Outdoor Junkie

Пікірлер

@larrymcmurrin2441 Ай бұрын

If you cut the tire at a 45 degree angle, this may avoid the thump of the right angle seam. You can try Auto Weather Strip adhesive. Its a yellow adhesive that will dry flexible and should bond to both surfaces. Excellent reuse of materials.

@CustomRcGarage 2 ай бұрын

Cool car 👍

@sharadaVJ 4 ай бұрын

Size of the wheels plz

@outdoorjunkie2483 4 ай бұрын

The size of the bike tire I used for 29’s

@DIYglenn 4 ай бұрын

Strange that they don't offer a simple solution like this. A tip could be to use vinyl/rubber glue on the center of the tire.

@holdenrh 4 ай бұрын

What if they won't light?

@DoniJafarsidiq 5 ай бұрын

tutorial for installing engine sounds, boss 🙏🙏

@ThePromiseLast 6 ай бұрын

So lovely… thank you Alhamdulillah

@redrighthandarts 6 ай бұрын

I'm sorry, I couldn't hear you over the sound of your daughter being adorable 😂

@JustinJones-rx7ml 6 ай бұрын

But you had a drill?????? Didn’t use it

@jeffreygreasley8362 8 ай бұрын

Thank you.

@diegooribeiroo6030 10 ай бұрын

Muito obrigado. Graças

@christophermckoy3671 10 ай бұрын

Thank you

@TheLineCrusherPVC Жыл бұрын

This is a great idea, I’m going to take it a bit farther and use twice the tread per wheel so it doesn’t have the high centers on them.

@theaterlightman89 4 ай бұрын

How'd it go? I was gonna go that direction

@kellyschwartz296 Жыл бұрын

So exciting, Stacey! Scott and I would love to volunteer!

@outdoorjunkie2483 Жыл бұрын

That’s great!! I’m going to need it 😬

@ronsollod60 Жыл бұрын

Let me know when.

@outdoorjunkie2483 Жыл бұрын

We are working out a schedule now. Keep you posted

@ChapClassiq Жыл бұрын

hooray!!!

@BackOutside Жыл бұрын

yay!!

@MichelleandWilliamLunn-uz7qn Жыл бұрын

Hi! What campground did you stay at?

@outdoorjunkie2483 Жыл бұрын

This was not in a campground per-se it was in the primitive camping area.

@Lucky-mf7fm Жыл бұрын

What is this work? It really sucks! 😢Get serious

@moisesalvarado7703 Жыл бұрын

Thank you

@sethm8432 Жыл бұрын

I didn’t actually know I was doing it correctly, I thought my lantern burned through them too fast and I did something wrong! Thank you for the video, I bought an old 220k at an antique store for $20 and fixed it in the parking lot. It had smaller mantles in it already which worked until they fell apart and I replaced them with new ones that seemed significantly bigger and baggier. Thanks again!

@charlesharsha5973 Жыл бұрын

So if some are saying this is a bad idea what about just putting on mower tires

@angelsuniverse6021 Жыл бұрын

Screws didnt come off? No glue need it?

@sycksyn Жыл бұрын

Are you done with videos? Hope all is well.

@ryantoast6035 Жыл бұрын

Do you think this could work on trash can wheels to make them not so loud?

@outdoorjunkie2483 Жыл бұрын

Lol I’m trying it! We go through some bike tires in the house.

@davidc977 Жыл бұрын

I was worried if screws would fall out once tread wears off. have you experienced it yet? we have powerwheel going fast pavement and treads are gone..thanks

@80s9 Жыл бұрын

Lol hahahahaha I love it great idea thank you both

@Bluecollar_obs_limo Жыл бұрын

👍👍👍👍exactly what I was looking for

@solonepeon5805 Жыл бұрын

Wow I just picked up the craftsmans powerwheel car at a huge discount & was looking for a way to protect the tires & now saw this method. Thanks for the tip & now I gotta go find bike tires lol.

@west_park7993 Жыл бұрын

Another idea: Instead of destroying perfectly good 26 bike tires, can you think about small children's bike, like 12, 13, 14 15, 16 inches? One of these tires may fit the wheels nicely, so you do not need to cut and there will be no seam.

@west_park7993 Жыл бұрын

I don't like these screws. The heads are small and the rubber underneath is soft. They may just pierce trough and let the bike tire loose. Then, the plastic material is thin and these screws will not hold very well. Very quickly they will become loose and go lost in the grass. Then the child may step on them with bare feet... The other idea was glue. The plastic wheels are made of HDPE (high density polyethylene) or PP (polypropylene). Both are the most non-polar polymers known and there is no known solvent for them. They repel glue just like paraffin candle repels water. Of course, I may be wrong. There may be some breakthroughs. For example, if you drill many little holes in the plastic tires, then the glue will go through the holes and the strength of the glue will be because of the semiliquid material that goes trough the holes and solidifies there. Not the adhesion to the plastic surface itself.

@the_kombinator 2 жыл бұрын

Yeah, I can see this shearing the reduction gears in no time. I'll pass.

@CreutzfeldtTV 2 жыл бұрын

I know this vid is pretty old but jic anyone sees this and can answer me: I have an old power wheels JEEP. Do you think this mod is more effective for traction than buying new plastic wheels?

@rhyansimmons2691 2 жыл бұрын

Great idea

@dfores5602 2 жыл бұрын

This is great thank you! Wife and I were just talking about how to extend the life our kids electric vehicles!

@the_kombinator 2 жыл бұрын

Try this on pavement and after repeated stops from 2nd gear, you'll destroy the gearset in the motor assemblies.

@TacticalThib 2 жыл бұрын

Great job mom!!!!!!

@TeamHURSTOLDSRich 2 жыл бұрын

Great job. I want to do all 4 wheels, can 1 mountain bike tire cover 2 wheels?

@outdoorjunkie2483 2 жыл бұрын

Almost, if your wheels are a bit smaller the a 29” wheel tire would yes but not a 26”

@mrjp2149 2 жыл бұрын

Mom is a beast! Awesome mama bear right there

@outdoorjunkie2483 2 жыл бұрын

Lol thank you! Things we do for our kids

@tedlover7012 2 жыл бұрын

I tried this out on a child’s bumper car and it worked great! The original wheels got virtually no traction and only worked in one room of the house (and even then it needed a push to get started). It was so frustrating! I followed your instructions, except I used adhesive instead of screws and it now works perfectly! I’m a 59 year old woman and I was so pleased with myself! Hahaha Thanks so much for sharing this!!!

@outdoorjunkie2483 2 жыл бұрын

I love this! That’s what ours was doing and every 3 mins the kids wanted a push. That’s when I started to dig around the garage to see what I had. At the time I was not thinking adhesive but I will say I also didn’t have any adhesive. That’s awesome that you made it happen. I’m proud of you too! I’m going to try the adhesive on the next ine

@yemi0 6 ай бұрын

Please what type of adhesive did you use? If you can provide the name. Thanks

@tedlover7012 6 ай бұрын

@@yemi0 It's a rubber glue I bought on Amazon for $10. After two years it's still going strong! I tried to post a link to it twice on here, but, for some reason, I can't. It's Sdintar brand "Instant Adhesive Rubber Special Adhesive" - I hope that helps!

@frankiemacias8102 2 жыл бұрын

Awesome! I've been thinking about this for some time now for my little guy. It works great!

@NRB_75 2 жыл бұрын

So whats under dutch oven? Just hot coals?

@outdoorjunkie2483 2 жыл бұрын

Yes from the camp fire. So about 4 hours I would say of wood burning. Not that you need that long .

@eurodance 2 жыл бұрын

You are awesome! Great parenting and role model! Great video.

@jeremygeorgia4943 2 жыл бұрын

Perhaps, you should have glued it as well. It might stretch & slide off, on the side that wasn't screwed down. Other than that, it looks plenty effective.