You can stir it with the lid on if you have a vortex paint shaker, I use a FOUR Es Laboratory shaker. Let it settle, then give it a slow stir. It should get everything off that is sticking to the lid. Anyway, thanks for putting this up because when I first uaed it I thought it was a flat varnish and it made my model look like a frost had hit it.
@alessandrofermani6 ай бұрын
For airbrush whitout thinner?
@charleswillis2509 Жыл бұрын
Thanks for posting.
@ianthomason8563 Жыл бұрын
Hi Fired my airbrush up for the very first time this afternoon (yes a real newby) using Valejo Surface primer. Used a 0.3 needle and the airbrush quickly became clogged so I presumed that it needed thinning which I did 50/50. Improved things a great deal at 20 psi. What needle did you use in this video, you seemed to get good coverage.
@ryleymanandgrandad Жыл бұрын
i should of watched this first before diving in on the flat base..ive just undercoated my finished model thinking it was a base coat..the more you know...lol
@rgj8044 Жыл бұрын
Airbrush pressure???
@jean-lucadant15932 жыл бұрын
cool merci
@Steve-dr7rr2 жыл бұрын
No sound
@Steve-dr7rr2 жыл бұрын
So can I ask does it turn gloss paint to Matt and have you covered the other one in the sets
@medicsoldier222 жыл бұрын
it does yes. I use it for such purposes most of the times. Even on topcoat whenever I only have a gloss or semis left. So long as they are of the same type, which is acrylic.
@airsoftfreak113 жыл бұрын
what are the models? id enjoy a battleline of muskets and a bucket of dice to roll lol
@androot693 жыл бұрын
Cant they just call it a matting agent????
@titithierry9203 жыл бұрын
Can you thin this primer with water or alcohol drops ? have you tried it ?
@jimmytan99173 жыл бұрын
does this primer need to mix with thinner ?
@sandtable80913 жыл бұрын
Very nice video. The primer doesn't actually shrink but has a composition that allows what is called 'self levelling'. It's a feature of Vallejo and other quality paints. Hope this helps.
@lestatsev4 жыл бұрын
Switching from Krylon rattle can to this made me worry how delicate it seemed, but after atleast 3 thin coats and letting it dry completely for 24 hours just to make absolutely sure, i was happy with how resilient it was rubbing off was not happening, and scratching only when extreme pressure was applied.
@Zeriel004 жыл бұрын
But why would this use water? Arent Tamiya Acrylics Alcohol base? I thin mine with alcohol...
@chainsawpanda24 жыл бұрын
is washing up liquid hand soap or dish soap?
@PlaidPenguinGaming3 жыл бұрын
It’s dish soap
@CubejamF14 жыл бұрын
Cheers for the video, think I'll pass on using it on the current model as I don't think I quite need it. Kit recommends using it on top of a black base, will just use a flat black instead to get the same effect
@Tom_-4 жыл бұрын
You don't thin the primer at all when airbrushing? Vallejo doesn't say to but I've had it go on too thickly without thinning.
@paullemieux33714 жыл бұрын
So ther dark yellow primmer
@paullemieux33714 жыл бұрын
Can you just use primer only ther nop,ace I can find dark yellow if you can help ore any one that would be great thanks
@gordongriffith90474 жыл бұрын
Does it need thinner
@lovinmusic5004 жыл бұрын
Do you have to use a mask when using is primer if you're only brushing it on?
@PlaidPenguinGaming3 жыл бұрын
Nope
@Tom_-4 жыл бұрын
I'd imagine this sticks really well to lead/pewter based miniatures, but on polystyrene based GW plastic miniatures I had terrible trouble getting it to stick nicely. Also, it was shiny, and probably a bit lighter than I had expected. I think I will attempt it again but having shaken the bottle a lot more than the last time.
@Kshatriya-bz8dd5 жыл бұрын
Why does my airbrush keep clogging up when I use primer I run it at 45 psi and I'm using an iwata airbrush
@blaaaaaaaaaaaaargh5 жыл бұрын
I had the same thing happen with my primer, first off shake the bottle. Then for every 20 drops you also want to add 5 drops of valejo thinner and one drop of airflow improver. 4/1 ratio paint to thinner seems to work best for me. I'm using an HC eclipse.
@martinoconnor43142 жыл бұрын
@@blaaaaaaaaaaaaargh I know this comment is 2 years old but I just used vallejo primer for the first time today. The ebay seller recommended just using vallejo flow improver, that worked fine with they grey but the black was constantly clogging, I'll try thinning the black next time, thanks.
@markpr73 Жыл бұрын
This thread reflects one basic problem…Everyone has their own method and their own recipe for success. And no end to the places one can visit online to get every variation thereof. Oddly enough, my go-to primer used to be Rust-Oleum gray 2X Coverage rattle can primer. I’ve had great results with it in the past unless I got distracted and trained it in one spot just a little too long, but that can happen with any primer. I bought the 200ml size bottle so I HAVE to figure out how to get it to work! Last night I started with a freshly stripped and cleaned a/b, and a ratio of 3 drops thinner to every 10 of primer, with 2 or 3 drops of flow improver. Mixed it up in the cup and set my compressor to 15psi and from the very first pull on the trigger it was gummed up. So I’m going to kick the psi up to 20, increase the thinner and try it again. If I can’t get it to function properly, I’ve got some of the Vallejo black primer I can try in its place. I’m running out of hairs to yank out with this primer bullshit!😄
@Kshatriya-bz8dd5 жыл бұрын
Why does my airbrush keep clogging up when I use primer I run it at 45 psi and I'm using an iwata airbrush
@reggiecactus28104 жыл бұрын
Kshatriya 8271 Vallejo recommends a PSI of 15-20
@hyndland655 жыл бұрын
Great explanatory video. Thank you.
@DobbsyLondon5 жыл бұрын
You need to stress that a filter respirator is the minimum required. A face mask is only foro dust, not aerosol rendered chemicals or paints.
@gkspain15 жыл бұрын
Are you still painting this looks great, have subscribed, all the best Garry
@nekketsukai5 жыл бұрын
How could I sand it?
@GniewnyMedrzec4 жыл бұрын
Sanding primer? It's not necessary cause it's designed this way (it's not a automotive primer). Just avoid thick layers of paint and let it dry completely before painting with base colours.
@PhilShary5 жыл бұрын
Thank you for this review, I used to buy Imperial Primer from Citadel, but it was discontinued
@bleedinggumsroberts35795 жыл бұрын
Is it sandable?
@j3v1675 жыл бұрын
The reason why you should stir slowly is so that you do not create air bubbles which can ruin the finish later.
@supermanwhereareyounow30816 жыл бұрын
just straight primer?i use 0.5 airbrush juat for primer.how do you clean the airbrush afterwards?
@garciasartwork1856 жыл бұрын
dose this work well with soft plastic toy models?
@zeroa66 жыл бұрын
Great video. Thanks.
@BennyCFD6 жыл бұрын
There is no secret to acrylic primers. It's just some urethane type of liquid and a color. Thinning your paint with floor wax will do the same thing, and you can choose what color you want and it works 100 as well. I've been doing this for years. And, it's a slot cheaper.
@1337fraggzb00N6 жыл бұрын
Trivia: when using spike shaped or sharpened tool, which is designed to fit near the barrel of a rifle, to mix egg yolk with rapeseed oil, you will get bayonnaise.
@panupongyormin57956 жыл бұрын
thanks a lot
@IAmACrab20206 жыл бұрын
would it be possible to use things like tamiya paint over vallejo primer?
@befreiungskriege6 жыл бұрын
Jackson Golden yes, that should be possible.
@dalton_nbg6 жыл бұрын
Just what I needed. Thanks for the review.
@ashhillmodels38016 жыл бұрын
I happened to try the black primer a couple of days ago, for the first time. I used normal tamiya paint as a base coat before. And i gotta say i love it. It bonds very well with the surface and kinda shrinks around details and makes them stick out. And next layer of paint sticks on very well too.
@oowen77346 жыл бұрын
Its good just have to wait a day for it to cure
@papaben54277 жыл бұрын
The XF paints are flat. The X paints are glossy. It is strange that X-21 is a flat base.
@oldbaldfatman27667 жыл бұрын
Thanks for the video on this product and also to others who made comments about this paint. Getting back into modeling after 15 years or so and Floquil SP lettering grey was always my go to paint because it being lacquer based, it would "bite" into the plastic/metal pieces. Still got a couple of unused bottles, but know I need to find a replacement product and will give it a try when I run out of the good/tried & true Floquil paint.
@KillerKatt666 жыл бұрын
Old, bald fat man Did you bother to clean your model before you tried painting it?
@zelu19847 жыл бұрын
Martin I got a question. Can I use this to cover up the small holes that are left after sanding to achieve the smooth surface or is there something better I could use?
@befreiungskriege7 жыл бұрын
Zelu Tom no, I wouldn't recommend this as a filler. What you use for that would depend on the material you're priming.
@zelu19847 жыл бұрын
Thank you for your reply! What would you recommend to fill in the gaps/voids after sanding to make it smooth? (I'm working with 6" action figure)
@befreiungskriege7 жыл бұрын
Zelu Tom for plastic items, I use Perfect Plastic Putty by Deluxe Materials but there's also the Mr Hobby range of "surfacers" which might be more suitable for small imperfections.
@zelu19847 жыл бұрын
thank you very much!
@juliaspearing69497 жыл бұрын
I used it for my blood bowl Orcs and it didn't fully cover the plastic. Is that because it wasn't shaken?
@DienekesShade7 жыл бұрын
I used 3 different colours of this crap of a primer and each and every one of them bubbles up like a frigging champagne. Hate it. Nightmare to out on with a brush. And the way the pigment separates from the medium is mind boggling.
@rurushu80947 жыл бұрын
I was about to buy this a varnish, luckily I saw this video and am going to be mixing this with my X-22 clear.