William Blanton

Пікірлер

@carmen161616 3 ай бұрын

If the thief does enter and realizes that the sensor alarm is not connected to a central security alarm system, still he can close the door or window quickly, steal whatever, and then a quick escape, with a quick opening-shutting of the door/window behind him, so the alarm stops making noise quickly when he/she enters or leaves the house...

@sonic2wb 3 ай бұрын

You are totally correct. this is more of alert to someone in the house. say in the bathroom or an upstairs bedroom etc.

@carmen161616 3 ай бұрын

@@sonic2wb thanks a lot for your answer... I still wonder if that kind of alarm (100dB) would deter a burglar from breaking in..

@tlc6756 4 ай бұрын

I just put mine up. When i set it on alarm it sounds off constantly (thats with the door/window closed and it not being opened). In the off position it stops, but when i open door it does nothing. Seems to work backwards. Any advice? Thx.

@luish19779 8 ай бұрын

Question - which external antenna you using ?

@sonic2wb 3 ай бұрын

Sorry its taken me so long to respond i believe its the Nagoya 771

@joemcallister2007 9 ай бұрын

nice it working good

@ahooo5617 11 ай бұрын

Can you post a link to how CPS is set up for this, I can get my Digital arps working but not the sms feature. Thank you

@ihus9950 11 ай бұрын

So was it a bad unloader valve on pressure switch? Or something else, I have 2475 7.5hp had that problem . Hope you got it fiqured out👍🏻

@BrianDFugate Жыл бұрын

I feel like the run winding is bad in that motor

@Genesislseries48574 Жыл бұрын

I bought mines for harbor freight store for $6 and the harbor freight versions one are better than the dollar tree version

@joemcallister2007 Жыл бұрын

nice landing

@n1kkri Жыл бұрын

if this is the older 878uv which firmware are you using that lets you send a APRS analog message?

@n1kkri Жыл бұрын

After updating my 878uv to firmware 1.27 I now have the choice to send Analog APRS SMS messages. I have successfully been able to send messages with the 878uv via local APRS repeaters, to SMSGTE gateway straight to friends cell phones. The 878uv can only transmit APRS analog. My 578 can do the same thing but also receive messages including friends using their cell phone using the SMSGTE gateway in reverse with the message showing up on my 578. I also tested via the local APRS digi repeater a message from one of my radios to another one of my radios.

@n1kkri Жыл бұрын

is it possible with analog APRS 144.49MHz to send a message directly to another Ham?

@Sabi1234567890Asdf Жыл бұрын

Well technically yes. Aslong as the transmit frequency on your radio And the recieve frequency on the other radio is the same. If ya really want to piss some people off broadcast aprs off the repeater. I find transmitting aprs off of the allocated frequency tends to piss off the idiots anyway.

@N4DJC Жыл бұрын

Mine beacons when locked. Set the beacon to auto along with your preferred timing, and TX once manually to start it…then lock it. If you don’t TX the first beacon manually it will not auto beacon.

@RookieLock Жыл бұрын

Thanks for this, I've been wondering how to take part in aprs thurstday.. Quick question though. If I would want to send myself (or someone) an aprs msg from my anytone 878uv II to my Yaesu ft5d what do I put in the widow "Input ID" Do I just put my call sign ? no ssid of -7 ?

@sonic2wb Жыл бұрын

You would add the ID of the other radio

@RookieLock Жыл бұрын

right. but id = callsign ? without the ssid?

@sonic2wb Жыл бұрын

@@RookieLock u would add the callsign and ssid of the yeasu. I can do a video as i have both radios. and would be glad to do one

@RookieLock Жыл бұрын

That would be great!

@PortableRadio Жыл бұрын

My ft-2d doesn't do that. It also needs less taps to go to the aprs menus, because it has a bigger screen. I'm still waiting for a handheld that supports aprs and has a good front end on 2m, because these wideband receivers are useless in the approximity of other transmitters. 73 Stephan

@sonic2wb Жыл бұрын

Yea apparently it's something in the firmware when u lock PTT it locks ALL PTT.. Thanks for the comment.

@HH-CA Жыл бұрын

a new firmware update needed to simply fix that issue

@stevensoto2288 Жыл бұрын

I think that the radio is working exactly like it is supposed to. There are several different lock settings (Item 9 in the config menu): Key, Dial, Key&Dial, PTT, Key&PTT, Dial&PTT, and All. If Key, Dial, or Key&Dial are selected and the radio is locked, it will still transmit APRS packets. If any of the PTT or "All" options are selected and the radio is locked, the radio assumes that you do not want to transmit, and therefore will not transmit APRS packets. I tested with the FT5DR, and it will transmit when locked as long as you don't choose a lock mode that includes PTT. I assume that it will operate the same way on the FT3DR. There are lots of good reasons to not upgrade from the FT3 to the FT5, but I don't think that this is one of them.

@wannabecarguy Жыл бұрын

I'm not using these functions but. The icon flashing doesn't mean it's not transmitting. I can still transmit when it's locked. Voice.

@K4MJV Жыл бұрын

What firmware version are you on? I am on 1.10 and that doesn't happen.

@sonic2wb Жыл бұрын

1.11 i think

@K4MJV Жыл бұрын

@@sonic2wb Looks like 1.11 is the latest. I was thinking about updating but now I will hold off. Thanks for the info.

@edwardyanceyjr Жыл бұрын

Glad i didn't move to the FT-5D. I love my FT-3D. Thanks for the heads up.

@toddone2371 2 жыл бұрын

Thanks for posting. 73, Todd KI4FVO

@southmountainoutdoors4628 2 жыл бұрын

We are going to miss him. You did great with this.

@HauntedBranch 2 жыл бұрын

What was the problem ?

@sonic2wb 2 жыл бұрын

IT was a power supply issue. and a bad motor.