DON'T BUY FROM IMAZING!!! I needed to jump-start my car one day and got nothing. The car hadn’t been used for a several weeks. Of course I checked to make sure the item (IM27) was fully charged. I used my other car to jump-start my dead battery… drove it for @45 mins, then took it to Advance Auto Parts to have them check the battery and charging system. All good. Using a voltmeter I checked that the outputs to the IM27 were good, but 12v wasn’t getting to the terminal connectors. I reviewed the manual and the company website for any helpful info, but there was none. None of the company contacts for customer service (phone, email, support ticket) were working! Without further info, I went through Amazon to get a replacement, but needed to spend $22- (!) to send the item back to the company. After getting the replacement item, I charged it and checked the outputs but got the same results!!! I then found a video on another charger (link follows) that explained why (perhaps) I got nothing from this charger. Who knows if the replacement is working or not, since I don’t have a dead battery to jump-start. The bottom line is, crappy manual and non-existent customer service! kzbin.info/www/bejne/aoS1gJ2NrKyJrNE

fuckin useless video dont waste your 5 mins!

Can you zoom on the plus?

What make solder gun did you use? My capacitors are on their way!

Hi do you do repairs for clients with broken Receivers?

I have the same issue in mac 😢

This video doesn't explain how to use it, or how to use the included cables. Yes, I did read your comment responding to @alexisgarcia9202 that this video is titled "What's in the box?". Interestingly, you do mention in your information that you obtained this free from Imazing and they send free units for people to review. I wanted to know how the and what the DC Output port and cable can be used for. Also, in the video you mention that you will be using it for your cars, maybe you could have added that to the video. Would it really be that hard to have done a full review, showing "How it all works"?

You can up rate the voltage rating of the failed caps, ( it will not impact performance ) and you will get even more life from the device. They will be bigger but space should not be a problem, just got for it. Easy to see as the caps in question are domed when they fail. Simples !!

Get a 5v wall plug like a apple iPhone 5v wall plug.

A little over two years ago we bought two 200w floodlights to lighten up the horse paddocks during the dark winter months, they were quite costly and from a reputable brand. All in all I'd doubt they each have had a runtime in excess of 25 hours. Turning them on for the first time since early April, one of them turns out to be faulty. The leds are very dimly lid, and not very consistent in brightness. It's been replaced under warranty but it does make me wonder what life expectancy these units have. They are up on poles, exposed to freezing temperatures one part of the year, scorching sun the other. The housing was not breached, there was no moisture inside. Likewise with several smaller motion-detection lights placed around the barn, nearly all of them suffer from the same type of defect after barely 2 years. Could you enlighten me on why these 10+ years rated lamps turn faulty after barely two?

Real Good Video, very clear and informative, and so refreshing not to have music blaring out , i just wish my LED light wasnt so high up the wall, with not enough flex to drop it down to the ground, no doubt i will find a way around that !

Chinese atv I think

Hi very informative video. I have the same issue, and would appreciate if you could tell me if i disolder the existing capacitors, how do know what the plus and minus connections are on the existing capacitors, as i have conformation looking at the data sheet for the new ones i have just received and found out that connecting with wrong polarity could damage them. Awaiting your reply, regards Vincent

Hi ! I have a question! I downloaded everything and i did everything you say, but is still appearing an error message in my Premiere Pro 2020 that said " A LOW-LEVEL EXCEPTION OCCURED IN- INSTA 360 PREVIEW ( Transmit:::StartPlaybackClock)" And also, when i press "Windows- Estensions" nothing appeared there either! Do you know what can i do?

Hi, i've just replaced the 2 capacitors you showed in your video and my freesat box is working again. Many thanks.

Hi, I have a Foxsat box with the same problem. I have ordered some good quality Panasonic low esr capacitors. A couple of questions Do I need to discharge the big capacitor on the power board somehow or is it safe to do the job without discharging it? Also the ribbon cables do they just pull off or are there clips to release? I couldn't see because the video is sped up. Cheers 😊

Thank you . I has same issue in humax 3030 dose it same solution on this part ??

Aun no explica el uso de todos los implementos del equipo

Does the plugin work with CS6?

I had a couple of tablets like this, thought different variations. They are shitty junks. My first one I accidentally dropped onto the floor, and the whole screen is cracked and cannot be watched. My second one, that lasted a few months longer, became unusable because the battery inside swelled. Of course the performances on these tablets are incredibly shitty, and it didn't help that the battery life on these lasted only an hour or two. I got a proper tablet from Acer as a birthday gift from mom. It all happened around 2012 or 2013.

Hi Neil, I have an HB-1000S and the HDMI output is down. I bought a RCA to HDMI adapter and it works with the analog output of the Freesat bax, but of course with a very poor quality. Do you know how to repair the HDMI output? Is it possible? I don't want to change the box because the encrypted recordings on the external drive can only be played with the box which recorded it. Many thanks for your help.

Hello.Does it have accesory for underwater facemask?

I have the tablet same as that piece of Junk😢

Are you still working on a foliow up test? Looking forward to see your next video

Nice video, I will try today to make a cable like this. One question, I saw on another diagram that the Ground was put on the Pin number 8, can you tell me is the same or one is wrong?

Hi cool video. DId you test the suction power and whether it is really pulling 4000Pa?

The box seems NOT TO INCLUDE an AC plug FOR OR A WAY TO recharge it. SOMETHING IS WRONG!!! CAN't RECHARGE THE BATTERY WHEN IT RUNS DOWN AFTER ONE JUMPS ONE BATTERY A FEW TIME. Ie something is missing. The instruction booklet says you must charge it up. But there is no plug or anyway to recharge it. One needs to be able to do that - where is the recharger plug- not in box

hi guys can anyone please help with FeiYu-Tech Summon firmware v1.34 i install v1.37 now is not working

hi guys can anyone please help with FeiYu-Tech Summon firmware v1.34 i install v1.37 now is not working

Welcome back Simon! Great to see some new content.

Cool video Simon!!! I hope you can make more videos when you are not busy!! :DDDDD

THE WORST IS 7 LOOK IT UP ON AMAZON SEE THE REVIEWS WORST TABLET EVER CRAPPIEST PEICE OF GARBAGE BEARLY WORKS THE CAMERA IS PIXELATED COME ON AMAZON GET SOMETHING GOOD!!!!!

I think my friend has this exact tablet

I had the same problem as you and replaced the same caps that got it working but after a few months, the box's 2 front leds just flicker faintly but won't display any picture... Any ideas?

Hi I've just obtained this camera. The stabilisation mode DIS doesn't give the option to switch it on. Its stuck in OFF with no means to change it ? Any ideas why or how it can be corrected please ?

Can you use the wireless remote in your table?

Turned out not be that great

Uninstalling google play doesn't help, should of gotten rid of play services and log out in settings

You know what's even worse? A Lenovo tab M10 HD

My mom just bought that s1hit tablet for my younger brother

Cool vid I was wanting this for Xmas this cuz I find this cool😍😍😍

I have this board and the unit is dead, not displaying the rotating LED, could it be these capacitors? One does look a bit bulged!

Caps - the bane of every electronic device so much going to landfill for the cost of a few 50p capacitors!

i have one very similar and they are made by lifan mine is 125cc

at least you have a tablet with big screen. but in my tablet 2mb stroage, small screen, cant even download less graphics game, it casing comes of easily, its plastic, my tablet charges 1 hour and its battery life is 10 minutes and its freezes half of the time. it comes off when i drop it in 1 feet tall

I hate that tablet my mom bought it before when I was younger and was just: 🔥🔥🔥🔥🔥📱 *BURN IT*

My summon cam becomes hot while recording.. Why that happen? Any solutions?

Hi not working for me. Weird thing is that I didnt have the dll file to overwrite on premiere folder. I just copy-pasted it but nothing was solved. Any clue?

👍

thank you so much for this video! A local store near me has the summon+ on sale for 68€, and I wanted to get it to make some vlog type videos. But when I looked it up on Amazon, there were a LOT of complaints about the mic. But I saw that it was for the original Summon. So I wanted to check out the difference between the two models, and this video was exactly what I needed! Ordered one :)