You have back up capability on both inverters with the polyphase BUi from Tropac

looks cool but very expensive setup. Just buy a generator....you go off-grid anyways ...no neigbours scream at ya😁

I automatically switched to a demand plan (post-smart meter install) and got my first bill after the switch, and it has skyrocketed. Demand was 107 of the total 164kw. My actual usage between 5 pm and 9 pm is minimal, not remotely close to 65% of my total usage. Thanks for your explanation. It seems that one day of high demand in that period has impacted all 28 days of the bill! So I am charged for a theoretical use, not an actual one. Note no solar, no gas, no battery. Just electricity for everything. Looks I have a plan switch coming.

Just installed a newer inverter It’s not picking up data Any help with this would be nice thank you

Thanks for the great video! Can you show how to change the seasons in the Edit Rate Plan section? Thank you!