@gladiator6154 not on this model. There is a newer model that has detachable earpiece on one side. See what they have in store.

@@yosmerrocamora3052 Encantado de poder ajutar!

Hi. Try removing the memory card first, then restore the GPS to factory settings, without the memory card inside try to update the operating system only, oʻnce that is done, format the memory card, put it back in the GPS and install the maps. Unfortunately it will keep doing this every time you do an update. Now I got mine working after having it blocked a second time, I bought a newer version and I only keep this one as a backup for the following 3 to 5 years.

@@RajinderKumar-mf2bj Happy to help!

@urielhernandezT150 dyslexic speaking, reading and writing in 7 different languages here. I'm bound to screw up here and there! 😅

I no longer have this camera. If I remember correctly, it's 30 seconds to 3 minutes intervals, it all gets stored on the memory card, once the card is full, it starts writing over the oldest recording. My advice is to manually delete the card at least once every 2 days if you have the biggest available memory card, because it can get stuck and not record after the card gets full, and it doesn't warn you.

PS: you can see all technical details on the Amazon listing.

Sorry to hear that. I guess it's time to get a new one!

If it's just the little external plastic cap you can glue it back together. If it's the switch itself... You might be able to find a tv and radio repair shop that would unglue the old switch and solder in a new one on the PCB. Otherwise... Time to buy a new headset.

Aren’t we?

Sorry. I don't have the app. I never got to use this drone because it wouldn't take off. I trew it in the garbage the same day and got myself a different drone that actually works.

I'm sorry but I don't have one of those! I no longer have the headset either.

I read the publications supporting this subject! I won't talk about things I can't verify!

Thanks for bringing this to my attention. I am open to suggestions!

@@handydaddy6634 I am SEO expert, If need help, I will

You scale the truck! Steering Axel in USA is allowed max 12000 LB. Drive axel and tandem are allowed each a maximum of 34000 LB. After you weigh the truck let's say you have 35000 lb on the drive axel and 33000lb on the tandem. This means that you need to move 1000 lb to the back (tandem). Each hole on the tandem pins move between 250 and 300 lb, depending on the model and hole spacing. This means that you need to move about 4 pinholes. So you mark your curent hole, you move the truck in the direction that you need your weight to go, in this case backwards, than you check to see if the pin moved 4 holes from its original position. If it did, you put the pins back in and weigh the truck again. It should be 34000 lb on each axel now, both drive and tandem. The steer axel weight moves a little as well, but it's negligible. For that you move the fifth wheel an you get about 50 lb for each teeth the fifth wheel moves.

Hello and thank you for your comment. You have to plug a USB C cable between the receiver and your recording device. Then turn on both the receiver and your microphone if they are not on already. Then hold the volume down button of the receiver until the light on the receiver turns green. Feel free to watch my microphone showdown and the unboxing video of this in my gadget and unboxing list to learn more about it. The

@@handydaddy6634 Thank You! 🙏🏼

Hello! Thanks for your comment. I can see how at first glance it can seem a little bit complicated but it's not... too complicated😅. Standard rules apply if you imagine a circle inside the hexagon. To further help you, you have the big central hole at the tip of the hours and minutes hands that will point towards the corresponding place on the dial. Speaking of the dial! On the right side you have the hours indicated from 3 to 6 and on the left side you have the corresponding minutes from 37 to 51, instead of the regular 8 to 10 hours marker. Next you have the little ovals with line markers under those numbers. The exterior lines will align with the minutes hand while the opposite interior lines will align with the hours hand. And as a last touch from the creators of this time piece, to help you familiarize yourself with the alignment of all the corresponding markings on the dial ( number, corresponding external line and internal line) the seconds hand will bring all of them in alignment every time it chops over them. All of those features can make things as simple or as complicated as you want them to be and the ability to effortlessly combine these features are part of the smart elegance of this watch.