Thanks for watching. Usually, I record on my phone. I have the Galaxy S24Ultra but sometimes i use my gopro hero 7 black but i find my phone is way better quality.

Thanks for watching.

The ones i have on the TLR were some amazon cheapies I usually get those because the set is only like 28 dollars and if u glue them good they hold up well.

Thanks, I appreciate the feedback.

The battery im using is actually a XT30 connector and it almost fits perfect other than the center smart plug but it worked good enough for my test and ive ordered a 3s battery with the correct connector.

Funny that was the issue i had Bluetooth on but location off and it couldn't find the device. Thanks for watching.

Thanks for watching I love new car day lol.

I haven't tried that but its made for the stock slash body. But u may be able to make it work. I may have to try that one of these days. I was able to make it work on my nitro slash but it was still a stock slash body

Good to know. Thanks for watching. I left that gap open when i upgraded it so i should be able to do that also.

I see that now, I ordered one a while back just haven't installed it yet.

@TexasBasherRC I haven't needed one, also, if you ever want to go with a larger pinion ,(20t or higher) they make a spur gear that's a 55t instead of a 61t that comes stock, I put a 3s BLx in my arrma vortek 4x2 that has the same chassis. Only issue with going higher gear is, that motor hole is tight, so heat will be an issue, I just put my 55t in with my 20t pinion and the motor felt pretty warm to the touch, I need to get a heat gun to make sure I don't over heat it, although I think the esc will cut itself off if it does. Unsure, but it doesn't seem too too hot, I have a 40mm fan on it. I'm a rookie so I made the mistake of not getting the 4x4 for 120 more, so I'm stuck upgrading my 4x2 vortek, it's still ridiculously fast for a 2wd. I don't like bashing I honestly just like speed runs back and forth , I love it. I think mines going 60+ on 3s

I agree bearings were one of the first upgrades i did. Then went overboard lol.

DR10 actually but they're the same lol I had it laying around and it works well. Thanks for watching.

Yes it was, and It was Fast and would pull wheelies all the way down the street. I've since gotten rid of this rig and now have a few other 2wd models like the Gorgon and Nitro Slash.

Thanks for watching!

I've probably only ran maybe 6 batteries thru it since I went brushless. For a 2wd I still love it my only complaint is the flimsy body after a few good drops on its head from a failed backflip or two and it's already cracked and falling off the rear body post but that's more my fault that the truck I think im going to just get a regular body post kit for it and a stampede body or something.

@TexasBasherRC cool runnins. T.Y.

Mainly because I'm cheap lol. I had almost everything for it so im only in it like 50 bucks so far with the body and few other cheap items I needed. Plus I have a full build with my other truck. I'm planning on getting a few upgrades for it like shocks and some cheap brass that it.

Thanks. Im kinda liking the smaller trucks, i have a few other big rigs that are sitting in need to work on too. This one is cool im waiting on a few more upgrades to come in to make it even better.

I it üi

Ill have to check i think its a 21 due to the motor i chose i only had 1 pinion that would fit. Since then i have found a spacer they make for the gorgon to space the motor out so the wires dont hit but i have been happy with the way it is so i dont want to tear into it yet.

Its a higher quality servo all around, its brushless, metal gear and higher torque then stock seems smoother and holds better under stress.

Did it work with the stock ecm?

Yes it did but ive since upgraded to a furitek brushless system

I feel like Its worth it, I've bashed the heck out of my slash since i put these and they hold up well. I'm running a 4s spektrum system in it right now and have no issues.

Yea ive seen a few im not ready to get that yet but maybe in the future. Once i put spacers in the servo mount it made it alot better and im pretty happy with it at the moment.

Thanks it wasnt too bad. Thanks for watching

This is perfect as a 2wd I've had the Slayer Pro thats the 4wd version and they are both cool in their own way.

Yes u can bind the receiver to another remote but u won't have the AVC that's within the receiver itself. I've had no issues with my servo yet and i jump my typhon to the moon and bash the heck out of it.

Nice man thanks for watching. I love this thing. The lights are sweet especially if u get the pro scale kit too, it has turn signals and everything.

Thanks i want to get another body and do a nice custom paint job on it because im scratching this one to hell.

Thanks for watching this was a fun project i have since sold it to buy other vehicles.

Thanks for Watching. I like this one as far as a 2wd goes. It could use a little improvement but for now its a good basher.

Thanks for the feedback.

@@TexasBasherRC you're welcome and subscribed 👍

The link doesn't work but i was able to look it up i feel like that could work being that the wires come straight out the back so it wouldn't interfere.

I know it its crazy. Ive been surprised how capable it is especially now that ive added a few parts. Ill see what i can do about the 4tec i should have some footage i can put a video together i haven't driven it in a while its currentl broken on the shelf lol.

Yea it sucks i see why they did it with the screws so they wouldn't back out but dang. Oh well at least i was able to get it out and its a ripper now. Thanks for watching.

I got rid of that rig a while ago it just ended up sitting because u need the right time and place to run it. but i'm pretty sure some of the parts are interchangeable but not all of them.

Yea it would have been nice if they came out with a clipless kit for the nitro slash so we wouldn't need to modify them but seems like we are always modifying something on our RCs.

@@TexasBasherRC My slash is permanently broken... every time I fix a thing, something else breaks RIP.

I love my typhon i've only driven a kraton 6s once and it was pretty sweet but both are cool in their own way. I bash the heck out of my TLR typhon and it just takes it have only had to replace tires and an upper shock bolt that's all and i send it like 30 to 40 ft.

Thanks for the feedback i want to build another one that's a little bigger just haven't gotten around to it.

Thanks I agree, it helped a lot.

When i did the conversion i just went with a transmitter receiver combo from Jenny RC so i didn't have to bind anything but i have heard if u the the right receiver it will bind to the factory remote so u can keep the one that comes with it.

As of now im still running the AA batteries but i plan on adding a hump pack and no fail safe i haven't broke down and bought one yet.

Thanks the ramp makes all the difference for big air.

So far i really like it especially now that i brushless upgraded it. but even stock it was fun.

Thanks i want to build a V2 but haven't gotten around to it, this one is a little small now to work with my M41.

Nice man yea i couldn't pass it up the blue one is pretty cheap being it doesn't come with the battery or charger which i had already anyway. The motor i went with was a Reedy 3300KV out of my old drag DR10 i had dont know the measurements but im sure u could find something on the team associated website or next time i tear into it i'll take measurements. Thanks for watching.

The new axles came with screws so i used those.

Yes it does but being this is a 2 wheel drive version only the back wheels have brakes so it skids if u lock them up going fast