Thank you!!! ❤😂 saved a tired mom some reading and research
@rebeccasmillienedelec657 Жыл бұрын
This was great- thank you!
@estherstark9849 Жыл бұрын
Thanks so much for posting...isn't the inside moist? Won't it get moldy?
@nsanchez_mke Жыл бұрын
Accurate
@zuleiik15752 жыл бұрын
Omg thank you for showing us!!! I was about to reopen machine 🫠🫠🫠
@texasusa47962 жыл бұрын
I dont understand why all the stuff from the screen doesnt show up no problem any of that but is doesnt start I push the start button is keep beeping every time press.
@priscillamendoza15952 жыл бұрын
Thanks! Saved me a ton of time. Getting ready to store ours.
@samantha42012 жыл бұрын
Thank you! I didn’t expect all the water
@ambernm97202 жыл бұрын
My machine is stuck in the storage mode and won’t stop trying to dispense. Anyone else had this problem? How do I fix this?!?!
@zulemagonzalez29062 жыл бұрын
I tried this and it didn't work,what am I missing?
@jadek24093 жыл бұрын
Thank you!!
@SD-xe4on3 жыл бұрын
Good evening May I ask you if is it possible to put milk instead of the water ?
@megandawn78794 жыл бұрын
Omygosh! Such a good review, I LOVE that you brought to our attention of the formula tab/comparability! My daughter is lactose intolerant and has horrible reflux couldn't keep formula down unless it was mixed with oats. Also love the fact that you showed us how to clean then funnel! No reviewer of Baby Brezza has said either of these very important tips. Thank you sis! 🤩🤗
@christinesjung78454 жыл бұрын
Even after draining per the instructions, I was still able to shake some water out after leaving it out to dry for several days. So I'm wondering if there's more water that I can't see. I don't feel right selling or storing long term until I figure this out.
@kristenvolk58463 жыл бұрын
Christine, did you ever figure out how to drain the rest? After having mine sit for a couple days I found this video which helped to drain a little more but I still feel like there is excess water in it! I don’t want to store it and ruin it if it’s going to grow mold inside :/
@brittanyfish3 жыл бұрын
I’m wondering the same thing! I don’t know how to dry the parts that had the extra water actually stored.
@kemaltalen97912 жыл бұрын
I'm going to run the 50/50 water-distilled vinegar solution through it before and after storage. That should clear any germs, bacteria, mold that could grow during storage.
@briseidaandrade4094 жыл бұрын
I buy it like 2 days ago and I think the warmer Is not working 😰 that’s why I coming to this vídeos for see if I do something wrong but I see and no 😕 so I think is no working 😳
@fionabartels47564 жыл бұрын
I will give customer service a call because my very first machine I had which was not be advanced pro had issues with the dispensing water and I gave them a call. After making a video and sharing it to them to show how the pump was not working, they sent me a new machine to replace the broken one
@samanthawaldron54584 жыл бұрын
I just got one and it won’t seal right on the tank and they said I could buy a new tank but it’s not covered under warranty and target won’t take the machine back so I’m out the $200.
@musicspinner4 жыл бұрын
Can it make hot chocolate?
@fionabartels47564 жыл бұрын
It would not be hot enough for hot chocolate. It would be just above body temperature warmness
@tamistepanyuk4 жыл бұрын
Why did you put 5 settings for formula and 3 oz of water? Just don’t get it?
@cortezc34 жыл бұрын
Same here but I think I figure it out. You need check brezza site and search your formula type/brand and will show you what number SETTING to set brezza. I was so lost I bought it for my wife to help while I'm at work and it seemed complicated but is not. Hope it helps and makes sense.
@jessi1.04 жыл бұрын
Tami Stepanyuk ^^ Yea, when you go to the website and choose what brand of formula you’re using, it tells you which setting to put it on. It’s going to vary depending on the formula.
@tamistepanyuk4 жыл бұрын
LimitlessJess thanks dear! Already figured this out! And I do Not like this machine at all. Not mixing formula completely, not worth the money and Baby’s Health! Google reviews and people are not happy. Some complain of mold growing... I think I trust my self better then this machine
@AntoniaLeblanc19934 жыл бұрын
Hi what does powder setting means ?
@tamistepanyuk4 жыл бұрын
Antonia Griffin I cannot figure out either?! Do you know what does the powder setting mean
@AntoniaLeblanc19934 жыл бұрын
Tami Stepanyuk still don’t know
@tamistepanyuk4 жыл бұрын
Antonia Griffin I figure it out! Go to the website baby Brezza.com search for what settings for what formula. There is a whole list of different formulas and you need to pick a specific setting for specific formula. It’s very important. And some formulas are not compatible . I’m actually surprised why no one really talks about it they skip the formula setting part? I figure this out on my own and I hope this helps!
@AntoniaLeblanc19934 жыл бұрын
Tami Stepanyuk thank you so much 😘🙌🏾
@AwesomeSausage4 жыл бұрын
We really love ours. Has worked great so far, we have a 4 month old and really helps when we need a bottle quick. We got ours on Amazon: amzn.to/2urd2Qz
@corybillard63254 жыл бұрын
Did you do the monthly cleaning yet with the vinegar solution trying to find out how to do it thanks
@fionabartels47564 жыл бұрын
For the water container no. I only used distilled water. It doesn't leave a residue
@Yejielgomez4 жыл бұрын
Can you give me the pdf of all the formulas??
@fionabartels47564 жыл бұрын
You can go to the baby brezza website for their pdf
@katieo2c544 жыл бұрын
u can get it here--->amzn.to/32sOCRw
@mikesherwood39294 жыл бұрын
Just show me how it fucking works
@ericdufrane23444 жыл бұрын
What kind of water you use? Distilled, boiled or regular tap?
@sheilabritton12905 жыл бұрын
The heater is not working..how can I fix this
@fionabartels47564 жыл бұрын
I would contact baby brezza
@JuanMartinez-df1lc5 жыл бұрын
Becasue it's so hard making a bottle so now there a machine
@fionabartels47564 жыл бұрын
It helps for those 2 am and 4 am feedings.
@clauders.814 жыл бұрын
Try being a tired mother!
@catipps5 жыл бұрын
This one says it works with the soy I really want it
@jacquelinekashtan8735 жыл бұрын
How often to you have to clean the entire machine to eliminate risk of mold growth?
@blessed10994 жыл бұрын
Once a month with vinegar.
@TexasRebornMommaShow5165 жыл бұрын
for my reborn baby boy aka girl
@dayana87125 жыл бұрын
I get a question how many once make the formula setting # 7 for 3 once?
@dayana87125 жыл бұрын
I’m so confused with this machine. 😭😭😭
@fionabartels47565 жыл бұрын
I would chat with the company for an official answer. But I noticed the water mark will be on the dot. So if you only did water and for 3 ozs you get 3 ozs of water in the bottom. Because of the powder formula takes up more volume, it will be over 3 oz mark on the baby bottle. For me in the old formula we were using, it was about an oz more. But we switched formulas and I use a different setting now with rice cereal. My personal experience now is 5 oz of water, after formula powder and rice it's now at the 6/7oz mark when all said and done.
@fionabartels47565 жыл бұрын
I'm not 100% sure what your question is or the confusion is. But if you want 3 oz of formula baby bottle. You use set oz to 3. And per the company PDF formula setting chart, you use that number. That number is for how many spins the machine makes to dispense the powder into the water.
@fionabartels47564 жыл бұрын
Simple: 3 oz bottle: 2 oz of water and 1 oz formula. The powder adds an oz to the water amount.
@dayana87125 жыл бұрын
Hello Do you know why the machine doesn't boot the water or the formula? My machine got it a month ago and I got it back because I didn't work the water function. Ok, I've been traded my babybrezza machine for a new one, I M a month and a half, and now it doesn't work for me, it s the function of the formula. He doesn't want to dump the dust.
@fionabartels47565 жыл бұрын
I'm not sure what you mean by boot the formula. I would contact support from the company since it might be a function issue . I'll be making an updated video soon once I'm over the flu.
@PGChoir310875 жыл бұрын
Hey! How do you cut the machine off? I see instructions say power down then unplug. But I can’t find a power switch.
@fionabartels47565 жыл бұрын
I leave it on all the time cuz I still feed my daughter random times at night. I know the first models have a power switch but these models do not. If you are worried about mold, if you use it as much as I do, it's running all the time for me. Also on the temp mode, the first level is room temp so it doesn't heat the water. Which helps a lot.
@dianalai09045 жыл бұрын
hi~ i saw some complains that the formula getting caked, have you ever encountered that? what's the cons you think of this formula maker other than the parts cleaning?
@fionabartels47565 жыл бұрын
I get a little caked where the funnel meets the opening where the powder comes out. But I noticed it more when I switched to a formula that was a lot finer. It's just moisture in that area. But I open it up every 4 bottles to wipe it down with a dry paper towel in that spot to knock off any little bit of caking. My little issue I had was that when the company came out with the new unit, they didn't do my daughter formula that we switched to. So for months I had to wait and just use the water feature. Now they did the math and so I can use the full unit again. My "issue" now is that the tank is in the back to save side space but I can't see when the water is running out till when you have a screaming baby and there is no water in that tank.
@wytchyprepper33705 жыл бұрын
*whispers* It's 2019... A Fellow Jordie! :-)
@fionabartels47565 жыл бұрын
Thank you. The title has been edited to reflect the correct year ;)
@fionabartels47565 жыл бұрын
Jordan Essentials does not claim to cure any illness. Check with your doctor first if pregnant, nursing or taking medication. These statements have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure or prevent disease.
@fionabartels47565 жыл бұрын
Jordan Essentials does not claim to cure any illness. Check with your doctor first if pregnant, nursing or taking medication. These statements have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure or prevent disease.
@fionabartels47565 жыл бұрын
Jordan Essentials does not claim to cure any illness. Check with your doctor first if pregnant, nursing or taking medication. These statements have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure or prevent disease.
@fionabartels47565 жыл бұрын
Jordan Essentials does not claim to cure any illness. Check with your doctor first if pregnant, nursing or taking medication. These statements have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure or prevent disease.
@cantecante24105 жыл бұрын
Just got mine today. It's amazing. Alittle maintence is worth the accuracy and convenience.
@fionabartels47565 жыл бұрын
Ya I just throw the funnel thing in the dish washer at night to sanitize. I use to have 2 funnels. Came in handy when I was making more than 4 bottles a day.
@jewelsmariex5 жыл бұрын
hi!! can you please help. my son is on a high calorie formula 28 oz which is a mixture of 4 ounces water 3 scoops formula. could this machine do that? i can’t seem to figure that out
@fionabartels47565 жыл бұрын
I would contact the company to see if they can help. They have a list of formulas and what # to use for the formula setting. I need to make an update video on what I do with the machine now.
@austinwhitt96175 жыл бұрын
Hello, do you keep it plugged in or do you unplug it when your not using?
@fionabartels47565 жыл бұрын
I have it plugged in all the time
@amandabc285 жыл бұрын
Did you test the formula dispenser accuracy? I watched another video on the previous model on how to do this. She used a zip loc to catch the formula & then measured it. I just tried to do this on this model and the formula is way off! Kinda freaking out now.
@fionabartels47565 жыл бұрын
Yes I did that with a zip lock type bag too. At first it wasnt accurate cuz I just changed the oz setting. But after 2 runs on the same oz setting, it finally got it right.
@joshie199225 жыл бұрын
Check your settings
@erikaelimei4 жыл бұрын
Just a heads up. I had this. I checked it and it was putting out a scoop and a half of formula for 2 oz of water... way too much.. it was on the correct setting and cleaned. Just beware
@lindsaydupree92905 жыл бұрын
Did you sterilize your parts in a steam sterilizer?
@fionabartels47565 жыл бұрын
I used the top rack of dishwasher
@AviationDirection5 жыл бұрын
Does your Advanced leak at the water tank like mine? Love the product, but the leaking water tank is horrible. Finding other reviews, I'm not the only one with this problem.
@fionabartels47565 жыл бұрын
No leaks with mine. I hope the company can fix yours.
@DominiqueS_5625 жыл бұрын
How is the cleaning?
@fionabartels47565 жыл бұрын
It's the same like the older model. After about 4 bottles, the funnel sensor goes off to let you know it needs to be cleaned. With my last machine, I had two so I rotated them out. The top part where the formula is stored at is a pain to pull apart. it is super tight and when you're pulling on the orange part you feel like you're going to break it. finally when you do pull it apart the white pin that hold it all together comes flying out from the bottom so make sure you open it where you can't lose it.
@dumbblone366 жыл бұрын
What kind of water do you use in the tank?
@fionabartels47566 жыл бұрын
I use distilled water. You can use that or the baby water in the gallon jugs.