Пікірлер
@user-xs6ne8qw8x
@user-xs6ne8qw8x 10 сағат бұрын
Thanks for the awesome video, helped clear up a few things to do with the switch settings 👍🏼
@TheUntamed101
@TheUntamed101 2 күн бұрын
You helped correct some missunderstandings I had about how to do bonding, and I was able to correct my configuration as a result. Thank you for the clear and easy to understand explainations <3
@CommanderQ
@CommanderQ 9 күн бұрын
I'd be interested to see the differences between the modes if you were using a layer 3 protocol built for multiple paths (sctp). Iperf supports it, but there's a bit of extra overhead to account for too.
@lokizfenrir
@lokizfenrir 10 күн бұрын
would mention id definitely not install this card permanently on a riser like yours, these LSI cards run EXTREMELY hot, worth either attaching a fan directly to it or position it better so that your airflow will properly pass that heatsink.... @HomeSysAdmin
@SimonBoyes-r5v
@SimonBoyes-r5v 12 күн бұрын
Great video, very complete yet couldn't have been delivered faster, no filler, thanks so much.
@hprompt166
@hprompt166 14 күн бұрын
Hi There, I have 2 dell r720 running pve 8.2.4, connected by 2 1gig links to a cisco 3750 switch. I can get one pve to connect to the switch using lacp for the bond0. the other pve won't connect. same configuration for both bond0s. If you want more info let me know thx
@superJK92
@superJK92 14 күн бұрын
Didn't LTT make one that is over 1 Petabyte with 22 Terabyte drives
@mrscotthall82
@mrscotthall82 17 күн бұрын
Hi, how did you install the fan on the cpu cooler, did you have some small clips ? I have similar setup but has fan mounted vertical in the case but its very noisy, its a San Ace 40
@christopherlopez2729
@christopherlopez2729 19 күн бұрын
will this work on windows10 and 11?
@jonathanraven5939
@jonathanraven5939 Ай бұрын
Absolutely amazing
@84Actionjack
@84Actionjack Ай бұрын
Great help. Bought the wrong rails too but your video stopped me from fighting to fit the chassis into the rack. Thanks.
@szabolcsilles9567
@szabolcsilles9567 Ай бұрын
Many thanks for this tutorial. My MCX455A-ECA cards FW upgraded as well without any issues.
@Kingboy17365
@Kingboy17365 Ай бұрын
looks like it can fit just the cables in the way
@badger47-n3c
@badger47-n3c Ай бұрын
*Casually pops in a square nut* Either those are actually decent square nuts, or this man has the grip strength of a titan.
@dazagrt
@dazagrt Ай бұрын
Hi, could you tell me the model number of the APC power transfer units, please? I would like to try and some secondhand.
@HomeSysAdmin
@HomeSysAdmin Ай бұрын
The APC units are model AP7750A. Good luck!
@RadosławHoffmann
@RadosławHoffmann Ай бұрын
Hello, what JBOD you have?
@HomeSysAdmin
@HomeSysAdmin Ай бұрын
Modified CSE-836 and CSE-846 cases.
@Nithhoggr
@Nithhoggr Ай бұрын
Exactly what I wanted from this review, thank you.
@user-jt6sn7yu1d
@user-jt6sn7yu1d Ай бұрын
This is just what I want to do. Hope I can find some parts
@eliaskpst
@eliaskpst 2 ай бұрын
11 Cents for 1kWh 😮… in Germany we have 30-84 Cents 😢😂
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
Holy crap that's expensive! Sorry :(
@scottalan4655
@scottalan4655 Ай бұрын
Should have listened to Trump
@espressomatic
@espressomatic 2 ай бұрын
If you had gone to Metal Supermarkets, you could have saved a bundle on the aluminum channel and flats. ;). OK, did I completely miss the "WHY?" - what's this storage being used for? EDIT: ok, I see it's a crypto scam in Chia. Almost impossible to have positive ROI and the entire crypto/blockchain specu-farming "industry" is completely ruining the whole computer industry with serious knock-on effects on society as a whole. FM. What a waste. My Meager 500TB array is earning money honestly, the old-fashioned way, serving porn.
@MAD20248
@MAD20248 2 ай бұрын
any issues with this AP, idk why netgear has some bad reviews on Amazon , almost all of them do
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
Yes, I was having trouble keeping certain devices associated. I ended up getting rid of them unfortunately. The firmware seems to be very buggy almost like it wasn't even tested before releasing.
@MelroyvandenBerg
@MelroyvandenBerg 2 ай бұрын
How much U is your rack?
@MelroyvandenBerg
@MelroyvandenBerg 2 ай бұрын
But what if the power goes down? And... It's it's dark outside.
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
I have a 75kWh battery bank, doesn't matter if sun is out or not 🙂
@okanerdem
@okanerdem 2 ай бұрын
If you are using pfsense, still do you need a core switch to route vlans?
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
No. Pfsense is a router, thus it will route between vlans; however, a switch is designed specifically for switching and will be significantly more efficient at it. The 2920 I'm using here has a 176Gbps switching capacity whereas Pfsense is pretty much limited by the CPU or the network link (10Gbps in my case).
@okanerdem
@okanerdem 2 ай бұрын
@@HomeSysAdmin In this case if i dont have any core switch, i can continue with pfsense right?
@MelroyvandenBerg
@MelroyvandenBerg 2 ай бұрын
Yes you can keep using opnsense or pfsense. But a L3 core switch might still be a nice upgrade.
@okanerdem
@okanerdem 2 ай бұрын
@@MelroyvandenBerg Thanks a lot for the information
@Ian-S.
@Ian-S. 2 ай бұрын
This video answered questions that the Lawrence Systems (multiple) videos didn't do! Great work.
@katjaczajkov8694
@katjaczajkov8694 2 ай бұрын
please dont lie, dont tell me its your home lab like the other once. it isn't! no one can buy it, can handle it with this power consumption except things like a company or privat worker at home. in german we describe this like a mini-company or one-man-company.
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
I don't know what you're talking about. It's a homelab. The equipment is cheap and the classification of power consumption is entirely subjective. 1500W is NOT a lot of power to me. At $0.11 per kWh, it's very cheap not to mention it's offset further by solar. So no, I am not lying...
@katjaczajkov8694
@katjaczajkov8694 2 ай бұрын
@@HomeSysAdmin ok thats right, for less eq 0.11$ per kwh thats really cheap.
@michaelgleason4791
@michaelgleason4791 Ай бұрын
Not all of us live in a country that completely ruined its energy supply.
@katjaczajkov8694
@katjaczajkov8694 Ай бұрын
@@michaelgleason4791 shure thats right
@cidadaoPPT
@cidadaoPPT 2 ай бұрын
Hi there. I’d love to reach out to you regarding pfSense and a product we have for it but couldn’t find any information in the channel details. If there’s an email I could use I’d appreciate it.
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
There is an email address (for business purposes) in the video description.
@gamergamer2990
@gamergamer2990 2 ай бұрын
does intel x520-t2 supprt multirate mGig (1,2.5,5,10) are you sure coul you makesure. from what i know it is limit to (1,10)gig
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
I'm using it with 2.5Gb as I discussed here. It works fine. Here's the output from ethtool Supported link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full 5000baseT/Full 10000baseT/Full
@idahofur
@idahofur 2 ай бұрын
First of all it took me years to track down a 4 post rack for a good deal. This area is the same for pricing. I also was going for a full blown HP rack with doors and such. Until I measured and realized how big it was. Anyway then I had a good chuckle about the fiber isp and the 2.5gb port. As you know those started showing up on motherboards. I'm thinking that is crazy as the fiber ISP in this area. Anyway then you pointed out it i on your rack. At least this one is not that bad. But, I do have stories.
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
Do you have the same ISP / ONT?
@idahofur
@idahofur 2 ай бұрын
@@HomeSysAdmin No. But, I'm sure other have interesting ISP fiber providers that is not large and well. The story is interesting.
@stephenlmoody
@stephenlmoody 2 ай бұрын
I would put rubber grommets in between the aluminum strip and the hardrives, you may run into spindle syncing and would cause issues with the hard drives. Just an fyi as I had run into this on racks of storage arrays.
@balex96
@balex96 2 ай бұрын
"I think we should be able to pull this one out fairly easily" Famous last words :D
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
LOL!!
@SB-qm5wg
@SB-qm5wg 2 ай бұрын
Very nice set up.
@WestleyPaynter
@WestleyPaynter 2 ай бұрын
nice chia farm :D
@arigornstrider
@arigornstrider 2 ай бұрын
Nice rack 😉. But seriously, that is a great setup.
@AndyMcBlane
@AndyMcBlane 2 ай бұрын
Those transfer switches are sweet. I believe modern computer power supplies are rated for something like 30ms drop in supply without losing rail voltages, so I suspect it’s probably OK? When I get solar I’ll probably be switching mine a couple of times a week at least. It has a web interface so probably pretty easy to switch it with a web request. Nice setup, looks sweet. Warms the floorboards of the house?
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
They are nice indeed! These do have a web interface as well. It's very old, this particular model was actually discontinued a year or two ago, but it still works and is very easy to send any requests to via cURL. Switching could be automated very easily. And yes, it is quite warm down there during the summer. I'm approaching the thermal limits of the basement really before I need to consider installing air conditioning, which I really don't want to do. I think last year it topped out around 81-82F. My heat pump water heater is about 30ft away so it happily consumes a chunk of the heat :)
@dudeh9702
@dudeh9702 2 ай бұрын
Thanks for the updated tour! I'd definitely be interested in a little solar tour and how you set up any transfer switches or battery banks (if applicable). I'm getting into off-grid/grid-tied solar stuff. That's a great idea to look for "used"/new full size racks. New racks are $1000-4000 or so and that's a bit steep for homelab lol
@Ownermode
@Ownermode 2 ай бұрын
Nice setup. Really clean and sensible overkill. As it should be with a hobby
@BlackBagData
@BlackBagData 2 ай бұрын
I got my practically new 42U Dell cabinet for $100. Great looking rack!
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
Great deal!! I'm going to guess you live in or around Texas or California?? I literally never see those kinds of deals here in PA.
@BlackBagData
@BlackBagData 2 ай бұрын
@@HomeSysAdmin Correct, CA. Typically, cabinet racks can range from free to $300. My year long search was because I’m outside of a metro area so it wasn’t easy to find one close enough that I could get my neighbor to pick it up with me. AND I just got lucky that this one was basically new and still had the keys. I wouldn’t know PA, but not surprised to hear it. Congrats to you!
@blademan7671
@blademan7671 2 ай бұрын
How is your 1U Supermicro pfSense only pulling 35w? Please provide details!
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
X11SSW motherboard, E3-1230 v5 CPU, X520-T2 network card, PWS-504P-1R power supply. Pulls 35 Watts during normal operation with pfsense running (suricata and pfblocker packages).
@GuildWarsUploads
@GuildWarsUploads 2 ай бұрын
"2.5gbit is really a really odd speed" lolwut???? Pretty much any mainstream "gaming" motherboard has 2.5gbit lol
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
Yes, my desktop motherboard has it as well, but have you ever actually tried to use it? Switches are readily-available for 1Gb and 10Gb. Sure, you can find some 2.5Gb switches, but then there's the driver support, and lack of proper auto-negotiation. The list continues.
@tjb_altf4
@tjb_altf4 2 ай бұрын
@@HomeSysAdmin yeah switch market is weird for 2.5GbE, its either cheap chinese stuff (which is probably fine, servethehome has some good vids on these), or its enterprise level gear with a price tag to match... no happy medium. I settled for 10GbE SFP+ switches, and used a transceiver that was capable of running at 1/2.5/5/10GbE on the 10GbE port.
@MelroyvandenBerg
@MelroyvandenBerg 2 ай бұрын
2.5 and 5 gbe switches are now available
@nadtz
@nadtz 2 ай бұрын
I happened on a good deal on a 25u unit so i'm doing the whole migrating everything to the rack now. Really nice setup you have there.
@shephusted2714
@shephusted2714 2 ай бұрын
talk about 2g fiber when you get it
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
$99/month, difficult to beat that!
@comictrio
@comictrio 2 ай бұрын
Nice setup. Very efficient.
@Dvalin21
@Dvalin21 2 ай бұрын
Looking to build server around the Supermicro X10DRH-iT Dual Intel XEON E5-2600v3/v4 LGA2011-v3 E-ATX Motherboard. I would love to have a stand up tower for it, but will settle for a 3U or 4U server case. I need it to have no less than 12 HDD bays. Thanks for your info
@HxgDan
@HxgDan 2 ай бұрын
Great tour! Looking forward to you adding in the microtik 10g switch in the future, I've been eying up a few different microtik 10g switches to finally bring 10g to my lab, but I've just not been ready to pull the trigger with the pricing.
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
CRS309 is the one I think I'll be going with. The price is very fair and has plenty of ports (at least for now).
@MelroyvandenBerg
@MelroyvandenBerg 2 ай бұрын
What about FS switches? These are great as well!
@ConnerWithAnE_
@ConnerWithAnE_ 2 ай бұрын
What disc drive do you use to backup your blue rays?
@HomeSysAdmin
@HomeSysAdmin 2 ай бұрын
LG WH14NS40 that I flashed with WH16NS60 firmware.
@clarencewiles963
@clarencewiles963 2 ай бұрын
Wait and watch. You listen to yourself. Thumbs up 👍
@-seafish
@-seafish 2 ай бұрын
I built your previous pfSense build for my home lab and paired it with a TP-Link Omada switch and AP. Everything works amazingly!
@happy9955
@happy9955 2 ай бұрын
very details thank you
@ukvc
@ukvc 2 ай бұрын
i like these kind of videos