I wish you had shown the proper routing of the cable.
@ATREYUROCKS742 ай бұрын
Honestly the most satisfying short I have seen in a hot minute.
@Vindexx2 ай бұрын
Thanks! I was absolutely shocked at how good it cleaned them in 30 min
@ATREYUROCKS742 ай бұрын
True. I didn't expect the shine. Thanks for the post
@wjanes112 ай бұрын
You did that intake dirty going in with no lube like that.
@Vindexx2 ай бұрын
Lol 🤣 there was lube on the bit and tap
@carter46272 ай бұрын
Bruh tap sockets are a dream come true and you need the sets from lisle. Small ones are 50 but you can negotiate some places to 30 and the large set is like 60. They are amazing for situations like this
@Vindexx2 ай бұрын
I'll have to check that out
@Pdxshawn912 ай бұрын
Lmk how it’s working out for u please
@Vindexx2 ай бұрын
So far working good, I'll do another video with testing the intake and sensor
@jimwells42402 ай бұрын
You REALLY need a ratcheting tap handle to do that.
@joebx11112 ай бұрын
5 horses?
@neilbrown822 ай бұрын
-5 Chinese shitt metal intake....
@ssnerd5832 ай бұрын
Hope ya put a lil Loctite on that fitting.....or at least some of that high temp white Permatex PTFE sealant....
@Vindexx2 ай бұрын
Yep blue Loctite, dont want it coming loose for sure!
@travtech12 ай бұрын
Put iat sensor in the boost pipe.
@Vindexx2 ай бұрын
I thought about that but decided not to as Im contemplating re-designing the charge pipes
@BL4KBE4R3 ай бұрын
Way to speed up through the important part.. 🙄
@TommyVGC4 ай бұрын
can you link where you found the halos? thanks
@Vindexx3 ай бұрын
I'd recommend finding another halo than these, they've already started turning yellow...
@BrittsGoodGetaways4 ай бұрын
hey Isaac! Great video! I wanted to see if I could use some of your drone clips in a youtube tour video I am creating for Frankenmuth and I will tag your channel in the description for others to check out. Let me know if that would be okay :)
@garyburdick19925 ай бұрын
Why show a video in fast mode when you’re trying to teach and people are trying to learn.? Just sayin!
@Vindexx3 ай бұрын
I need to do this again as I have another engine to do. I checked the original footage I recorded and the cameras were set to timelaps...
@cammontreuil75097 ай бұрын
I live in Redding. Own 3 classic mustangs. I have a great passion to work on vintage cars. But ive never been to the car show. I always find it difficult to sign up for anykind of event. Even this one.
@matthewwhaley64767 ай бұрын
Music needs to go.
@timhendley19508 ай бұрын
220 ft lbs for those brake bolts?! Wow! I just tighten them tight. Never knew they were to be torqued that high.
@sgarra649010 ай бұрын
what was the point in speeding through the good part (the actual connection etc) and the annoying "music"? That is the only part myself and others probably were interested in seeing.
@alexanderbanteev596010 ай бұрын
Thanks a lot!
@davidgrasscutter654510 ай бұрын
How many ssid can dream pro have
@Vindexx10 ай бұрын
Not sure, I have had 5 at once, all running on different vlans, but im not sure what the max number is
@coffeedollsvp10 ай бұрын
Was there any issues while driving or just error code
@Vindexx10 ай бұрын
Random ABS issues, and Error code from Check engine light.
@jamesmyers9442 Жыл бұрын
I seen your truck at Buffalo Wild Wings today and was curious about the tag on the front so I looked it up and found this channel
@Vindexx11 ай бұрын
Awesome! Thanks for checking it out! We've haven't been putting out as many videos on this channel lately as we've been working on building our house... those videos are @CVAcres
@pmd7771969 Жыл бұрын
Balance issues
@blaynetabon7209 Жыл бұрын
Promo>SM
@jewllake Жыл бұрын
I upgraded the non lux BOSE system in my 2006 GMC Yukon to the LUX y91 BOSE from Cadillac along with the touch Screen Navigation radio. Sounds good to me.
@yukaweed Жыл бұрын
What base did you use for the filter. Good setup!
@Vindexx Жыл бұрын
I ended up getting a 1 micron filter that is alcohol rated, but then i went and met my wife and got married and started building a house lol so i haven’t ran it yet, im hoping once we get the house built I’ll get back to working on the camaro as i still need to install a new torque converter and then take it to the track… thanks for checking out the videos!!
@foreverendeavors6210 Жыл бұрын
Is that a gen 3 crank? If so did you have to get it balanced? I have gen 4 rods wanting to install on a lq4 gen 3 crank, just curious 🤔
@Vindexx2 ай бұрын
Gen 4 crank - wow im late to these comments....
@foreverendeavors6210Ай бұрын
@@Vindexx 10-4 I've sence built that engine, and did have to get it balanced, gen 3 crank, gen 4 rods..
@VindexxАй бұрын
@@foreverendeavors6210 how did it run?
@foreverendeavors6210Ай бұрын
@Vindexx runs good, my daily, btr stg2 cam, tbss Intake, corvette injectors in an 04 yukon, runs good.
@darrelsmith4549 Жыл бұрын
I have 2002 avalanche Z71....you hooked your drl up to fog light assembly which for mine,has a separate on & off switch for them....is THIS the case with you guys? So,in theory,in my mind, they'll only be in,when your fog lights are on...? Correct? I'm just wondering where I should wore mine,I guess,find my drl and connect THERE if 8 have one or maybe give it its own switch 🤷🏼♂️idk Doing these upgrades NOW but trying to order the right thing 🤦🏼♂️
@UnratedRetribution Жыл бұрын
Good video. Very Straight forward.
@joejoesmojo32 Жыл бұрын
Does it matter on those flat tops whether they face forward or backwards? Technically they are symmetrical in all directions.
@Vindexx Жыл бұрын
Im not sure if it "technically" matters, but the Dot on the piston is supposed to face the front of the engine. I never tried any other way, but I'd be curious to see if it made a difference.
@UnholySeoul Жыл бұрын
Is there a way to do this so that Your AP & devices are on the same VLAN? or this additional segmentation necessary?
@nevysnova2 жыл бұрын
Sweet. 😛 fat bumper cars is what make the world go around.
@cristianbustos49182 жыл бұрын
how is you converterworking?
@Vindexx2 жыл бұрын
Its working Great! We finally got the car to the track the last few weekends. We cut a 1.4 60ft time using foot brake. Here's the video of the converter in action. kzbin.info/www/bejne/i3LQiKCPqNSGetU
@dare1ner2 жыл бұрын
You still running SEP injectors?
@Vindexx2 жыл бұрын
I am, I haven’t ran the car since i got married last year but hopefully we’ll have a new garage built in a bit so i can start on it again
@allenscharrer80712 жыл бұрын
Nicely done I love to see it again an again 😎😎😎👍
@dboigamedboigame99472 жыл бұрын
Great video, but does your led lights stay on even when the truck is off
@Vindexx2 жыл бұрын
Nope it functions the same as the factory one
@HIinfidel2 жыл бұрын
Do you remember where you sourced the gen 4 stuff from ? Did you use a gen 4 crank also
@Vindexx2 жыл бұрын
I found a nice guy on fb marketplace that shipped it to me. Yep it was a 4th gen crank too
@alexquevedo8312 жыл бұрын
If you just cleaned the cylinders with the crank installed you should use throw it all away. Meant fillings all over bearings.
@Vindexx2 жыл бұрын
It was all disassembled and cleaned then put back together
@FilipinaRaquelTV2 жыл бұрын
Hello dear friend love and support here to your channel, great show for different cars Sir they looos very beautiful and unique cars. God bless you and your family.
@B3burner2 жыл бұрын
Was there as well. What a show! Nice camera work as well.
@Vindexx2 жыл бұрын
Thanks!
@hondabuilder112 жыл бұрын
What kind of sonic cleaner do you have? I am interested to get one.
@Vindexx2 жыл бұрын
I have the Mophorn Ultrasonic Cleaner 30L Ultrasonic Cleaner. I got it on Amazon, but most of the Chineese ultrasonic cleaners are the same, I would go for a 30L or larger so that you can fit the entire head into the cleaner.
@adrianbustillos36922 жыл бұрын
Did you have this sub and enclosure on your 2500hd duramax?
@Vindexx2 жыл бұрын
I didnt have it in my Duramax but I had it in my 05 GMC 1500, it barely fit under the seat...
@markquesnel79072 жыл бұрын
Why remove Bose
@Vindexx2 жыл бұрын
I wanted a radio that could do navigation an stream music using pandora or spotify
@markquesnel79072 жыл бұрын
@@Vindexx shoot you can’t do it with the stock speakers?
@Vindexx2 жыл бұрын
@@markquesnel7907 you can but I already had a set from my z28
@Vindexx2 жыл бұрын
Finally received the replacement, be sure to check out the video next week for how that goes!
@robt29922 жыл бұрын
Didn't expect this when I click the video! The number one spot for online marketing Promo>SM!!!
@Vindexx2 жыл бұрын
Should check out my crash and burn video of the last one i got….
@ShiroKuroh2 жыл бұрын
Ok, this creates it, but you don't show how to assign to port, would like to see more of that, think completionists and tester.
@Vindexx2 жыл бұрын
Sounds good thanks for the positive feedback I’ll work on that!
@papergatorzfedducca79982 жыл бұрын
🔥🔥🔥🔥🔥
@papergatorzfedducca79982 жыл бұрын
New subscriber 🔥🔥🔥🔥
@Vindexx2 жыл бұрын
Thanks for the sub
@StevenBrown-me2 жыл бұрын
Outstanding video! Appreciate it👍
@Vindexx2 жыл бұрын
Thank you! 👍
@HiDDeNXTiTaN2 жыл бұрын
So happy for you guys‼️‼️
@Vindexx2 жыл бұрын
Thanks Bro
@jerrodnewsome14952 жыл бұрын
Sorry but that's not it. My 12 impact driver will take out those bolts.
@Vindexx2 жыл бұрын
Thats awesome! Im not sure if i knew the M12 impact was out when i made this video like 3+ years ago lol
@Vindexx2 жыл бұрын
The M12 and M18 stuff is awesome if your willing to invest in the complete set, but just have to be prepared to drop some coin on everything.