Пікірлер
@itsroli 8 күн бұрын
What causes that? I keep getting the same on mine
@Jeff_Rey 8 күн бұрын
@@itsroli either tugging at the valve too much. OR…the rim strip isn’t covering enough material around the valve hole and it’s popping against the edge of the hole.
@pankajbansal2549 9 күн бұрын
What is wired tyre mean, Is it different from normal tyres
@anussqadeer3181 9 күн бұрын
My wire not coming out
@anussqadeer3181 9 күн бұрын
My cable is not coming out
@anussqadeer3181 9 күн бұрын
I can't get the cable out
@1SWEETICETEA 10 күн бұрын
I have had my cruiser since 1999 and came to KZbin to see if I could find some diy videos on restoring bikes. Just curious, what is the price range for a refresh similar to the one in this video (not via diy)
@WillieBeard 18 күн бұрын
Looks great but ya lost me with the zip-ties.
@Jeff_Rey 16 күн бұрын
@@WillieBeard zip ties forever!!!
@ramborambokitchenkitchen6357 21 күн бұрын
It does work, the muc off stuff has been inside my fat tyre ebike inner tubes for the past 9 months, with 2k miles put onto it without getting a puncture. It was just thorns that were a problem in my area and with the 1-2mm holes those make, this stuff can seal it up easily.
@TariqBandar 21 күн бұрын
You made it pricey now I'm scared to loose it We want a beater bike Make videos of that it'll be fun 😅
@Jeff_Rey 16 күн бұрын
@@TariqBandar I’ll make a beater soon
@aremu4k 23 күн бұрын
Beautiful bike
@ACMaverick 24 күн бұрын
Does the gearbox need to be regreased before sealing it again?
@gafindio4775 Ай бұрын
I was recently blessed by this kind of problem on my bike. Welp that sucks i hate it when i need to replace things 😂
@nien3545 Ай бұрын
I am trying to put road tires on a city bike I don’t even have money for the fork do you think I would be able to do the conversion?
@glennmarkpendon7310 Ай бұрын
What's size for 27.5er mtb?
@riproaringblues Ай бұрын
Interesting test. I have used various tubeless sealants before but never an inner tube sealer. I can see the main issue is the very low pressure you are carrying out these checks with. At 45psi and higher it will eventually blow out many of your repairs.
@jbettone Ай бұрын
Is that an Ultegra shifter?
@Jeff_Rey Ай бұрын
These were sram force shifters!
@onewheelisbetterthan2 Ай бұрын
Hows it holding up a year later
@Jeff_Rey Ай бұрын
@@onewheelisbetterthan2 great! And even more comfortable! Ride it 3 days a week
@onewheelisbetterthan2 Ай бұрын
@@Jeff_Rey ok awesome news I'm going to pick one up on payday
@k-editz2548 Ай бұрын
Got jumpscared by a spider in the faceplate 😭😭😭
@Jeff_Rey Ай бұрын
Bro, they’ll get you!!!
@camedelic1365 Ай бұрын
Benefit of my MTB tires with thick tread. I've unfortunately ridden over a lot of glass, but fortunately no puncture yet.
@Jeff_Rey Ай бұрын
Wider tires, definitely help.
@sunvetr Ай бұрын
So then how much do we need
@Jamesthefastguy1154 Ай бұрын
They don’t roll at high speed
@Jeff_Rey Ай бұрын
@@Jamesthefastguy1154 what’s high speed?
@Verdenoesamarillo Ай бұрын
Hermosa bicicleta, saludos desde argentina 🇦🇷
@Jeff_Rey Ай бұрын
@@Verdenoesamarillo gracias amigo! Estoy aprendiendo español para mi negocio.
@waltersobchak7275 Ай бұрын
What is bike share?
@Jeff_Rey Ай бұрын
@@waltersobchak7275 the Devil
@waltersobchak7275 Ай бұрын
@@Jeff_Rey 🤣🤣
@voraimran27 Ай бұрын
How to buy this bottom set at online give me link
@Jeff_Rey Ай бұрын
Google my friend. 24tpi 1 piece bottom bracket set
@yomommaitsahoe8115 2 ай бұрын
Nice 👍
@Jeff_Rey Ай бұрын
Thanks ✌
@waltersobchak7275 2 ай бұрын
Wow yes this looks familiar. Just last night😂😂
@Jeff_Rey Ай бұрын
Just a day in the life 😂
@waltersobchak7275 2 ай бұрын
What would cause the bearing cage to start coming out around the bottom bracket lock washer and cone? Completely eviscerated looked like a metal blooming onion. It was properly greased. Maybe was too tight? Non drive side. Also I didn’t even notice while riding only afterwards. *Beach cruiser American BB single piece sugino cranks
@Jeff_Rey Ай бұрын
Too tight is an option. I’ve been seeing a lot of bearing races that are not perfectly round. So every rotation is an oval and putting pressure on the retainer, eventually it bends, a ball bearing falls out, then it crumples.
@waltersobchak7275 Ай бұрын
@@Jeff_Rey thanks man I appreciate response.
@rosco3221 2 ай бұрын
Lol awh
@WhyteOut 2 ай бұрын
What did you use ? The rims on my 87 Diamondback look the same and i need some help.
@Jeff_Rey 2 ай бұрын
Some steel wool, triflow, and a lot of elbow grease!
@natnguyen332 2 ай бұрын
One note to add. Muc-Off has a solid granular particle ingredient that helps with plugging up larger punctures faster and more effectively. Whereas the Slime sealant is all liquid.
@Medaniel_AndHis_friends. 2 ай бұрын
Ur literally showing how to destroy the brakes not fix idiot
@bruce20092 2 ай бұрын
Where did you get the foam padding?
@Jeff_Rey 2 ай бұрын
It’s the same foam that new bikes are packed with. If you ever need some, just ask your local bike shop. They have tons of it!
@guidodezwaan 2 ай бұрын
When i had a flat due to a nail I tried putting the regular muc off tire sealant in it and it actually worked. Just needed to ride it for a 10-20 minutes, as it did not fill the hole the first two days when i just set it in my garage and didn't drive it. Not sure why they made an extra product with 'inner' tube sealant, as the regular also works.
@HeAD-CRuMBs 2 ай бұрын
I agree with some of the others. You can't test the effectiveness of the product when it's not tested under normal use. It should be in the tire, on the bike, and under the recommended tire pressure but, that's not all. It should also be under the load weight of a person on the bike. One thing I know from experience is that punctures stretch and expand under a load weight then contract and shrink when the load weight is removed.
@DenkyManner 28 күн бұрын
True, but the size the tube can expand is also massively constrained when in the tyre and pushed up against the tyre wall.
@SmooveBee1 2 ай бұрын
Tube is inflated beyond it's normal dimension, to the test is worthless. A tube is normally contained within a tire, and it is a very different situation.
@SmooveBee1 2 ай бұрын
This is not the same as the tube being inside of a tire, flat-pressed to inside of tire; very much out-of-context sort of test, but we appreciate the effort.
@mikegalvez 2 ай бұрын
i tried to seal my flat tire punctured ebike put sealant and when i start pumping air all the sealant liquid came all out nonstop & didnt seal anything
@Jeff_Rey 2 ай бұрын
How big was the hole? I would only truly recommend it to help get you home, as in already have it in the tube. I wouldn’t use it to fix a tube, at that point just get a new tube.
@DiggaUndaHipHop 2 ай бұрын
starts to seal. but doesnt actually seal it.
@Jeff_Rey 2 ай бұрын
@@DiggaUndaHipHop I’m going to do a more thorough detailed test in the future, but it did seal the smaller holes for at least 48 hours before tossing the tube.
@MoonlitWood 2 ай бұрын
Curious if you've got thoughts between Muc Off and Flat Out. Obviously with Muc Off you have the inner tube sealant formula, and as far as I can tell Flat Out seems suggested more for tubeless tires?
@Jeff_Rey 2 ай бұрын
From my experience so far, the Muc Off is lasting longer in a real world scenario than other options. We have it in our rental bikes for our business and it’s still sloshing around 8 months after initial installation. I’ve had issues with other brands drying out within 6 months.
@ramiyasuresh3571 2 ай бұрын
Bro which gear is best shimano or microshift
@Jeff_Rey 2 ай бұрын
Depends on what level of components. Entry level microshift > Shimano.
@ramiyasuresh3571 2 ай бұрын
@@Jeff_Rey which one is more quality
@ramiyasuresh3571 2 ай бұрын
@@Jeff_Rey also why people are mostly buying shimano so is microshift cheap quality
@Jeff_Rey 2 ай бұрын
@@ramiyasuresh3571 both manufacturer low to high end components. The low end microshift parts are, in my opinion, to entry level Shimano parts. High end is a different story.
@JasonB33 3 ай бұрын
1968 stick shifter. 1970s handlebars
@Skull-l1m 3 ай бұрын
I really like skid the bike with brake, But the I remember my first time get mtb bike, Got crash oh wall when I was skid.
@Jeff_Rey 3 ай бұрын
@@Skull-l1m it’s still fun though 😂
@Skull-l1m 3 ай бұрын
@@Jeff_Rey Yuh uh
@Kreashin 3 ай бұрын
I have the caad 2, my mentor has the cad 1, very lovely bikes
@Jeff_Rey 3 ай бұрын
Some of the best ever made! 😎
@stevegosnell6797 3 ай бұрын
I'm just curious if you've done any more testing or follow-up with the Muc-off? I recently purchased a hunting ebike. It came with Maxxis Minion FBR 26x4 tires (with tubes). I'm considering using Muc-off. Any idea how much product each tube would need? Thanks.
@Jeff_Rey 3 ай бұрын
For a tire that wide, probably around 120ml a tube. If you’re going deep in the woods, it would be worth getting some tire inserts as well.
@stevegosnell6797 3 ай бұрын
@Jeff_Rey Thanks for the info. I've been contemplating tannus armour inserts as well.
@eel845 3 ай бұрын
Why do you collect them?
@Jeff_Rey 3 ай бұрын
@@eel845 why not?! I have had to use them before for customer repairs
@eel845 3 ай бұрын
@@Jeff_Rey I'm just curious. Had no idea it's a common thing to replace :) I fix my own bike and have never removed a valve core
@Jeff_Rey 3 ай бұрын
@@eel845 not too common, but they can go bad. I’m more just wanting to track them for the year. See how many I can get 😂
@eel845 3 ай бұрын
@@Jeff_Rey got it :) thanks for your time
@Jeff_Rey 3 ай бұрын
@@eel845 💪
@lilyann341 3 ай бұрын
106
@Jeff_Rey 3 ай бұрын
@@lilyann341 surprisingly, a lot more!
@royparks9489 3 ай бұрын
365
@Jeff_Rey 3 ай бұрын
@@royparks9489 these are the guess I like to see!
@huntersmokes420 3 ай бұрын
420
@Jeff_Rey 3 ай бұрын
@@huntersmokes420 ding ding ding! 🛎️
@BikeShedBoy 3 ай бұрын
Nice evening ride 👍
@Jeff_Rey 3 ай бұрын
@@BikeShedBoy 😁
@wotbot7013 3 ай бұрын
at least 5
@Jeff_Rey 3 ай бұрын
@@wotbot7013 a nice conservative estimate!