SOB Garage - Sigsterrr Original Builds Garage

Пікірлер

@E-RayC8Nate 4 күн бұрын

Def. Not the 1st modded lol

@E-RayC8Nate 4 күн бұрын

But still beautiful🔥

@justinkinard500 6 күн бұрын

that car was flawless

@SOB_Garage 5 күн бұрын

Thanks! It just put down 738 hp at the wheels last week on the dyno! So I’d say the transmission did exactly what it was rated for

@jamiejacobs3618 8 күн бұрын

Just don’t drive your vehicle. Walk everywhere, be a man!

@4play688 17 күн бұрын

Newer models available that puts the button where the key was. No key needed

@SOB_Garage 16 күн бұрын

Oh that’s pretty cool

@snoozeflu 17 күн бұрын

I think the covid freaks should be forced to wear it.

@scbtripwire 20 күн бұрын

I can understand you just fine with both.

@SOB_Garage 20 күн бұрын

I probably shouldn’t have cleaned up the audio. In person there’s a noticeable difference.

@cjshearwood 20 күн бұрын

Stumbled across this at the perfect time. I've been using a Trend Stealth for a few years and finally run out of my stash of filters, but the new diaphrams and the push-to-test blows the water out of anything I've had previously. I don't really have a need for the full face visor that often, but the half face one is going on the shopping list.

@SOB_Garage 20 күн бұрын

Awesome. I use both depending on the situation. Especially when I’m cutting mdf or spraying Clearcoat.

@twizz420 21 күн бұрын

Pucker up! I can hear you the same with both masks. The rest is just BS. You don't need 180 degree vision to work on things in front of you. It's not like you're going into battle and need to see things coming at you from your peripheral vision. What a coincidence that you have affiliate links in the description. Of course you're going to pretend it's 1000x better.

@SOB_Garage 21 күн бұрын

It’s ok if you don’t like it. I actually wear the masks. If you don’t that’s ok too. Every good creator will post links to make it easy to buy.

@jamiejacobs3618 21 күн бұрын

Bane: You've merely adapted the dark! That mask looks BA and I can definitely hear you better.

@SOB_Garage 21 күн бұрын

Hahaha. Thanks Jamie.

@bjsmithart 26 күн бұрын

Nice work! You could probably press those grills with clamps. Just tighten them down in a star pattern like you would a wheel. I was waiting for that MDF to explode under the hitch. Glad it didn’t.

@SOB_Garage 23 күн бұрын

Man that’s a great idea with the clamps. I did use 2 layers of mdf top and bottom. I am sure if I had used 3/4” one layer would have worked.

@ChristopherCognetta 27 күн бұрын

The finishing touches putting this ride over the top! Just ordered our 2 shirts! Please add the work shirt/polo styles. Ty

@SOB_Garage 27 күн бұрын

Awesome! Thanks and I will see about adding them also Chris!

@jamiejacobs3618 29 күн бұрын

Let’s FN GOOOOOOOOO! That’s what a custom interior looks like. Great work Ol son.

@SOB_Garage 29 күн бұрын

Thanks so much bro! Appreciate you always supporting the channel!

@hermananderson36 Ай бұрын

That's awesome man I think I'm going to do that to my truck once I find a leather

@SOB_Garage Ай бұрын

Thanks Herman! I used a vinyl from Amazon. Want the link to it?

@jamiejacobs3618 Ай бұрын

Nice grill Paul Wall!

@SOB_Garage Ай бұрын

Hahahaa

@juliuslucas5604 Ай бұрын

Question. What of your lights go out

@SOB_Garage Ай бұрын

Not sure. 😆

@Drekoushranada Ай бұрын

I'm sure all of us are looking forward to the full video!

@SOB_Garage Ай бұрын

Man thanks Dreko!

@jamiejacobs3618 Ай бұрын

Can’t wait to see the final results

@SOB_Garage Ай бұрын

Thanks for always supporting the channel!

@clarocg6248 Ай бұрын

What book it that with the wiring diagrams?

@SOB_Garage Ай бұрын

Hey buddy. The book in the video is just the one that came with the painless wiring harness. I used a factory manual for the Camaro switch wiring diagrams but they are backwards wiring. Meaning they use ground as a signal instead of 12v like classic cars do so you need relays. Hope this helps

@camaroedogfood876 Ай бұрын

I love it . I bet this car makes it to the track .working man stuff

@SOB_Garage Ай бұрын

Thanks Camaro! It just might see the track!

@sempergumby8734 Ай бұрын

I believe it to hold that much. I build mine with duel feed direct , sonnax boost valve, tcc valve and afl valve kit, shim to be tight, holds 800+ hp easy

@SOB_Garage Ай бұрын

I agree Gumby. These transmissions will take a beating when built right for sure.

@clayritter Ай бұрын

Beautiful car sig

@SOB_Garage Ай бұрын

Thanks Clay! Appreciate it bro

@rajkamal648 Ай бұрын

very nice car n excellent work u have done,, iam also working on 67 camaro with LS3/6L80e swap in CA, my car ws blue originally, but bro i like yo custom color touch, i want to go blue again, love the blue u have, i know for sure its custom mix..if u don't mind i would love to have my car painted same blue, i will highly appreciate the color code or color mix (name), thank u n keep the good work going

@SOB_Garage Ай бұрын

Your car sounds sweet! My car was also originally blue that’s why I stuck with a blue. It’s a custom candy I made specifically for this car.

@rajkamal648 Ай бұрын

@@SOB_Garage thx nice car enjoy

@cuzz63 2 ай бұрын

Great work. I think I would park the Chevelle outside while doing all that sanding.

@SOB_Garage 2 ай бұрын

Thanks! I would but my driveway is always full.

@Mike-cw4cp 2 ай бұрын

Looks fantastic! Where did you find the carpet?

@SOB_Garage 2 ай бұрын

Thanks Mike! I added a link to it just for you in the description

@Mike-cw4cp 2 ай бұрын

Thank you, ordering some today!!

@SOB_Garage 2 ай бұрын

@@Mike-cw4cp awesome

@jasonmatthews7098 2 ай бұрын

What/ how do you keep the walls secured from falling over in the trunk? I’m laying out the trunk in my 64 Riv, and was thinking possibly of using magnets. Your trunk looks great

@SOB_Garage 2 ай бұрын

Thanks Jason! I used magnets in the last one and didn't really like it even using rare earth magnets. I drilled a hole about 3/8" and insterted on of the tee nuts I added in the description. They are very handy. I love to put them on the backside of stuff also which stops any possibility of them pulling through. If you look real close you can see one in the video. I only used 1 per corner. 2 per corner would be a little better but I couldn't get to another spot to drill once they were in there. Hope that helps.

@adamnarbeaux5898 2 ай бұрын

Just picked mine up last week! #975. At 400 miles. Can’t wait! I paid $102,000

@ChristopherCognetta 2 ай бұрын

One of your most impressive accomplishments. Amazing work

@SOB_Garage 2 ай бұрын

Man I really appreciate that Chris!

@jamiejacobs3618 2 ай бұрын

That trunk looks like Money!

@SOB_Garage 2 ай бұрын

Thanks bro!

@josephwoolfork 2 ай бұрын

Nice and smooth

@SOB_Garage 2 ай бұрын

I agree!

@duniet 2 ай бұрын

Question why didn’t you use the gen 5 console you prepped it for in earlier videos?

@SOB_Garage 2 ай бұрын

Yeah I put so much work in that and it looked so cool! Thanks for watching the other videos. I couldn’t make the shifter work properly so I had to find a different shifter. I guess I wasted 50 hrs at least with the other console.

@duniet 2 ай бұрын

⁠I know how annoying that can be. Why didn’t it work? I am doing the exact same thing in my 78 Camaro but shifter seems to work out🤔

@SOB_Garage 2 ай бұрын

@@duniet you must be using a different transmission. I am using a 4l80e and the travel is different.

@duniet 2 ай бұрын

@@SOB_Garage your right, mine is the 6l80. If you ever feel like swapping gauge cluster from a gen 5 let me know, I’m working on encrypting all the canbus messages, so I can run a gen 5 gauge without error codes because of missing modules. All you need is a bcm and a few wires :-)

@jonwheelis2037 2 ай бұрын

That yard needs to be mowed!!!!! My E-Ray is 321 what is yours?

@SOB_Garage 2 ай бұрын

I wish it was mine! It’s my buddy’s. I believe it was the last one made for 2024. Have you hit your 500 miles yet?

@jonwheelis2037 2 ай бұрын

@@SOB_Garage Not Yet

@E-RayC8Nate 4 күн бұрын

I’m 182

@E-RayC8Nate 4 күн бұрын

@paragonperformance has the Eventuri intake on sale for Black Friday!

@jamiejacobs3618 2 ай бұрын

Baller A$$ ride!

@SOB_Garage 2 ай бұрын

Right! I wish I had that kind of money!

@jamiejacobs3618 2 ай бұрын

Hot damn son!!!

@SOB_Garage 2 ай бұрын

Thanks bro! It is so sick!

@mattack6779 2 ай бұрын

Great video. I appreciate you telling viewers the truth about the PIT-A_S level it was. I will probably pay a shop to put my parts in my core as long as it cost no more than 3 digits.

@SOB_Garage 2 ай бұрын

Smart! Let me know how much it costs!

@xxuponafenderxx 2 ай бұрын

I’d really like to edit the dash in my 1970 El Camino. Can you help point me in the right direction possibly? Just not a fan of the stock sweeping speedometer and instrument cluster in it. Would like to replace it with modern needle gauges and make space in the dash for a modern radio setup.

@SOB_Garage 2 ай бұрын

I would measure the gauge holes and try to find some aftermarket gauges that’ll fit right in those holes. I bet you could find some. Basically slide the new gauge in the dash holes and then put the clamp on the backside holding the gauge in. Then you would just hook the new gauges up to the correct new sensors. You could probably do that over a weekend and it would make a dramatic difference.

@jamiejacobs3618 2 ай бұрын

Looks good bro!

@SOB_Garage 2 ай бұрын

Thanks bro!

@Stckit1 2 ай бұрын

The way you speak about doing a rebuild gives me the confidence haha. Any chance do you have any updated part numbers? Some of them are currently unavailable. Also thank you for making these vids

@SOB_Garage 2 ай бұрын

You can do it for sure buddy! I’ll update the parts list for you within a few days. Thanks for letting me know

@jamiejacobs3618 3 ай бұрын

Such a beautiful ride bro! Sounds and looks amazing.

@SOB_Garage 2 ай бұрын

Thanks again Jamie!

@jetdesmos8598 3 ай бұрын

True art work

@SOB_Garage 3 ай бұрын

Thanks Jet

@jamiejacobs3618 3 ай бұрын

Thanks for the tip.

@SOB_Garage 2 ай бұрын

My pleasure Jamie!

@jamiejacobs3618 3 ай бұрын

Darn fine work Ol son!

@SOB_Garage 2 ай бұрын

Really appreciate that!

@jamiejacobs3618 3 ай бұрын

Looks damn good to me!

@SOB_Garage 3 ай бұрын

Thanks bro

@GarySweat 3 ай бұрын

Good stuff man

@SOB_Garage 3 ай бұрын

Thanks man!

@jamiejacobs3618 3 ай бұрын

You make it look so easy bro!

@SOB_Garage 3 ай бұрын

Thanks bro! It’s not too difficult once you know the steps.

@6xcchamber971 3 ай бұрын

69 chevelles/Camaros are the best looking GM cars. I had a friend and he had a 1969 SS396 Chevelle and It has been my dream car since I was 12 years old. I like the Chevelle a little better than the Camaro because they have a full frame that can be reinforced. Thanks!

@SOB_Garage 3 ай бұрын

Thanks Chamber! Me too. My frame is reinforced. It’s almost finished and I will miss it I’m sure.

@jamiejacobs3618 3 ай бұрын

Definitely better than I could do!

@SOB_Garage 3 ай бұрын

Thanks Jamie!

@Ijustwantone 3 ай бұрын

Hi SOB what do you sand down the engine bay with? After the high build primer. Thanks.

@SOB_Garage 3 ай бұрын

Depends on how it looks. If it will need to be primed again I’d use 220 grit. If it may be the final coat before paint - 400 grit. Does that help?

@indy007jones 3 ай бұрын

Nice work, what thickness aluminum is that.

@SOB_Garage 3 ай бұрын

I think it’s about 16 gauge?

@ChristopherCognetta 4 ай бұрын

Love it. Great journey and so happy to have been able to work and learn along side. For the viewers, the car is beast, and this is just the base setup, it can be a ton faster. I know Sig will keep chopping at it for a while. ALso note, this car will BE FOR SALE SOON. Again, congratulations Sig!

@SOB_Garage 4 ай бұрын

Thanks bro! I’ve appreciated all your help and encouragement along the way for sure.

@jamiejacobs3618 4 ай бұрын

That’s a really clean looking Transmission.

@SOB_Garage 4 ай бұрын

Thanks Jamie!

Ең жақсы KZbin

Пікірлер